Drop the debugfs implementation of the ECDSA message signing, in
preparation for a new implementation via the keyctl() syscall.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suzuki writes:
coresight: updates for Linux v6.15
CoreSight self-hosted tracing driver subsystem update for Linux v6.15.
The update includes:
- CoreSight trace capture for Panic/Watchdog timeouts
- Fixes to ETM4x driver to synchronize register reads as required by the TRM
- Support for Qualcomm CoreSight TMC Control Unit driver
- Conversion of device locks to raw_spinlock for components that are used
by the Perf mode.
- Miscellaneous fixes for the subsystem
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (41 commits)
Coresight: Fix a NULL vs IS_ERR() bug in probe
coresight: configfs: Constify struct config_item_type
coresight: docs: Remove target sink from examples
coresight/ultrasoc: change smb_drv_data spinlock's type to raw_spinlock_t
coresight-tmc: change tmc_drvdata spinlock's type to raw_spinlock_t
coresight-replicator: change replicator_drvdata spinlock's type to raw_spinlock_t
coresight-funnel: change funnel_drvdata spinlock's type to raw_spinlock_t
coresight-etb10: change etb_drvdata spinlock's type to raw_spinlock_t
coresight-cti: change cti_drvdata spinlock's type to raw_spinlock_t
coresight: change coresight_trace_id_map's lock type to raw_spinlock_t
coresight-etm4x: change etmv4_drvdata spinlock type to raw_spinlock_t
coresight: change coresight_device lock type to raw_spinlock_t
coresight: add verification process for coresight_etm_get_trace_id
Coresight: Add Coresight TMC Control Unit driver
dt-bindings: arm: Add Coresight TMC Control Unit hardware
Coresight: Change functions to accept the coresight_path
Coresight: Change to read the trace ID from coresight_path
Coresight: Allocate trace ID after building the path
Coresight: Introduce a new struct coresight_path
Coresight: Use coresight_etm_get_trace_id() in traceid_show()
...
Patch series "hugetlb/CMA improvements for large systems", v5.
On large systems, we observed some issues with hugetlb and CMA:
1) When specifying a large number of hugetlb boot pages (hugepages= on
the commandline), the kernel may run out of memory before it even gets
to HVO. For example, if you have a 3072G system, and want to use 3024
1G hugetlb pages for VMs, that should leave you plenty of space for the
hypervisor, provided you have the hugetlb vmemmap optimization (HVO)
enabled. However, since the vmemmap pages are always allocated first,
and then later in boot freed, you will actually run yourself out of
memory before you can do HVO. This means not getting all the hugetlb
pages you want, and worse, failure to boot if there is an allocation
failure in the system from which it can't recover.
2) There is a system setup where you might want to use hugetlb_cma with
a large value (say, again, 3024 out of 3072G like above), and then
lower that if system usage allows it, to make room for non-hugetlb
processes. For this, a variation of the problem above applies: the
kernel runs out of unmovable space to allocate from before you finish
boot, since your CMA area takes up all the space.
3) CMA wants to use one big contiguous area for allocations. Which
fails if you have the aforementioned 3T system with a gap in the middle
of physical memory (like the < 40bits BIOS DMA area seen on some AMD
systems). You then won't be able to set up a CMA area for one of the
NUMA nodes, leading to loss of half of your hugetlb CMA area.
4) Under the scenario mentioned in 2), when trying to grow the number
of hugetlb pages after dropping it for a while, new CMA allocations may
fail occasionally. This is not unexpected, some transient references
on pages may prevent cma_alloc from succeeding under memory pressure.
However, the hugetlb code then falls back to a normal contiguous alloc,
which may end up succeeding. This is not always desired behavior. If
you have a large CMA area, then the kernel has a restricted amount of
memory it can do unmovable allocations from (a well known issue). A
normal contiguous alloc may eat further in to this space.
