The accelerator device supports usage statistics. This patch enables
obtaining the accelerator's usage through the "dev_usage" file.
The returned number expressed as a percentage as a percentage.
Signed-off-by: Zongyu Wu <wuzongyu1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Originally, when a queue was requested, it could only be configured
with the default algorithm type of 0. Now, when multiple tfms use
the same queue, the queue must be selected based on its attributes
to meet the requirements of tfm tasks. So the algorithm type
attribute of queue need to be distinguished. Just like a queue used
for compression in ZIP cannot be used for decompression tasks.
Fixes: 3f1ec97aac ("crypto: hisilicon/qm - Put device finding logic into QM")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When an error occurs on the device, an interrupt is reported.
When the firmware forwards the interrupt to the driver and masks the
error. If the driver does not enable error reporting when an error does
not need to be reset, the device does not report the error to the driver
when the error occurs again. Therefore, after the driver obtains the
information, the error reporting needs to be enabled again.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After the device memory is cleared, if the software sends
the doorbell operation, the hardware may trigger a axi error
when processing the doorbell. This error is caused by memory
clearing and hardware access to address 0. Therefore, the axi
error is masked during this period.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current hisilicon zip supports the new algorithms lz77_only and
lz4. To enable user space to recognize the new algorithm support,
add lz77_only and lz4 to the sysfs. Users can now use the new
algorithms through uacce.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In stream mode, the hardware needs to combine the length of the
previous literal to calculate the length of the current literal.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After enabling address prefetch, check the sva module status. If all
previous prefetch requests from the sva module are not completed, then
disable the address prefetch to ensure normal execution of new task
operations. After disabling address prefetch, check if all requests
from the sva module have been completed.
Fixes: a5c164b195 ("crypto: hisilicon/qm - support address prefetching")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the device resumes from a suspended state, it will revert to its
initial state and requires re-enabling. Currently, the address prefetch
function is not re-enabled after device resuming. Move the address prefetch
enable to the initialization process. In this way, the address prefetch
can be enabled when the device resumes by calling the initialization
process.
Fixes: 607c191b37 ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When configuring the high-performance mode register, there is no
need to verify whether the register has been successfully
enabled, as there is no possibility of a write failure for this
register.
Fixes: a9864bae18 ("crypto: hisilicon/zip - add zip comp high perf mode configuration")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On the HiSilicon accelerators drivers, the PF/VFs driver can send messages
to the VFs/PF by writing hardware registers, and the VFs/PF driver receives
messages from the PF/VFs by reading hardware registers. To support this
feature, a new version id is added, different communication mechanism are
used based on different version id.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The error detection of the data aggregation feature is separated from
the compression/decompression feature. This patch enables the error
detection and reporting of the data aggregation feature. When an
unrecoverable error occurs in the algorithm core, the device reports
the error to the driver, and the driver will reset the device.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zip device adds data aggregation feature, data with the
same key can be combined.
This patch enables the device data aggregation feature.
New feature is called "hashagg" name and registered to
the uacce subsystem to allow applications to submit data
aggregation operations in user space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If an error indicating that the device needs to be reset is reported,
disable the error reporting before device reset is complete,
enable the error reporting after the reset is complete to prevent
the same error from being reported repeatedly.
Fixes: eaebf4c3b1 ("crypto: hisilicon - Unify hardware error init/uninit into QM")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Query the capability register status of accelerator devices
(SEC, HPRE and ZIP) through the debugfs interface, for example:
cat cap_regs. The purpose is to improve the robustness and
locability of hardware devices and drivers.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure that the inline function contains no more than 10 lines.
move q_num_set() from hisi_acc_qm.h to qm.c.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before the device is enabled again, the device may still
store the previously processed data. If an error occurs in
the previous task, the device may fail to be enabled again.
Therefore, before enabling device, reset the device to restore
the initial state.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the reg is queried based on the fixed address offset
array. When the number of accelerator cores changes, the system
can not flexibly respond to the change.
Therefore, the reg to be queried is calculated based on the
comp or decomp core base address.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a scenario where the file directory is created but the
file memory is not set. In this case, if a user accesses the
file, an error occurs.
So during the creation process of debugfs, memory should be
allocated first before creating the directory. In the release
process, the directory should be deleted first before releasing
the memory to avoid the situation where the memory does not
exist when accessing the directory.
In addition, the directory released by the debugfs is a global
variable. When the debugfs of an accelerator fails to be
initialized, releasing the directory of the global variable
affects the debugfs initialization of other accelerators.
The debugfs root directory released by debugfs init should be a
member of qm, not a global variable.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Switch to raw_smp_processor_id() to prevent a number of
warnings from kernel debugging. We do not care about
preemption here, as the CPU number is only used as a
poor mans load balancing or device selection. If preemption
happens during an encrypt/decrypt operation a small performance
hit will occur but everything will continue to work, so just
ignore it. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").
