The newly added driver calls drm_client_setup(), but that is not
always built in:
x86_64-linux-ld: vmlinux.o: in function `st7571_probe':
st7571-i2c.c:(.text+0x7b7119): undefined reference to `drm_client_setup'
Select the appropriate Kconfig symbol.
Fixes: 4b35f0f41e ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250428150752.3970145-1-arnd@kernel.org
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
This is the new API for allocating DRM bridges.
These two drivers are tangled together by the ldb_add_bridge_helper(), so
they are converted at once.
They also have a similar design, each embedding an array of channels in
their main struct, and each channel embeds a drm_bridge. This prevents
dynamic, refcount-based deallocation of the bridges.
To make the new, dynamic bridge allocation possible:
* change the array of channels into an array of channel pointers
* allocate each channel using devm_drm_bridge_alloc()
* adapt ldb_add_bridge_helper() to not set the funcs pointer
(now done by devm_drm_bridge_alloc())
* adapt the code wherever using the channels
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250424-drm-bridge-convert-to-alloc-api-v2-31-8f91a404d86b@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Using "depends on" and "select" for the same Kconfig symbol is known to
cause circular dependencies (cmp. "Kconfig recursive dependency
limitations" in Documentation/kbuild/kconfig-language.rst.
DRM drivers are selecting drm helpers so do the same for
DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Fixes following circular dependency reported on x86 for the downstream
Asahi Linux tree:
error: recursive dependency detected!
symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER
symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER
symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI
symbol DRM_ASAHI depends on RUST
symbol RUST depends on CALL_PADDING
symbol CALL_PADDING depends on OBJTOOL
symbol OBJTOOL is selected by STACK_VALIDATION
symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER
symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224
symbol <choice> unknown is visible depending on UNWINDER_GUESS
symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT
symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS
symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER
Fixes: 12a280c728 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: stable@vger.kernel.org
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250304-drm_debug_dp_mst_topo_kconfig-v1-1-e16fd152f258@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Calling drm_crtc_vblank_on() drm_crtc_helper_funcs' atomic_enable is
expected to enable vblank interrupts. It may have been avoided here to
due to drm_crtc_vblank_get()'s error behavior after
drm_crtc_vblank_reset(). With that fixed in the preceding change the
driver can call drm_crtc_vblank_on() from adp_crtc_atomic_enable().
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250428-drm_adp_fixes-v2-3-912e081e55d8@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
drm_crtc_vblank_get() may fail when it's called before
drm_crtc_vblank_on() on a resetted CRTC. This occurs in
drm_crtc_helper_funcs' atomic_flush() calls after
drm_atomic_helper_crtc_reset() for example directly after probe. Send
the vblank event directly in such cases. Avoids following warning in
the subsequent drm_crtc_vblank_put() call from the vblank irq handler as
below:
adp 228200000.display-pipe: [drm] drm_WARN_ON(atomic_read(&vblank->refcount) == 0)
WARNING: CPU: 5 PID: 1206 at drivers/gpu/drm/drm_vblank.c:1247 drm_vblank_put+0x158/0x170
...
Call trace:
drm_vblank_put+0x158/0x170 (P)
drm_crtc_vblank_put+0x24/0x38
adp_fe_irq+0xd8/0xe8 [adpdrm]
__handle_irq_event_percpu+0x94/0x318
handle_irq_event+0x54/0xd0
handle_fasteoi_irq+0xa8/0x240
handle_irq_desc+0x3c/0x68
generic_handle_domain_irq+0x24/0x40
Modifying `crtc->state->event` here is fine as crtc->mutex is locked by
the non-async atomic commit. In retrospect this looks so obvious that it
doesn't warrant a comment in the file.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250428-drm_adp_fixes-v2-2-912e081e55d8@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
To deterministically capture the transition of the state machine going from
SRDOFFACK to IDLE, the delayed V. Blank should be at least one line after
the non-delayed V. Blank.
Ensure this by adding new interface into intel_psr to query number of lines
needed for vblank delay and call it from intel_crtc_vblank_delay.
v3: use existing intel_crtc_vblank_delay mechanism
v2: apply limits only when needed (VRR TG vs. Legacy TG)
Bspec: 69897
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250423102704.1368310-1-jouni.hogander@intel.com
In the case of MMU errors caused by the TFU unit, the
client that causes the MMU error is expected to be reported.
But in the case of MMU TFU errors, a non existing client was
being reported. This happened because the client calculation
was taking into account more than the bits 0-7 from the
axi_id that were representing the client.
[ 27.845132] v3d fec00000.v3d: MMU error from client ? (13) at 0x3bb1000, pte invalid
Masking the bits and using the correct axi_id ranges fixes the
calculation to report the real guilty client on V3D 4.1 and 4.2.
Make the MMU error print axi_id with hexadecimal as used in the
ranges.
Fixes: 38c2c7917a ("drm/v3d: Fix and extend MMU error handling.")