To resolve these issues, do the following:
* Add hooks to the section init code to do custom initialization of
memmap pages. Hugetlb bootmem (memblock) allocated pages can then be
pre-HVOed. This avoids allocating a large number of vmemmap pages early
in boot, only to have them be freed again later, and also avoids running
out of memory as described under 1). Using these hooks for hugetlb is
optional. It requires moving hugetlb bootmem allocation to an earlier
spot by the architecture. This has been enabled on x86.
* hugetlb_cma doesn't care about the CMA area it uses being one large
contiguous range. Multiple smaller ranges are fine. The only
requirements are that the areas should be on one NUMA node, and
individual gigantic pages should be allocatable from them. So,
implement multi-range support for CMA, avoiding issue 3).
* Introduce a hugetlb_cma_only option on the commandline. This only
allows allocations from CMA for gigantic pages, if hugetlb_cma= is also
specified.
* With hugetlb_cma_only active, it also makes sense to be able to
pre-allocate gigantic hugetlb pages at boot time from the CMA area(s).
Add a rudimentary early CMA allocation interface, that just grabs a
piece of memblock-allocated space from the CMA area, which gets marked
as allocated in the CMA bitmap when the CMA area is initialized. With
this, hugepages= can be supported with hugetlb_cma=, making scenario 2)
work.
Additionally, fix some minor bugs, with one worth mentioning: since
hugetlb gigantic bootmem pages are allocated by memblock, they may span
multiple zones, as memblock doesn't (and mostly can't) know about zones.
This can cause problems. A hugetlb page spanning multiple zones is bad,
and it's worse with HVO, when the de-HVO step effectively sneakily
re-assigns pages to a different zone than originally configured, since the
tail pages all inherit the zone from the first 60 tail pages. This
condition is not common, but can be easily reproduced using ZONE_MOVABLE.
To fix this, add checks to see if gigantic bootmem pages intersect with
multiple zones, and do not use them if they do, giving them back to the
page allocator instead.
The first patch is kind of along for the ride, except that maintaining an
available_count for a CMA area is convenient for the multiple range
support.
This patch (of 27):
In addition to the number of allocations and releases, system management
software may like to be aware of the size of CMA areas, and how many pages
are available in it. This information is currently not available, so
export it in total_page and available_pages, respectively.
The name 'available_pages' was picked over 'free_pages' because 'free'
implies that the pages are unused. But they might not be, they just
haven't been used by cma_alloc
The number of available pages is tracked regardless of CONFIG_CMA_SYSFS,
allowing for a few minor shortcuts in the code, avoiding bitmap
operations.
Link: https://lkml.kernel.org/r/20250228182928.2645936-2-fvdl@google.com
Signed-off-by: Frank van der Linden <fvdl@google.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xu writes:
FPGA Manager changes for 6.15-rc1
- Peter's change updates his email address.
- Kuhanh's change increases timeout for altera-cvp driver
- Arnd's change removes incorrect of_match_ptr
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: versal: remove incorrect of_match_ptr annotation
fpga: altera-cvp: Increase credit timeout
fpga: m10bmc-sec: update email address for Peter Colberg
Jonathan writes:
IIO: New device support, features and cleanup for the 6.15 cycle.
The usual mixture of new drivers, support in existing drivers for new
devices, a range of features and general subsystem cleanup.
Two merges of immutable branches in here:
* SPI offload support. Culmination of a long effort to bring the ability
to offload triggered sequences of SPI operations to specific hardware,
allow high datarate acquisition over an SPI bus (if you have the right
hardware / FPGA firmware)
* GPIO set-array-helper - enables code simplification.