[ 7538.874350] BUG: using smp_processor_id() in preemptible [00000000] code: af_alg06/8438
[ 7538.874368] caller is debug_smp_processor_id+0x1c/0x28
[ 7538.874373] CPU: 50 PID: 8438 Comm: af_alg06 Kdump: loaded Not tainted 5.10.0.pc+ #18
[ 7538.874377] Call trace:
[ 7538.874387] dump_backtrace+0x0/0x210
[ 7538.874389] show_stack+0x2c/0x38
[ 7538.874392] dump_stack+0x110/0x164
[ 7538.874394] check_preemption_disabled+0xf4/0x108
[ 7538.874396] debug_smp_processor_id+0x1c/0x28
[ 7538.874406] sec_create_qps+0x24/0xe8 [hisi_sec2]
[ 7538.874408] sec_ctx_base_init+0x20/0x4d8 [hisi_sec2]
[ 7538.874411] sec_aead_ctx_init+0x68/0x180 [hisi_sec2]
[ 7538.874413] sec_aead_sha256_ctx_init+0x28/0x38 [hisi_sec2]
[ 7538.874421] crypto_aead_init_tfm+0x54/0x68
[ 7538.874423] crypto_create_tfm_node+0x6c/0x110
[ 7538.874424] crypto_alloc_tfm_node+0x74/0x288
[ 7538.874426] crypto_alloc_aead+0x40/0x50
[ 7538.874431] aead_bind+0x50/0xd0
[ 7538.874433] alg_bind+0x94/0x148
[ 7538.874439] __sys_bind+0x98/0x118
[ 7538.874441] __arm64_sys_bind+0x28/0x38
[ 7538.874445] do_el0_svc+0x88/0x258
[ 7538.874447] el0_svc+0x1c/0x28
[ 7538.874449] el0_sync_handler+0x8c/0xb8
[ 7538.874452] el0_sync+0x148/0x180
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of the zip alg support related capability
register in hisi_zip_qm_init(), which will be called by hisi_zip_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset failed
and the memory space disabled.
Fixes: db700974b6 ("crypto: hisilicon/zip - support zip capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To meet specific application scenarios, the function of switching between
the high performance mode and the high compression mode is added.
Use the perf_mode=0/1 configuration to set the compression high perf mode,
0(default, high compression mode), 1(high performance mode). These two
modes only apply to the compression direction and are compatible with
software algorithm in both directions.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'offset' type is unsigned long in 'struct debugfs_reg32',
so type of values casts to unsigned long long is incorrect, and the
values do not require type cast, remove them.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the Kunpeng accelerator executes tasks such as encryption
and decryption have minimum requirements on the number of device
queues. If the number of queues does not meet the requirement,
the process initialization will fail. Therefore, the driver checks
the number of queues on the device before registering the algorithm.
If the number does not meet the requirements, the driver does not register
the algorithm to crypto subsystem, the device is still added to the
qm_list.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.
After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.
Fixes: 8bbecfb402 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The last register logic and different register logic are combined.
Use "u32" instead of 'int' in the regs function input parameter to
simplify some checks.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of qm algorithm can change dynamically according to the
value of the capability register.
Add xxx_set_qm_algs() function to obtain the algs that the
hardware device supported from the capability register and set
them into usr mode attribute files.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add function 'hisi_zip_alg_support' to get device configuration
information from capability registers, instead of determining whether
to register an algorithm based on hardware platform's version.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware V3 and later versions support get error type from
registers. To be compatible with later hardware versions,
get error type from registers instead of fixed marco.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware V3 and later versions can obtain qp num and depth supported
by the hardware from registers. To be compatible with later hardware
versions, get qp num and depth from registers instead of fixed marcos.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before hardware V3, hardwares do not provide the feature registers,
driver resolves hardware differences based on the hardware version.
As a result, the driver does not support the new hardware.
Hardware V3 and later versions support to obtain hardware features,
such as power-gating management and doorbell isolation, through
the hardware registers. To be compatible with later hardware versions,
the features of the current device is obtained by reading the
hardware registers instead of the hardware version.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some cleanup for code:
1. Change names for easy to understand.
2. Unify the variables type.
3. Use the right return value.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before stopping the function, the driver needs to flush all the remaining
work about event irq. Therefore, accelerator drivers use a private
workqueue(qm->wq) to handle event irq instead of the system workqueue.
This patch moves alloc workqueue from sec_main.c and zip_main.c to qm.c.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Add some debugging registers.
2. Add last word dumping function during zip engine controller reset.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of the register is changed after the task running. A debugfs
file node is added to help users to check the change of register values.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For Kunpeng 920, the bit 0 of register 'HZIP_SGL_RUSER_32_63' stand for
whether the ssid is valid. So this bit should be set as valid for sva mode.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To avoid repeatedly obtaining 'qm' from 'filp', parameter passing of
debugfs function directly use 'qm' instead of 'filp'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The accelerator devices support runtime PM, when device is in suspended, an
exception will occur if reading registers. Therefore, this patch uses
'debugfs_create_file' instead of 'debugfs_create_regset32' to create
debugfs file, and then the driver can get the device status before
reading the register.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 zip device supports dynamic clock gating. When executing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables zip dynamic clock gating by writing hardware registers.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ZIP driver support configure each function's QoS in the Host
for Kunpeng930. The ZIP driver needs to configure the maximum shaper
type rate.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
