eng_id can be negative and that stream_enc_regs[]
can be indexed out of bounds.
eng_id is used directly as an index into stream_enc_regs[], which has
only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can
access memory past the end of the array.
Add a bounds check using ARRAY_SIZE() before using eng_id as an index.
The unsigned cast also rejects negative values.
This avoids out-of-bounds access.
Fixes the below smatch error:
dcn*_resource.c: stream_encoder_create() may index
stream_enc_regs[eng_id] out of bounds (size 5).
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c
1246 static struct stream_encoder *dcn35_stream_encoder_create(
1247 enum engine_id eng_id,
1248 struct dc_context *ctx)
1249 {
...
1255
1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */
1257 if (eng_id <= ENGINE_ID_DIGF) {
ENGINE_ID_DIGF is 5. should <= be <?
Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative?
end_id is type signed long, but there are checks in the caller which prevent it from being negative.
1258 vpg_inst = eng_id;
1259 afmt_inst = eng_id;
1260 } else
1261 return NULL;
1262
...
1281
1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios,
1283 eng_id, vpg, afmt,
--> 1284 &stream_enc_regs[eng_id],
^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array.
...
1287 return &enc1->base;
1288 }
v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast
v3: The compiler already knows how to compare the two values, so the
cast (int) is not needed. (Roman)
Fixes: 2728e9c7c8 ("drm/amd/display: add DC changes for DCN351")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Virtual encoders & hwss were grouped in a separate directory,
not aligned with dio and link component structure.
[how]
Moved virtual_link_encoder and virtual_stream_encoder to dc/dio/virtual/.
Moved virtual_link_hwss to dc/link/hwss/ and renamed to link_hwss_virtual.
Removed dc/virtual/ directory.
Updated all includes and build files (Makefiles)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN 3.6+ hardware supports CRC-32 polynomial in addition to the
legacy CRC-16. Enable 32-bit CRC values per color component for
improvement of precision in display validation.
[How]
When userspace sets crc_poly_mode (0=CRC-16, 1=CRC-32) via the debugfs
interface, the value is stored in dm_irq_params.crc_poly_mode. When CRC
source configuration triggers amdgpu_dm_crtc_configure_crc_source(),
crc_poly_mode is retrieved from dm_irq_params and passed to
dc_stream_configure_crc().
In the DC layer, dc_stream_configure_crc() sets crc_poly_mode into the
crc_params structure and passes it to optc35_configure_crc(). If the
hardware supports the OTG_CRC_POLY_SEL register, the register is
programmed to select CRC-16 or CRC-32 polynomial.
When reading CRC values, optc35_get_crc() checks whether CRC32 register
masks are available. If present, it reads 32-bit CRC values from
OTG_CRC0/1_DATA_R32/G32/B32 registers; otherwise, it falls back
to reading 16-bit CRC values from legacy OTG_CRC0/1_DATA_RG/B
registers.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Direct DIO registers access in hwseq layer was creating register conflicts.
[how]
Migrated DIO registers from hwseq to dio component.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Post-driver cases always use linear tiling yet there is no dedicated
Gfx handling for this condition.
[How]
Add DcGfxBase/DalGfxBase to gfx version enums and set tiling to linear
when it is used. Also, enforce the use of proper tiling format as tiling
information is used.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For dcn2x_fast_validate_bw(), not only populate_dml_pipes needs FP guard
but also dml_get_voltage_level().
Remove unnecessary DC_FP_START/DC_FP_END guard in dcn20_fast_validate_bw
and dcn21_fast_validate_bw. FP guard is already there before calling
dcn2x_validate_bandwidth_fp().
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When transitioning from 640x480 at RBRx1 to HBR3x1,
both output pixel mode and pixel rate divider should update.
The needs_divider_update flag was only for 8b10b and 128b132b transition.
[How]
For DP tunneling, always update divider settings.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similarly to the analog_engine field, add a new analog_id field
which contains the encoder ID of the analog encoder that
corresponds to the link encoder.
Previously, the default encoder ID of the link encoder was used,
which meant that we passed the wrong ID in case of DVI-I.
Fixes: 5834c33fd3 ("drm/amd/display: Add concept of analog encoders (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Existing logic will treat color temperature update = full update, cause
user color temp adjustment goes wait for update logic and fsleep in that
cause the adjustment not smooth.
[How]
Let DCN35/351 to follow DCN401 to set default value to false.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudong Wang <fudong.wang@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
- After the addition of all OVT patches, DSC padding was being accounted
for multiple times, effectively doubling the padding
- This caused compliance failures or corruption
[HOW]
- Add padding to DSC pic width when required by HW, and do not re-add
when calculating reg values
- Do not add padding when computing PPS values, and instead track padding
separately to add when calculating slice width values
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The buffered cursor cap is expressed assuming a square cursor, and usage
of the cursor buffer is limited by the request size. For greater than 32
pixels, the request size is fixed at 256 bytes, so the maximum width
must be floored to the nearest 256th byte. At 4bpp this means even with
24kB DCN4 can only hold a 64x64 cursor in the buffer as even 65 pixels
would require 512 bytes per line instead of 256.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The BIOS uses this register to write the results of the
DAC_LoadDetection command, so we'll need to read this
in order to make DAC load detection work.