New device support
==================
adi,ad3552r-hs:
- Add support for AD3541r and AD3542r via newly supported FPGA HDL.
adi,ad4030
- New driver supporting the AD4030, AD4630 AD4630-16, AD4640-24, AD4632-16,
AD4632-24 1 and 2 channel high precision SPI ADCs.
adi,ad4851
- New driver and backend support for the AD4851, AD4852, AD4853, AD4854,
AD4855, AD4846, AD4857, AD4858 and AD4858I high speed multichannel
simultaneous sampling ADCs.
adi,ad7191
- New driver for this 24-bit ADC for precision bridge applications,
adi,ad7380
- Add support for the adaq4381-4 which is a 14-bit version of the
already supported adaq4380-1
adi,adis16550
- New driver using the ADIS library (which needed extensions) for this
IMU.
brcm,apds9160
- New driver for this proximity and ambient light sensor.
dynaimage,al3000a
- New driver for this illuminance sensor.
mcube,mc3230
- Add support for the mc3510c accelerometer with a different scale to existing
supported parts (some rework preceded this)
nxp,imx93
- Add compatibles for imx94 and imx95 which are fully compatible with imx93.
rockchip,saradc
- Add support for the RK3528 ADC
- Add support for the RK3562 ADC
silab,si7210
- New driver to support this I2C Hall effect magnetic position sensor.
ti,ads7138
- New driver supporting the ADS7128 and AD7138 I2C ADCs.
Staging driver drop
===================
adi,adis16240
- Drop this impact sensor. Interesting part but complex hence never left
staging due to ABI challenges. No longer readily available so drop driver.
New features
============
Documentation
- A really nice overview document introduce ADC terminology and how
it maps to IIO.
core
- New description for FAULT events, used in the ad7173.
- filter_type ABI used in ad4130.
buffer-dmaengine
- Split DMA channel request from buffer allocation (for SPI offload)
- Add a new _with_handle setup variant. (for SPI offload)
adi,adf4371
- Add control of reference clock type and support for frequency doubling
where appropriate.
adi,ad4695
- Support SPI offload.
- Support oversampling control.
adi,ad5791
- Support SPI offload.
adi,ad7124
- Add channel calibration support.
adi,ad7380:
- Alert support (threshold interrupts)
- SPI offload support.
adi,ad7606
- Support writing registers when using backend enabling software control
of modes.
adi,ad7944
- Support SPI offload.
adi,ad9832
- Use devm_regulator_get_enable() to simplify code.
adi,ad9834
- Use devm_regulator_get_enable() to simplify code.
adi,adxl345
- Improve IRQ handling code.
- Add debug access to registers.
bosch,bmi270
- Add temperature channel support.
- Add data ready trigger.
google,cross_ec
- Add trace events.
mcube,mc3230
- Add mount matrix support
- Add an OF match table.
Cleanup and minor bug fixes
===========================
Tree wide:
- Stop using iio_device_claim_direct_scoped() and introduce sparse friendly
iio_device_claim/release_direct()
The conditional scoped cleanup has proved hard to deal with, requiring
workarounds for various compiler issues and in is rather non-intuitive
so abandon that experiment. One of the attractions of that approach was
that it made it much harder to have unbalanced claim/release bugs so
instead introduce a conditional-lock style boolean returning new pair
of functions. These are inline in the header and have __acquire and
__release calls allowing sparse to detect lack of balance. There are
occasional false positives but so far those have reflected complex code
paths that benefited from cleanup anyway.
The first set of driver conversions are in this pull request, more to
follow next cycle. Various related cleanup in drivers.
Removal of the _scoped code is completed and the definition removed.
- Use of str_enable_disable() and similar helpers.
- Don't set regmap cache to REGCACHE_NONE as that's the default anyway.
- Change some caches from RBTREE to MAPLE reflecting best practice.
- Use the new gpiod_multi_set_value_cansleep()
- Make sure to grab direct mode for some calibrations paths.
- Avoid using memcmp on structures when checking for matching channel configs.
Instead just match field by field.
dt-bindings:
- Fix up indentation inconsistencies.
gts-helper:
- Simplify building of available scale table.
adi,ad-sigma-delta
- Make sure to disable channel after calibration done.
- Add error handling in configuring channel during calibration.
adi,ad2s1201
- use a bitmap_write() rather than directly accessing underlying storage.
adi,ad3552r-hs
- Fix a wrong error message.
- Make sure to use instruction mode for configuration.
adi,ad4695
- Add a conversion to ensure exit from conversion mode.
