Pull MFD updates from Lee Jones:
"Samsung Exynos ACPM:
- Populate child platform devices from device tree data
- Introduce a new API, 'devm_acpm_get_by_node()', for child devices
to get the ACPM handle
ROHM PMICs:
- Add support for the ROHM BD96802 scalable companion PMIC to the
BD96801 core driver
- Add support for controlling the BD96802 using the BD96801 regulator
driver
- Add support to the BD96805, which is almost identical to the
BD96801
- Add support to the BD96806, which is similar to the BD96802
Maxim MAX77759:
- Add a core driver for the MAX77759 companion PMIC
- Add a GPIO driver for the expander functions on the MAX77759
- Add an NVMEM driver to expose the non-volatile memory on the
MAX77759
STMicroelectronics STM32MP25:
- Add support for the STM32MP25 SoC to the stm32-lptimer
- Add support for the STM32MP25 to the clocksource driver, handling
new register access requirements
- Add support for the STM32MP25 to the PWM driver, enabling up to two
PWM outputs
Broadcom BCM590xx:
- Add support for the BCM59054 PMU
- Parse the PMU ID and revision to support behavioral differences
between chip revisions
- Add regulator support for the BCM59054
Samsung S2MPG10:
- Add support for the S2MPG10 PMIC, which communicates via the
Samsung ACPM firmware instead of I2C
Exynos ACPM:
- Improve timeout detection reliability by using ktime APIs instead
of a loop counter assumption
- Allow PMIC access during late system shutdown by switching to
'udelay()' instead of a sleeping function
- Fix an issue where reading command results longer than 8 bytes
would fail
- Silence non-error '-EPROBE_DEFER' messages during boot to clean up
logs
Exynos LPASS:
- Fix an error handling path by switching to
'devm_regmap_init_mmio()' to prevent resource leaks
- Fix a bug where 'exynos_lpass_disable()' was called twice in the
remove function
- Fix another resource leak in the probe's error path by using
'devm_add_action_or_reset()'
Samsung SEC:
- Handle the s2dos05, which does not have IRQ support, explicitly to
prevent warnings
- Fix the core driver to correctly handle errors from
'sec_irq_init()' instead of ignoring them
STMPE-SPI:
- Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro
MAINTAINERS:
- Adjust a file path for the Siemens IPC LED drivers entry to fix a
broken reference
Maxim Drivers:
- Correct the spelling of "Electronics" in Samsung copyright headers
across multiple files
General:
- Fix wakeup source memory leaks on device unbind for 88pm886,
as3722, max14577, max77541, max77705, max8925, rt5033, and
sprd-sc27xx drivers
Samsung SEC Drivers:
- Split the driver into a transport-agnostic core ('sec-core') and
transport-specific ('sec-i2c', 'sec-acpm') modules to support
non-I2C devices
- Merge the 'sec-core' and 'sec-irq' modules to reduce memory
consumption
- Move internal APIs to a private header to clean up the public API
- Improve code style by sorting includes, cleaning up headers,
sorting device tables, and using helper macros like
'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG'
- Make regmap configuration for s2dos05/s2mpu05 explicit to improve
clarity
- Rework platform data and regmap instantiation to use OF match data
instead of a large switch statement
ROHM BD96801/2:
- Prepare the driver for new models by separating chip-specific data
into its own structure
- Drop IC name prefix from IRQ resource names in both the MFD and
regulator drivers for simplification
Broadcom BCM590xx:
- Refactor the regulator driver to store descriptions in a table to
ease support for new chips
- Rename BCM59056-specific data to prepare for the addition of other
regulators
- Use 'dev_err_probe()' for cleaner error handling
Exynos ACPM:
- Correct kerneldoc warnings and use the conventional 'np' argument
name
General MFD:
- Convert 'aat2870' and 'tps65010' to use the per-client debugfs
directory provided by the I2C core
- Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line
value setter callbacks
- Constify 'regmap_irq_chip' and other structures in '88pm886' to
move data to read-only sections
BCM590xx:
- Drop the unused "id" member from the 'bcm590xx' struct in
preparation for a replacement
Samsung SEC Core:
- Remove forward declarations for functions that no longer exist
SM501:
- Remove the unused 'sm501_find_clock()' function
New Compatibles:
- Google: Add a PMIC child node to the 'google,gs101-acpm-ipc'
binding
- ROHM: Add new bindings for 'rohm,bd96802-regulator' and
'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806
- Maxim: Add new bindings for 'maxim,max77759-gpio',
