Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
It’s better to avoid long sleeps right from the beginning of the polling
since the data may be available much sooner than the sleep period.
Because polling host memory is inexpensive, this change gradually
increases the sleep time up to the user-requested period.
Signed-off-by: Didi Freiman <dfreiman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The device heartbeat work is currently initialized at
device_heartbeat_schedule() which is called at the end of
hl_device_init().
However hl_device_init() can fail at a previous step, and in such a
case, a subsequent call to hl_device_fini() will lead to calling
cleanup_resources() and accessing this work uninitialized.
As there is no real need to re-initialize this work every time it is
rescheduled, move this initialization to device_early_init() to be done
once and early enough.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The test packet which is sent to FW for the PQ heartbeat is used also as
the trigger in FW to send the EQ heartbeat event.
Add the time of the last sent packet to the debug info which is printed
upon a EQ heartbeat failure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Add a dump of the EQ entries headers upon a EQ heartbeat failure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Don't print the "previous EQ index" value in case of a EQ heartbeat
failure, because it is incremented along with the EQ CI and therefore
redundant.
In addition, as the CPU-CP PI is zeroed when it reaches a value that is
twice the queue size, add a value of the CI with a similar wrap around,
to make it easier to compare the values.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
In order to have better debuggability upon encountering FW issues,
We are adding additional info once CPU packet timeout expires.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
When device release triggers a hard reset, there is a printout of
the cause. Currently listed causes (that increment context refcount)
are active command submissions and exported DMA buffer objects. In
any other case, the printout emits "unknown reason". We identify and
print another reason - allocated command buffers.
Signed-off-by: Ilia Levi <illevi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
When sending disable pci msg towards firmware, there is a
possibility that an EQ packet is already pending,
disabling EQ interrupt will prevent this from happening.
The interrupt will be re-enabled after reset.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Currently we schedule the heartbeat thread at late init, only then
we set the INTS_REGISTER packet which enables events to be received
from firmware.
Init may take some time and we want to give firmware 2 full cycles of
heartbeat thread after it received INTS_REGISTER.
The patch will move the heartbeat thread scheduling to be after driver
is done with all initializations.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
There are several timestamp registration debug prints which
spams the kernel log whenever dyn debug is enabled.
Remove those prints.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Add cpld_timestamp field to cpucp_info structure and return cpld
timestamp as part of cpld version
Signed-off-by: Vitaly Margolin <vmargolin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
As the new dynamic EQ includes clock change events which are common and
not ASIC-specific, add a common handler for these events.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Gaudi2 with PCI revision ID with the value of '4' represents Gaudi2D
device and should be detected and initialized as Gaudi2.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
hl_eq_heartbeat_event_handle() doesn't have ASIC specific code, and
therefore can be moved from Gaudi2-only code to common code, and
possibly used for other ASICs.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Future supported ASICs might use the dynamic EQ mechanism with the
firmware, and in that case the EQ size won't be equal to the default
HL_EQ_SIZE_IN_BYTES value.
Add an ASIC property to enable overriding this value.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Driver should check and report any fatal errors detected by preboot,
before it attempts to load the boot fit.
Some errors may cause the driver to stop the boot process and mark
the device as unusable.
This check will allow the driver to fail and print the error reported
by preboot and skip the time wasting attempt of trying to load the
boot fit, which will fail due to the error.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Struct comms_desc_header is deprecated and replaced by struct
comms_msg_header. As a preparation for removing comms_desc_header
from FW, all it's usage in code is replaced by comms_msg_header.
Signed-off-by: Igal Zeltser <izeltser@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
It is hard to debug the reason for heartbeat check failures.
As an attempt to ease this task, this patch will provide more
information when this failure happens.
Heartbeat checks the communication with FW, so printing
the CPU queue pi/ci and the counter of how many times that event
was received would help in debugging the issue.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
This addition helps log parsers better define the error without the need
to go back and search the device name on former log lines.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Exposing server type through debugfs to enable easier access via
scripts.
Signed-off-by: Tal Risin <trisin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Trace events might still be recorded after the accel device is released,
while the device name is no longer available.
Modify the trace functions to use the parent device instead, which is
available at that point and still informative as the device name.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
If we detected heartbet event while some daemon in the background send
(via driver interface) CPUCP messages the dmesg will be flooded.
Instead, a slight refactor in hl_fw_send_cpu_message() returns -EAGAIN
when CPU is disabled (i.e. heartbeat failure) and only then.
Later, all calling functions that may be invoked by user space can issue
prints only if the error code is not -EAGAIN.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The function returned an error code which isn't propagated up the stack
(nor is it printed).
The return value is only checked for =0 or !=0 which implies bool return
value.
The function signature is updated accordingly, renamed, and slightly
refactored.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Currently, the code contains 2 types of FW version comparison functions:
- hl_is_fw_sw_ver_[below/equal_or_greater]()
- gaudi2 specific function of the type
gaudi2_is_fw_ver_[below/above]x_y_z()
Moreover, some functions use the inner FW version which shuold be only
stage during development but not version dependencies.
Finally, some tests are done to deprecated FW version to which LKD
should hold no compatibility.
This commit aligns all APIs to a single function that just compares the
version and return an integers indicator (similar in some way to
strcmp()).
In addition, this generic function now considers also the sub-minor FW
version and also remove dead code resulting in deprecated FW versions
compatibility.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Today we read PCI VENDOR-ID in order to make sure PCI link is
healthy. Apparently the VENDOR-ID might be stored on host and
hence, when we read it we might not access the PCI bus.
In order to make sure PCI health check is reliable, we will start
checking the DEVICE-ID instead.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The reserved memory for FW is currently saved in an ASIC property in
units of MB, just like the value that comes from FW.
Except the fact that it is not clear from the property's name, it means
also that a calculation to actual size is required everywhere that it is
used.
Modify the property to hold the size in bytes.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the reserved memory request from FW is handled when running
with preboot only, but this request is relevant also when running with
full FW.
Modify to always handle this reservation request.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fetching sensor data can fail due to various reasons. In order
not to pollute the kernel log, those error prints must be
rate limited.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The glbl error cause handling has a wrong assumption that all error
bits are consecutive.
Fix the handling to check all relevant error bits per ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Skip loading a linux FW image into the device with the current supported
ASICs is done for test purposes only.
Moreover, for future supported ASICs it is possible that there won't be
a need to load such an image.
The print in such a case is therefore not needed in most cases, so
replace the used dev_info() with dev_dbg().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The hop size related properties is a MMU properties and not
asic properties.
As for PMMU and HMMU we could have different sizes.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In newer kernel versions, irq_set_affinity_hint() is deprecated.
Instead, use the newer version which is irq_set_affinity_and_hint().
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The coding style in the Linux kernel prefers not to use
braces for single-statement if conditions.
This patch removes the unnecessary braces from an if statement
in the file drivers/accel/habanalabs/common/command_submission.c,
which also resolves a coding style warning.
Signed-off-by: Malkoot Khan <engr.mkhan1990@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the HMMU page tables reside in the host memory,
which will cause host access from the device for every page walk.
This can affect PCIe bandwidth in certain scenarios.
To prevent that problem, HMMU page tables will be moved to the device
memory so the miss transaction will read the hops from there instead of
going to the host.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The mechanism of aborting device reset for consecutive fatal errors is
currently only for fatal errors that are reported by FW.
A non-responsive FW and consecutive heartbeat failures is also
considered fatal, so add them as well to this mechanism to avoid
recurring device reset in such a case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