- Use custom regmap to handle required sclk rate change.
- Fix an out of bounds array access
- Simplify oversampling ratio handling.
adi,ad4851
- Fix a sign bug.
adi,ad5791
- Fix wrong exported number of storage bits.
adi,ad7124
- Disable all channels at probe to avoid strange initial configurations.
adi,ad7173
- Rework to allow static const struct ad_sigma_delta without need
to make a copy.
adi,ad7623
- Drop a BSD license tag that the authors consider unnecessary.
adi,ad7768-1
- Fix channels sign description exposed to user space.
- Set MOSI idle state to avoid accidental device reset.
- Avoid some overkill locking.
adi,axi-dac
- Check if device interface is busy when enabling data stream.
- Add control of bus mode.
bosch,bmi270
- Move a struct definition to a c file as only used there.
vishay,veml6030
- Enable regmap cache to reduce bus traffic.
- Fix ABI bug around scale reporting.
vishay,vem6075
- Check array bounds to harden against broken hardware.
Various other minor tweaks and fixes not called out.
*
* tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (223 commits)
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
iio: adc: ad7124: Implement system calibration
iio: adc: ad7124: Implement internal calibration at probe time
iio: adc: ad_sigma_delta: Add error checking for ad_sigma_delta_set_channel()
iio: adc: ad4130: Adapt internal names to match official filter_type ABI
iio: adc: ad7173: Fix comparison of channel configs
iio: adc: ad7124: Fix comparison of channel configs
iio: adc: ad4130: Fix comparison of channel setups
...
For several zoned storage devices, vendors will provide extra space
which was used for device level GC than specs and F2FS can use this
space for filesystem level GC. To do that, we can reserve the space
using reserved_blocks. However, it is not enough, since this extra
space should not be shown to users. So, with this new sysfs node,
we can hide the space by substracting reserved_blocks from total
bytes.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
William writes:
Counter updates for 6.15
counter:
- Introduce the COUNTER_EVENT_DIRECTION_CHANGE event
- Introduce the COUNTER_COMP_COMPARE helper macro
microchip-tcb-cpature:
- Add IRQ handling
- Add support for capture extensions
- Add support for compare extension
ti-eqep:
- Add support for reading and detecting changes in direction
tools/counter:
- Add counter_watch_events executable to .gitignore
- Support COUNTER_EVENT_DIRECTION_CHANGE in counter_watch_events tool
* tag 'counter-updates-for-6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Add support for RC Compare
counter: Introduce the compare component
counter: microchip-tcb-capture: Add capture extensions for registers RA/RB
counter: microchip-tcb-capture: Add IRQ handling
counter: ti-eqep: add direction support
tools/counter: add direction change event to watcher
counter: add direction change event
tools/counter: gitignore counter_watch_events
Human presence detection (HPD) sensor uses a camera to determine when
user is physically in front of the machine. This might not be a
desirable behavior because it can (for example) cause the machine to
wake on approach.
Add a new sysfs file "hpd" that will control whether this sensor is
enabled. Use the value of this sysfs file to turn off HPD and prevent
it from re-enabling after resume from suspend.
Cc: Pratap Nirujogi <pratap.nirujogi@amd.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
UAPI Changes:
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/m3gbuh32wgiep43i4zxbyhxqbenvtgvtao5sczivlasj7tikwv@dmlba4bfg2ny
Add the sysfs file to set/get the enablement of the lane. For MCMB
configurations, the field "E_LN" in CMB_CR register is the
individual lane enables. MCMB lane N is enabled for trace
generation when M_CMB_CR.E=1 and M_CMB_CR.E_LN[N]=1. For lanes
that are not implemented on a given MCMB configuration, the
corresponding bits of this field read as 0 and ignore writes.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250226064008.2531037-4-quic_jinlmao@quicinc.com
Update memory repair control interface for memory sparing feature.
CXL memory devices can support soft and hard memory sparing at cacheline,
row, bank and rank granularities. Memory sparing is defined as a repair
function that replaces a portion of memory with a portion of functional
memory at that same granularity.