'maxim,max77759-nvmem', and the top-level 'maxim,max77759'
- STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding
- Broadcom: Add 'bcm59054' compatible
- Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and
'microchip,sama7d65-secumod' compatibles
- Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD
binding
- MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc',
and 'mt8365-infracfg-nao'
- Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic'
syscon compatibles
Refactoring & Cleanup:
- Convert Broadcom BCM59056 devicetree bindings to YAML and split
them into MFD and regulator parts
- Convert the Microchip AT91 secumod binding to YAML
- Drop unrelated consumer nodes from binding examples to reduce bloat
- Correct indentation and style in various DTS examples"
* tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits)
mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers
mfd: maxim: Correct Samsung "Electronics" spelling in headers
mfd: sm501: Remove unused sm501_find_clock
mfd: 88pm886: Constify struct regmap_irq_chip and some other structures
dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao
mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind
mfd: rt5033: Fix wakeup source leaks on device unbind
mfd: max8925: Fix wakeup source leaks on device unbind
mfd: max77705: Fix wakeup source leaks on device unbind
mfd: max77541: Fix wakeup source leaks on device unbind
mfd: max14577: Fix wakeup source leaks on device unbind
mfd: as3722: Fix wakeup source leaks on device unbind
mfd: 88pm886: Fix wakeup source leaks on device unbind
dt-bindings: mfd: Correct indentation and style in DTS example
dt-bindings: mfd: Drop unrelated nodes from DTS example
dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic
dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
dt-bindings: mfd: syscon: Add mt7988-topmisc
mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe()
...
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding. While re-indenting, drop
unused labels.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501145125.59952-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Samsung S2MPG10 PMIC is similar to the existing PMICs supported by
this binding.
It is a Power Management IC for mobile applications with buck
converters, various LDOs, power meters, RTC, clock outputs, and
additional GPIOs interfaces.
Unlike other Samsung PMICs, communication is not via I2C, but via the
Samsung ACPM firmware, it therefore doesn't need a 'reg' property but
needs to be a child of the ACPM firmware node instead.
S2MPG10 can also act as a system power controller allowing
implementation of a true cold-reset of the system.
Support for the other components like regulators and power meters will
be added in subsequent future patches.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-1-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Convert devicetree bindings for the Broadcom BCM59056 PMU MFD from
TXT to YAML format. This patch does not change any functionality;
the bindings remain the same.
The bindings have been split into two parts: the MFD binding and
a separate binding for the regulator node, to simplify the addition
of other models later (which have different regulators).
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-1-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add a new stm32mp25 compatible to stm32-lptimer dt-bindings, to support
STM32MP25 SoC. Some features has been updated or added to the low-power
timer:
- new capture compare channels
- up to two PWM channels
- PWM input capture
- peripheral interconnect in stm32mp25 has been updated (new triggers).
- registers/bits has been added or revisited (IER access).
So introduce a new compatible to handle this diversity.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250429125133.1574167-2-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
Add a new stm32mp25 compatible to stm32-timer dt-bindings in order to
support the STM32MP25 SoC. Some features has been added or updated in
the stm32-timer timer such as:
- hardware configuration and identification registers to read the timer
version and capabilities (counter width, number of channels...)
- dithering mode (can be used to extend PWM resolution)
- input triggers list
- new counter modes
- various bit-field updates
- power-domains property
Timer trigger identifier can be up to 19 (from timer 20)
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-2-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
