The BSpec says that EN_L3_RW_CCS_CACHE_FLUSH must be toggled
on for manual global invalidation to take effect and actually flush
device cache, however this also turns on flushing for things like
pipecontrol, which occurs between submissions for compute/render. This
sounds like massive overkill for our needs, where we already have the
manual flushing on the display side with the global invalidation. Some
observations on BMG:
1. Disabling l2 caching for host writes and stubbing out the driver
global invalidation but keeping EN_L3_RW_CCS_CACHE_FLUSH enabled, has
no impact on wb-transient-vs-display IGT, which makes sense since the
pipecontrol is now flushing the device cache after the render copy.
Without EN_L3_RW_CCS_CACHE_FLUSH the test then fails, which is also
expected since device cache is now dirty and display engine can't see
the writes.
2. Disabling EN_L3_RW_CCS_CACHE_FLUSH, but keeping the driver global
invalidation also has no impact on wb-transient-vs-display. This
suggests that the global invalidation still works as expected and is
flushing the device cache without EN_L3_RW_CCS_CACHE_FLUSH turned on.
With that drop EN_L3_RW_CCS_CACHE_FLUSH. This helps some workloads since
we no longer flush the device cache between submissions as part of
pipecontrol.
Edit: We now also have clarification from HW side that BSpec was indeed
wrong here.
v2:
- Rebase and update commit message.
BSpec: 71718
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Vitasta Wattal <vitasta.wattal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241007074541.33937-2-matthew.auld@intel.com
(cherry picked from commit 67ec9f87bd)
[ Fix conflict due to changed xe_mmio_write32() signature ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
With exception of "Tuning: L3 cache - media", we are currently applying
recommended performance tuning settings only for the primary GT. Let's
also implement them for the media GT when applicable.
According to our spec, media GT registers CCCHKNREG1 and L3SQCREG* exist
only in Xe2_LPM and their offsets do not match their primary GT
counterparts. Furthermore, the range where CCCHKNREG1 belongs is not
listed as a multicast range on the media GT. As such, we need to have
Xe2_LPM-specific definitions for those registers and apply the setting
only for that specific IP.
Both Xe2_HPM and Xe2_LPM contain STATELESS_COMPRESSION_CTRL and the
offset on the media GT matches the one on the primary one. So we can
simply have a copy of "Tuning: Stateless compression control" for the
media GT.
v2:
- Fix implementation with respect to multicast vs non-multicast
registers. (Matt)
- Add missing XE2LPM_CCCHKNREG1 on second action of "Tuning:
Compression Overfetch - media".
v3:
- STATELESS_COMPRESSION_CTRL on Xe2_HPM is also a multicast register,
do not define a XE2HPM_STATELESS_COMPRESSION_CTRL register. (Tejas)
Bspec: 72161
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240920211459.255181-3-gustavo.sousa@intel.com
(cherry picked from commit e1f813947c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
Enable feature to allow memory reads to take a priority memory path.
This will reduce latency on the read path, but may introduce read after
write (RAW) hazards as read and writes will no longer be ordered.
To avoid RAW hazards, SW can use the MI_MEM_FENCE command or any other
MI command that generates non posted memory writes. This will ensure
data is coherent in memory prior to execution of commands which read
data from memory. RCS,BCS and CCS support this feature.
No pattern identified in KMD that could lead to a hazard.
v2: Modify commit message, enable priority mem read feature for media,
modify version range, modify bspec detail (Matt Roper)
v3: Rebase, fix cramped line-wrapping (jcavitt)
v4: Rebase
v5: Media does not support Priority Mem Read. Modify commit
to reflect the same.
v6: Rebase
Bspec: 60298, 60237, 60187, 60188
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Carl Zhang <carl.zhang@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731195622.1868401-1-pallavi.mishra@intel.com
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
GuC loading can take longer than it is supposed to for various
reasons. So add in the code to cope with that and to report it when it
happens. There are also many different reasons why GuC loading can
fail, so add in the code for checking for those and for reporting
issues in a meaningful manner rather than just hitting a timeout and
saying 'fail: status = %x'.
Also, remove the 'FIXME' comment about an i915 bug that has never been
applicable to Xe!
v2: Actually report the requested and granted frequencies rather than
showing granted twice (review feedback from Badal).
v3: Locally code all the timeout and end condition handling because a
helper function is not allowed (review feedback from Lucas/Rodrigo).
v4: Add more documentation comments and rename a define to add units
(review feedback from Lucas).
v5: Fix copy/paste error in xe_mmio_wait32_not (review feedback from
Lucas) and rebase (no more return value from guc_wait_ucode).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240518043700.3264362-3-John.C.Harrison@Intel.com
VF's drivers can't modify GGTT PTEs except the range explicitly
assigned by the PF driver. To allow hardware enforcement of this
requirement, each GGTT PTE has a field with the VF number that
identifies which VF can modify that particular GGTT PTE entry.
Only PF driver can modify this field and PF driver shall do that
before VF drivers will be loaded. Add function to prepare PTEs.
Since it will be used only by the PF driver, make it available
only for CONFIG_PCI_IOV=y.
Bspec: 45015, 52395
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-3-michal.wajdeczko@intel.com
Generate the mask of enabled L3 banks for the GT. It is stored with the
rest of the GT topology in a consistent representation across platforms.
For now the L3 bank mask is just printed in the log for developers to
easily figure out the fusing characteristics of machines that they are
trying to debug issues on. Later it can be used to replace existing code
in the driver that requires the L3 bank count (not mask). Also the mask
can easily be exposed to user space in a new query if needed.
v2: Better naming of variable and function (Matt Roper)
Bspec: 52545, 52546, 62482
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410123723.7-2-francois.dugast@intel.com
