The system and GPU MMU page size might differ, which becomes a
problem for FW sections that need to be mapped at explicit addresses
since our PAGE_SIZE alignment might cover a VA range that's
expected to be used for another section.
Make sure we never map more than we need.
Changes in v3:
- Add R-bs
Changes in v2:
- Plan for per-VM page sizes so the MCU VM and user VM can
have different pages sizes
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030150231.768949-1-boris.brezillon@collabora.com
There are error messages like below that are occurring during stress
testing: "[ 31.004009] xe 0000:03:00.0: [drm] ERROR GT0: Global
invalidation timeout". Previously it was hitting this 3 out of 1000
executions of warm reboot. After raising it to 500, 1000 warm reboot
executions passed and it didn't fail.
Due to the way xe_mmio_wait32() is implemented, the timeout is able to
expire early when the register matches the expected value due to the
wait increments starting small. So, the larger timeout value should have
no effect during normal use cases.
v2 (Jonathan):
- rework the commit message
v3 (Lucas):
- add conclusive message for the fail rate and test case
v4:
- add suggested-by
Suggested-by: Jia Yao <jia.yao@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Tested-by: Zongyao Bai <zongyao.bai@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015161207.1373401-1-shuicheng.lin@intel.com
(cherry picked from commit 2eb460ab9f)
[ Fix conflict with gt->mmio ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.
Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.
Fixes: 67ea53a4bd ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8a79f7cdbb)
Cc: stable@vger.kernel.org
[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.
Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b47278cec)
Cc: stable@vger.kernel.org
If a BIOS provides bad data in response to an ATIF method call
this causes a NULL pointer dereference in the caller.
```
? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1))
? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434)
? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2))
? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1))
? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642)
? exc_page_fault (arch/x86/mm/fault.c:1542)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu
```
It has been encountered on at least one system, so guard for it.
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c9b7c809b8)
Cc: stable@vger.kernel.org
Depending on x86 and KVM is not enough, as the kvm helper functions
that get called here are controlled by CONFIG_KVM_X86, which is
disabled if both KVM_INTEL and KVM_AMD are turned off.
ERROR: modpost: "kvm_write_track_remove_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_register_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_page_track_unregister_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
ERROR: modpost: "kvm_write_track_add_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined!
Change the dependency to CONFIG_KVM_X86 instead.
Fixes: ea4290d77b ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015152157.2955229-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 341e402303)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Driver Changes:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/jkldrex5733ldxrla75b4ayvhujjhw2kccmasl5rotoufoacj4@pkvlrrv4orc7
Fixes for v6.12
Display:
- move CRTC resource assignment to atomic_check otherwise to make
consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
this leads to false timeouts
GPU:
- a7xx: add a fence wait before SMMU table update
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsp3Zbd_H3FhHdRz9yCYA4wxX4SenpYRSk=Mx2d8GMSuQ@mail.gmail.com
The BSpec says that EN_L3_RW_CCS_CACHE_FLUSH must be toggled
on for manual global invalidation to take effect and actually flush
device cache, however this also turns on flushing for things like
pipecontrol, which occurs between submissions for compute/render. This
sounds like massive overkill for our needs, where we already have the
manual flushing on the display side with the global invalidation. Some
observations on BMG:
1. Disabling l2 caching for host writes and stubbing out the driver
global invalidation but keeping EN_L3_RW_CCS_CACHE_FLUSH enabled, has
no impact on wb-transient-vs-display IGT, which makes sense since the
pipecontrol is now flushing the device cache after the render copy.
Without EN_L3_RW_CCS_CACHE_FLUSH the test then fails, which is also
expected since device cache is now dirty and display engine can't see
the writes.
2. Disabling EN_L3_RW_CCS_CACHE_FLUSH, but keeping the driver global
invalidation also has no impact on wb-transient-vs-display. This
suggests that the global invalidation still works as expected and is
flushing the device cache without EN_L3_RW_CCS_CACHE_FLUSH turned on.
With that drop EN_L3_RW_CCS_CACHE_FLUSH. This helps some workloads since
we no longer flush the device cache between submissions as part of
pipecontrol.
Edit: We now also have clarification from HW side that BSpec was indeed
wrong here.
v2:
- Rebase and update commit message.
BSpec: 71718
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Vitasta Wattal <vitasta.wattal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007074541.33937-2-matthew.auld@intel.com
(cherry picked from commit 67ec9f87bd)
[ Fix conflict due to changed xe_mmio_write32() signature ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Starting with Xe2 the timestamp is a full 64 bit counter, contrary to
the 36 bit that was available before. Although 36 should be sufficient
for any reasonable delta calculation (for Xe2, of about 30min), it's
surprising to userspace to get something truncated. Also if the
timestamp being compared to is coming from the GPU and the application
is not careful enough to apply the width there, a delta calculation
would be wrong.
Extend it to full 64-bits starting with Xe2.
v2: Expand width=64 to media gt, as it's just a wrong tagging in the
spec - empirical tests show it goes beyond 36 bits and match the engines
for the main gt
Bspec: 60411
Cc: Szymon Morek <szymon.morek@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011035618.1057602-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 9d559cdcb2)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently we can call fence_fini() twice if something goes wrong when
sending the GuC CT for the tlb request, since we signal the fence and
return an error, leading to the caller also calling fini() on the error
path in the case of stack version of the flow, which leads to an extra
rpm put() which might later cause device to enter suspend when it
shouldn't. It looks like we can just drop the fini() call since the
fence signaller side will already call this for us.
There are known mysterious splats with device going to sleep even with
an rpm ref, and this could be one candidate.
v2 (Matt B):
- Prefer warning if we detect double fini()
Fixes: f002702290 ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009084808.204432-3-matthew.auld@intel.com
(cherry picked from commit cfcbc0520d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