As a reference, I used the mmBIOS_SCRATCH_0 definition from
the amdgpu legacy display code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We support two kinds of analog connections:
1. DVI-I, which allows both digital and analog signals:
The DC code base only allows 1 encoder per connector, and the
preferred engine type is still going to be digital. So, for DVI-I
to work, we need to make sure the pre-existing link encoder can
also work with analog signals.
1. VGA, which only supports analog signals:
For VGA, we need to create a link encoder that only works with the
DAC without perturbing any digital transmitter functionality.
Since dce110_link_encoder already supports analog DVI-I,
just reuse that code for VGA as well.
v2:
Reduce code churn by reusing same link encoder for VGA and DVI-I.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add analog stream encoders for DCE which will be used when
connecting an analog display through VGA or DVI-I.
Considering that all stream encoder functions currently deal
with digital streams, there is nothing for an analog stream
encoder to do, making them basically a no-op.
That being said, we still need some kind of stream encoder to
represent an analog stream, and it is beneficial to split them
from digital stream encoders in the code to make sure they
don't accidentally write any DIG* registers.
On supported chips there is currently up to 1 analog encoder,
which is DACA. There are references to DACB in some code such
as VBIOS commands and register files but it seems to be
not present on DCE 6 and newer.
Set num_analog_stream_encoder = 1 so that we can support
the analog connectors on DCE 6-10, for now.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a num_analog_stream_encoders field to indicate how many
analog stream encoders are present. When analog stream encoders
are present, create them.
Additionally, add an analog_engine field to link encoders and
search for supported analog encoders in the BIOS for each link.
When connecting an RGB signal, search for analog stream encoders.
The actual DCE analog link and stream encoder is going to be
added in a subsequent commit.
v2:
Add check to see if an analog engine is really supported.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver does not pick up and save vbios's clocks during init clocks,
the dispclk in clk_mgr will keep 0.
OS might change the timing (lower the pixel clock) after boot.
Then driver will set the dispclk to lower when safe_to_lower is false,
for in clk_mgr dispclk is zero, it's illegal and causes garbage.
[How]
Dump and save the vbios's clocks, and init the dispclk in
dcn315_init_clocks.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc_check_update_surfaces_for_stream should not have access to entire
DC, especially not a mutable one. Concurrent checks should be able
to run independently of one another, without risk of changing state.
[How]
* Replace dc and stream_status structs with new dc_check_config.
* Move required fields from dc_debug and dc_caps to dc_check_config.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dml2 folder contains all logic for all versions of DML2
This is currently DML2.0 and DML2.1.
Rename dml2 to dml2_0 folder to reflect this better (dml2_0
for DML2.0).
[How]
Rename dml2 to dml2_0 folder and update dml2 references to
use dml2_0 folder.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: waynelin <Wayne.Lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
-OVT compliance testing for 5120x2880p300Hz YCbCr420 was failing due to
incorrect slice width being calculated
[How]
-Ensure slice width is divisible by 2 for 420 to comply with spec
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The point of isolating code that uses kernel mode FPU in separate
compilation units is to ensure that even implicit uses of, e.g., SIMD
registers for spilling occur only in a context where this is permitted,
i.e., from inside a kernel_fpu_begin/end block.
This is important on arm64, which uses -mgeneral-regs-only to build all
kernel code, with the exception of such compilation units where FP or
SIMD registers are expected to be used. Given that the compiler may
invent uses of FP/SIMD anywhere in such a unit, none of its code may be
accessible from outside a kernel_fpu_begin/end block.
This means that all callers into such compilation units must use the
DC_FP start/end macros, which must not occur there themselves. For
robustness, all functions with external linkage that reside there should
call dc_assert_fp_enabled() to assert that the FPU context was set up
correctly.
Fix this for the DCN35, DCN351 and DCN36 implementations.
Cc: Austin Zheng <austin.zheng@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Scaling doesn't work on DCE6 at the moment, the current
register programming produces incorrect output when using
fractional scaling (between 100-200%) on resolutions higher
than 1080p.
Disable it until we figure out how to program it properly.
Fixes: 7c15fd86aa ("drm/amd/display: dc/dce: add initial DCE6 support (v10)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dce100_validate_global function was verbatim exactly the
same as dce60_validate_global and dce80_validate_global.
Share dce100_validate_global between DCE6-10 to save code size.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE6-8 have very similar capabilities to DCE10, they support the
same DP and HDMI versions and work similarly.
Share dce100_validate_bandwidth between DCE6-10 to reduce code
duplication in the DC driver.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject modes with a pixel clock higher than the maximum display
clock. Use 400 MHz as a fallback value when the maximum display
clock is not known. Pixel clocks that are higher than the display
clock just won't work and are not supported.
With the addition of the YUV422 fallback, DC can now accidentally
select a mode requiring higher pixel clock than actually supported
when the DP version supports the required bandwidth but the clock
is otherwise too high for the display engine. DCE 6-10 don't
support these modes but they don't have a bandwidth calculation
to reject them properly.
