Really the only purpose of this was to limit the address space size to
4GB to avoid 32b rollover problems in 64b pointer math in older sqe fw.
So replace the address_space_size with a quirk limiting the address
space to 4GB. In all other cases, use the SMMU input address size (IAS)
to determine the address space size.
v2: Properly account for vm_start
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/649467/
If the GMU takes too long to respond to an HFI message, we may return
early. If the GMU does eventually respond, and then we send a second
message, we will see the response for the first, throw another error,
and keep going. But we don't currently wait for the interrupt from the
GMU again, so if the second response isn't there immediately we may
prematurely return. This can cause a continuous cycle of missed HFI
messages, and for reasons I don't quite understand the GMU does not shut
down properly when this happens.
Fix this by waiting for the GMU interrupt when we see an empty queue. If
the GMU never responds then the queue really is empty and we quit. We
can't wait for the interrupt when we see a wrong response seqnum because
the GMU might have already queued both responses by the time we clear
the interrupt the first time so we do need to check the queue before
waiting on the interrupt again.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650013/
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is a small chance that the GPU is already hot during boot. In that
case, the call to of_devfreq_cooling_register() will immediately try to
apply devfreq cooling, as seen in the following crash:
Unable to handle kernel paging request at virtual address 0000000000014110
pc : a6xx_gpu_busy+0x1c/0x58 [msm]
lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm]
Call trace:
a6xx_gpu_busy+0x1c/0x58 [msm] (P)
devfreq_simple_ondemand_func+0x3c/0x150
devfreq_update_target+0x44/0xd8
qos_max_notifier_call+0x30/0x84
blocking_notifier_call_chain+0x6c/0xa0
pm_qos_update_target+0xd0/0x110
freq_qos_apply+0x3c/0x74
apply_constraint+0x88/0x148
__dev_pm_qos_update_request+0x7c/0xcc
dev_pm_qos_update_request+0x38/0x5c
devfreq_cooling_set_cur_state+0x98/0xf0
__thermal_cdev_update+0x64/0xb4
thermal_cdev_update+0x4c/0x58
step_wise_manage+0x1f0/0x318
__thermal_zone_device_update+0x278/0x424
__thermal_cooling_device_register+0x2bc/0x308
thermal_of_cooling_device_register+0x10/0x1c
of_devfreq_cooling_register_power+0x240/0x2bc
of_devfreq_cooling_register+0x14/0x20
msm_devfreq_init+0xc4/0x1a0 [msm]
msm_gpu_init+0x304/0x574 [msm]
adreno_gpu_init+0x1c4/0x2e0 [msm]
a6xx_gpu_init+0x5c8/0x9c8 [msm]
adreno_bind+0x2a8/0x33c [msm]
...
At this point we haven't initialized the GMU at all yet, so we cannot read
the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before
in commit 6694482a70 ("drm/msm: Avoid unclocked GMU register access in
6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but
unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag
accordingly. This means the df->suspended flag does not match the actual
devfreq state after initialization and msm_devfreq_get_dev_status() will
end up accessing GMU registers, causing the crash.
Fix this by setting df->suspended correctly during initialization.
Cc: stable@vger.kernel.org
Fixes: 6694482a70 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650772/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF.
Without the polarity configuration in GRF, it can be observed
from the HDMI protocol analyzer that the H/V front/back timing
output by RK3036 HDMI are currently not in line with the specifications.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-5-andyshrk@163.com
When a CL/CSD job times out, we check if the GPU has made any progress
since the last timeout. If so, instead of resetting the hardware, we skip
the reset and let the timer get rearmed. This gives long-running jobs a
chance to complete.
However, when `timedout_job()` is called, the job in question is removed
from the pending list, which means it won't be automatically freed through
`free_job()`. Consequently, when we skip the reset and keep the job
running, the job won't be freed when it finally completes.
This situation leads to a memory leak, as exposed in [1] and [2].
Similarly to commit 704d3d60fe ("drm/etnaviv: don't block scheduler when
GPU is still active"), this patch ensures the job is put back on the
pending list when extending the timeout.