When a CXL device detects an error in memory, it will report to the host
that there's need for a repair maintenance operation by using an event
record where the "maintenance needed" flag is set.
The event records contain the device physical address (DPA) and other
attributes of the memory to repair such as bank group, bank, rank, row,
column, channel etc.
The kernel will report the corresponding CXL general media or DRAM trace
event to userspace, and userspace tools (e.g. rasdaemon) will initiate
a repair operation in response to the device request via the sysfs
repair control.
[ bp: Massage. ]
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250212143654.1893-15-shiju.jose@huawei.com
Add a generic EDAC memory repair control driver to manage memory repairs in
the system, such as CXL Post Package Repair (PPR) and other soft and hard PPR
features.
For example, a CXL device with DRAM components that support PPR features may
implement PPR maintenance operations. DRAM components may support two types of
PPR:
- hard PPR, for a permanent row repair, and
- soft PPR, for a temporary row repair.
Soft PPR is much faster than hard PPR, but the repair is lost with a power
cycle.
When a CXL device detects an error in a memory, it may report the need for
a repair maintenance operation by using an event record where the "maintenance
needed" flag is set. The event records contain the device physical
address (DPA) and other optional attributes of the memory to repair.
The kernel will report the corresponding CXL general media or DRAM trace event
to userspace, and userspace tools (e.g. rasdaemon) will initiate a repair
operation in response to the device request via the sysfs repair control.
Device with memory repair features registers with EDAC device driver, which
retrieves a memory repair descriptor from EDAC memory repair driver and exposes
the sysfs repair control attributes to userspace in
/sys/bus/edac/devices/<dev-name>/mem_repairX/.
The common memory repair control interface abstracts the control of arbitrary
memory repair functionality into a standardized set of functions. The sysfs
memory repair attribute nodes are only available if the client driver has
implemented the corresponding attribute callback function and provided
operations to the EDAC device driver during registration.
[ bp: Massage, fixup edac_dev_register() retvals, merge
write_overflow fix to mem_repair_create_desc() ]
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250212143654.1893-5-shiju.jose@huawei.com
Add an Error Check Scrub (ECS) control to manage a memory device's ECS
feature.
The ECS is a feature defined in JEDEC DDR5 SDRAM Specification (JESD79-5) and
allows the DRAM to internally read, correct single-bit errors, and write back
corrected data bits to the DRAM array while providing transparency to error
counts.
The DDR5 device contains a number of memory media Field Replaceable Units
(FRU) per device. The DDR5 ECS feature and thus the ECS control driver
supports configuring the ECS parameters per FRU.
Memory devices support the ECS feature register with the EDAC device driver,
which retrieves the ECS descriptor from the EDAC ECS driver. This driver
exposes sysfs ECS control attributes to userspace via
/sys/bus/edac/devices/<dev-name>/ecs_fruX/.
The common sysfs ECS control interface abstracts the control of an arbitrary
ECS functionality to a common set of functions.
Support for the ECS feature is added separately because the control attributes
of the DDR5 ECS feature differ from those of the scrub feature.
The sysfs ECS attribute nodes are only present if the client driver has
implemented the corresponding attribute callback function and passed the
necessary operations to the EDAC RAS feature driver during registration.
[ bp: Massage, fixup edac_dev_register() retvals. ]
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/20250212143654.1893-4-shiju.jose@huawei.com
Add a scrub control to manage memory scrubbers in the system.
Devices with a scrub feature register with the EDAC device driver which
retrieves the scrub descriptor from the scrub driver and exposes the
control attributes for a instance to userspace at
/sys/bus/edac/devices/<dev-name>/scrubX/.
The common sysfs scrub control interface abstracts the control of
arbitrary scrubbing functionality into a common set of functions. The
attribute nodes are only present if the client driver has implemented
the corresponding attribute callback function and passed the operations
to the device driver during registration.
[ bp: Massage commit message, docs and code, simplify text a bit.