Fixes: db291ed173 ("drm/amd/display: Add fallback path for YCBCR422")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver does not pick up and save vbios's clocks during init clocks,
the dispclk in clk_mgr will keep 0 until the first update clocks.
In some cases, OS changes the timing in the second set mode
(lower the pixel clock), causing the driver to lower the dispclk
in prepare bandwidth, which is illegal and causes grey screen.
[How]
1. Dump and save the vbios's clocks, and init the dispclk in
dcn314_init_clocks.
2. Fix the condition in dcn314_update_clocks, regarding a 0kHz value.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Reprogramming watermarks with stutter allowed can cause instability on
some ASICs. Disable it prior to raising watermarks (prepare bandwidth),
then re-enable after lowering (optimize bandwidth).
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC can turn off the display clock when no displays are connected
or when all displays are off, for reference see:
- dce*_validate_bandwidth
DC also assumes that the DP clock is always on and never powers
it down, for reference see:
- dce110_clock_source_power_down
In case of DCE 6.0 and 6.4, PLL0 is the clock source for both
the engine clock and DP clock, for reference see:
- radeon_atom_pick_pll
- atombios_crtc_set_disp_eng_pll
Therefore, PLL0 should be always kept running on DCE 6.0 and 6.4.
This commit achieves that by ensuring that by setting the display
clock to the corresponding value in low power state instead of
zero.
This fixes a page flip timeout on SI with DC which happens when
all connected displays are blanked.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
-Certain OVT timings require DSC configurations which divide the
horizontal active unevenly across DSC slices
-DSC slices must be even, so padding needs to be added to the active
to make this possible
-The pixel clock of the HW now needs to be increased to accommodate
the extra padded pixels
-To keep the line time the same, the blank of the HW timing needs to
be increased as well
[How]
-Calculate h_active padding, h_total padding, and pixel clock based
off of the original OVT timing and DSC calculations
-Store these values in the pipe and program HW with these modifications
-Added general support for cases where DSC slice config does not evenly
split the horizontal active by fixing some slice width calculations
-Updated PPS calculations for these cases
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Header file name "link.h" collides with system header when dc is
compiled as a user-mode library
[WHAT]
Rename link.h to link_service.h to avoid name collision
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm fixes from Dave Airlie:
"This is the fixes that built up in the merge window, mostly amdgpu and
xe with one i915 display fix, seems like things are pretty good for
rc1.
i915:
- DP LPFS fixes
xe:
- SRIOV: PF fixes and removal of need of module param
- Fix driver unbind around Devcoredump
- Mark xe driver as BROKEN if kernel page size is not 4kB
amdgpu:
- GC 9.5.0 fixes
- SMU fix
- DCE 6 DC fixes
- mmhub client ID fixes
- VRR fix
- Backlight fix
- UserQ fix
- Legacy reset fix
- Misc fixes
amdkfd:
- CRIU fix
- Debugfs fix"
* tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/amdgpu: add missing vram lost check for LEGACY RESET
drm/amdgpu/discovery: fix fw based ip discovery
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
amdgpu/amdgpu_discovery: increase timeout limit for IFWI init
drm/amdgpu: Update SDMA firmware version check for user queue support
drm/amdgpu: Add NULL check for asic_funcs
drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"
drm/amd/display: fix a Null pointer dereference vulnerability
drm/amd/display: Add primary plane to commits for correct VRR handling
drm/amdgpu: update mmhub 3.3 client id mappings
drm/amdgpu: update mmhub 3.0.1 client id mappings
drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job
drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.
drm/amd/display: Don't overwrite dce60_clk_mgr
drm/amdkfd: Fix checkpoint-restore on multi-xcc
drm/amd: Restore cached manual clock settings during resume
drm/amd: Restore cached power limit during resume
drm/amdgpu: Update external revid for GC v9.5.0
drm/amdgpu: Update supported modes for GC v9.5.0
Mark xe driver as BROKEN if kernel page size is not 4kB
...
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only
be used for DP. Make sure to initialize the correct amount of PLLs
in DC for these DCE versions and use PLL0 only for DP.
Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at
initialization as opposed to DCE 6.1 and 7.x which use a different
clock source for DFS.
The following functions were used as reference from the old
radeon driver implementation of DCE 6.x:
- radeon_atom_pick_pll
- atombios_crtc_set_disp_eng_pll
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 35222b5934)
Cc: stable@vger.kernel.org
[Why & How]
In theory, driver should be able to support disabling force pstate allow
after hardware release however this behavior is not tested yet.
Introducing a new toggle to disable the force on the fly.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only
be used for DP. Make sure to initialize the correct amount of PLLs
in DC for these DCE versions and use PLL0 only for DP.
Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at
initialization as opposed to DCE 6.1 and 7.x which use a different
clock source for DFS.
The following functions were used as reference from the old
radeon driver implementation of DCE 6.x:
- radeon_atom_pick_pll
- atombios_crtc_set_disp_eng_pll
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