Cc: stable@vger.kernel.org # 6.0
Reported-by: Daivik Bhatia <dtgs1208@gmail.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12227 [1]
Closes: https://github.com/raspberrypi/linux/issues/6817 [2]
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250430210643.57924-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The gsc_hdcp_ops is duplicated and initialized exactly the same way in
two different places (for i915 and xe), and requires forward
declarations for all the hooks. Deduplicate, and make the functions
static.
There are slight differences in the i915 and xe implementations of
intel_hdcp_gsc_init() and intel_hdcp_gsc_fini(). Take the best of both,
and improve.
We need to expose intel_hdcp_gsc_hdcp2_init() and
intel_hdcp_gsc_free_message() for this, and create the latter for xe.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/21e7871b35d4c7d13f016b5ecb4f10e5be72c531.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We haven't updated the DRIVER_TIMESTAMP since commit 3570bd989a
("drm/i915: Update DRIVER_DATE to 20230929") 1½ years ago. Before then,
the previous update was commit 139caf7ca2 ("drm/i915: Update
DRIVER_DATE to 20201103") 4+ years ago. The DRIVER_DATE has also been
removed altogether.
We've used the DRIVER_TIMESTAMP to log suggestions to file bugs on GPU
hangs when they happen on a driver less than six months old. Combined
with the sporadic DRIVER_TIMESTAMP updates, we really haven't logged the
suggestions for years.
Just stop logging the suggestion to file bugs altogether, and remove
DRIVER_TIMESTAMP. This doesn't really change anything wrt to logging GPU
errors or how we handle bugs. And effectively we already stopped logging
the message a year ago when we stopped updating DRIVER_TIMESTAMP.
Instead, add an unconditional message about the GPU error state
location.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250429115055.2133143-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v6.16-rc1:
UAPI Changes:
- panthor now fails in mmap_offset call for a BO created with
DRM_PANTHOR_BO_NO_MMAP.
- Add DRM_PANTHOR_BO_SET_LABEL ioctl and label panthor kernel BOs.
Cross-subsystem Changes:
- Add kmap_local_page_try_from_panic for drm/panic.
- Add DT bindings for panels.
- Update DT bindings for imagination.
- Extend %p4cc in lib/vsprintf.c to support fourcc printing.
Core Changes:
- Remove the disgusting turds.
- Register definition updates for DP.
- DisplayID timing blocks refactor.
- Remove now unused mipi_dsi_dsc_write_seq.
- Convert panel drivers to not return error in prepare/enable and
unprepare/disable calls.
Driver Changes:
- Assorted small fixes and featuers for rockchip, panthor, accel/ivpu,
accel/amdxdna, hisilicon/hibmc, i915/backlight, sysfb, accel/qaic,
udl, etnaviv, virtio, xlnx, panel/boe-bf060y8m-aj0, bridge/synopsis,
panthor, panel/samsung/sofef00m, lontium/lt9611uxc, nouveau, panel/himax-hx8279,
panfrost, st7571-i2c.
- Improve hibmc interrupt handling and add HPD support.
- Add NLT NL13676BC25-03F, Tianma TM070JDHG34-00, Himax HX8279/HX8279-D
DDIC, Visionox G2647FB105, Sitronix ST7571 LCD Controller, panels.
- Add zpos, alpha and blend to renesas.
- Convert drivers to use drm_gem_is_imported, replacing gem->import_attach.
- Support TI AM68 GPU in imagination.
- Support panic handler in virtio.
- Add support to get the panel from DP AUX bus in rockchip and add
RK3588 support.
- Make sofef00 only support the sofef00 panel, not another unrelated
one.
- Add debugfs BO dumping support to panthor, and print associated labels.
- Implement heartbeat based hangcheck in ivpu.
- Mass convert drivers to devm_drm_bridge_alloc api.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e2a958d9-e506-4962-8bae-0dbf2ecc000f@linux.intel.com