Integrate fixup for: https://lore.kernel.org/r/202502251009.0sGkolEJ-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> ]
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Daniel Ferguson <danielf@os.amperecomputing.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/20250212143654.1893-3-shiju.jose@huawei.com
Ziqi Chen <quic_ziqichen@quicinc.com> says:
With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency
plans. However, the gear speed is only toggled between min and max during
clock scaling. Enable multi-level gear scaling by mapping clock frequencies
to gear speeds, so that when devfreq scales clock frequencies we can put
the UFS link at the appropraite gear speeds accordingly.
This series has been tested on below platforms -
sm8550 mtp + UFS3.1
SM8650 MTP + UFS3.1
SM8750 MTP + UFS4.0
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Link: https://lore.kernel.org/r/20250213080008.2984807-1-quic_ziqichen@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1. fadvise(fd1, POSIX_FADV_NOREUSE, {0,3});
2. fadvise(fd2, POSIX_FADV_NOREUSE, {1,2});
3. fadvise(fd3, POSIX_FADV_NOREUSE, {3,1});
4. echo 1024 > /sys/fs/f2fs/tuning/reclaim_caches_kb
This gives a way to reclaim file-backed pages by iterating all f2fs mounts until
reclaiming 1MB page cache ranges, registered by #1, #2, and #3.
5. cat /sys/fs/f2fs/tuning/reclaim_caches_kb
-> gives total number of registered file ranges.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Martin hi,
The UFS4.1 standard, released on January 8, 2025, added a new exception
event: HEALTH_CRITICAL, which notifies the host of a device's critical
health condition. This notification implies that the device is approaching
the end of its lifetime based on the amount of performed program/erase
cycles.
Once an EOL (End-of-Life) exception event is received, we increment a
designated member, which is exposed via a sysfs entry. This new entry, will
report the number of times a critical health event has been reported by a
UFS device.
To handle this new sysfs entry, userspace applications can use select(),
poll(), or epoll() to monitor changes in the critical_health attribute. The
kernel will call sysfs_notify() to signal changes, allowing the userspace
application to detect and respond to these changes efficiently.
The host can gain further insight into the specific issue by reading one of
the following attributes: bPreEOLInfo, bDeviceLifeTimeEstA,
bDeviceLifeTimeEstB, bWriteBoosterBufferLifeTimeEst, and
bRPMBLifeTimeEst. All those are available for reading via the driver's
sysfs entries or through an applicable utility. It is up to userspace to
read these attributes if needed.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250211065813.58091-1-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ad4130 driver exports in_voltageY-voltageZ_filter_mode and
in_voltage-voltage_filter_mode_available attributes to user space. A
previous patch merged the documentation for those attributes with the
documentation for filter_type/filter_type_available into sysfs-bus-iio.
Filter mode and filter type refer to the same feature which is the digital
filter applied over ADC samples. However, since datasheets use the term
`filter type` and ad4130 driver is the only one using filter_mode,
deprecate the filter_mode ABI in favor of filter_type and keep the docs
separate to avoid confusion and intricate attribute descriptions.
Fixes: 01bb12922b ("Documentation: ABI: added filter mode doc in sysfs-bus-iio")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/c77b2d65f1115c1c394582f55944d6f685058f9c.1738680728.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Touch Bars found on x86 Macs support two USB configurations: one
where the device presents itself as a HID keyboard and can display
predefined sets of keys, and one where the operating system has full
control over what is displayed. This commit adds a driver for the
display functionality of the first configuration.
Note that currently only T2 Macs are supported.
This driver is based on previous work done by Ronald Tschalär
<ronald@innovation.ch>.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This adds sysfs attribute /sys/class/chromeos/cros_ec/ap_mode_entry
to expose the status of the AP_MODE_ENTRY feature. This attribute
indicate whether the EC requires direction from the Application
Processor (AP) before entering Type-C alternate modes or USB4 mode.
This allows user-space applications to easily determine if the AP needs
to be involved in mode entry.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Link: https://lore.kernel.org/r/20250203125947.2701106-3-akuchynski@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