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250425122522.18425-1-jmcasanova@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Allow additional output formats in both DPI and DP_INTF blocks of
the MT8195 and MT8188 SoCs (as the latter is fully compatible with,
hence reuses, the former's platform data for both blocks) by adding:
1. New formats to the `mt8195_output_fmts` array for dp_intf,
lacking YUV422 12-bits support, and adding RGB888 2X12_LE/BE
(8-bits), BGR888 (8-bits) RGB101010 1x30 (10-bits), and YUV
formats, including YUV422 8/10 bits, and YUV444 8/10 bits; and
2. A new `mt8195_dpi_output_fmts` array for DPI only, with all of
for formats added to dp_intf and with the addition of the
YUYV12_1X24 (YUV422 12-bits) output format.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250409131306.108635-5-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu, with some exynos cleanups and a
couple of minor fixes, seems a bit quiet, but probably some lag from
Easter holidays.
amdgpu:
- P2P DMA fixes
- Display reset fixes
- DCN 3.5 fixes
- ACPI EDID fix
- LTTPR fix
- mode_valid() fix
exynos:
- fix spelling error
- remove redundant error handling in exynos_drm_vidi.c module
- marks struct decon_data as const in the exynos7_drm_decon driver
since it is only read
- Remove unnecessary checking in exynos_drm_drv.c module
meson:
- Fix VCLK calculation
panel:
- jd9365a: Fix reset polarity"
* tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernel:
drm/exynos: Fix spelling mistake "enqueu" -> "enqueue"
drm/exynos: exynos7_drm_decon: Consstify struct decon_data
drm/exynos: fixed a spelling error
drm/exynos/vidi: Remove redundant error handling in vidi_get_modes()
drm/exynos: Remove unnecessary checking
drm/amd/display: do not copy invalid CRTC timing info
drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF
drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinks
drm/amd/display: Fix ACPI edid parsing on some Lenovo systems
drm/amdgpu: Allow P2P access through XGMI
drm/amd/display: Enable urgent latency adjustment on DCN35
drm/amd/display: Force full update in gpu reset
drm/amd/display: Fix gpu reset in multidisplay config
drm/amdgpu: Don't pin VRAM without DMABUF_MOVE_NOTIFY
drm/amdgpu: Use allowed_domains for pinning dmabufs
drm: panel: jd9365da: fix reset signal polarity in unprepare
drm/meson: use unsigned long long / Hz for frequency types
Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates"
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
Fixes: 760edec939 ("drm/xe/eustall: Add support to read() and poll() EU stall data")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4598
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/c896932fca84f79db2df5942911997ed77b2b9b6.1744934656.git.harish.chegondi@intel.com
Core Changes:
Fix drm_gpusvm kernel-doc (Lucas)
Driver Changes:
- Release guc ids before cancelling work (Tejas)
- Remove a duplicated pc_start_call (Rodrigo)
- Fix an incorrect assert in previous userptr fixes (Thomas)
- Remove gen11 assertions and prefixes (Lucas)
- Drop sentinels from arg to xe_rtp_process_to_src (Lucas)
- Temporarily disable D3Cold on BMG (Rodrigo)
- Fix MOCS debugfs LNCF readout (Tvrtko)
- Some ring flush cleanups (Tvrtko)
- Use unsigned int for alignment in fb pinning code (Tvrtko)
- Retry and wait longer for GuC PC start (Rodrigo)
- Recognize 3DSTATE_COARSE_PIXEL in LRC dumps (Matt Roper)
- Remove reduntant check in xe_vm_create_ioctl() (Xin)
- A bunch of SRIOV updates (Michal)
- Add stats for SVM page-faults (Francois)
- Fix an UAF (Harish)
- Expose fan speed (Raag)
- Fix exporting xe buffer objects multiple times (Tomasz)
- Apply a workaround (Vinay)
- Simplify pinned bo iteration (Thomas)
- Remove an incorrect "static" keywork (Lucas)
- Add support for separate firmware files on each GT (Lucas)
- Survivability handling fixes (Lucas)
- Allow to inject error in early probe (Lucas)
- Fix unmet direct dependencies warning (Yue Haibing)
- More error injection during probe (Francois)
- Coding style fix (Maarten)
- Additional stats support (Riana)
- Add fault injection for xe_oa_alloc_regs (Nakshrtra)
- Add a BMG PCI ID (Matt Roper)
- Some SVM fixes and preliminary SVM multi-device work (Thomas)
- Switch the migrate code from drm managed to dev managed (Aradhya)
- Fix an out-of-bounds shift when invalidating TLB (Thomas)
- Ensure fixed_slice_mode gets set after ccs_mode change (Niranjana)
- Use local fence in error path of xe_migrate_clear (Matthew Brost)
- More Workarounds (Julia)
- Define sysfs_ops on all directories (Tejas)
- Set power state to D3Cold during s2idle/s3 (Badal)
- Devcoredump output fix (John)
- Avoid plain 64-bit division (Arnd Bergmann)
- Reword a debug message (John)
- Don't print a hwconfig error message when forcing execlists (Stuart)
- Restore an error code to avoid a smatch warning (Rodrigo)
- Invalidate L3 read-only cachelines for geometry streams too (Kenneth)
- Make PPHWSP size explicit in xe_gt_lrc_size() (Gustavo)
- Add GT frequency events (Vinay)
- Fix xe_pt_stage_bind_walk kerneldoc (Thomas)
- Add a workaround (Aradhya)
- Rework pinned save/restore (Matthew Auld, Matthew Brost)
- Allow non-contig VRAM kernel BO (Matthew Auld)
- Support non-contig VRAM provisioning for SRIOV (Matthew Auld)
- Allow scratch-pages for unmapped parts of page-faulting VMs. (Oak)
- Ensure XE_BO_FLAG_CPU_ADDR_MIRROR had a unique value (Matt Roper)
- Fix taking an invalid lock on wedge (Lucas)
- Configs and documentation for survivability mode (Riana)
- Remove an unused macro (Shuicheng)
- Work around a page-fault full error (Matt Brost)
- Enable a SRIOV workaround (John)
- Bump the recommended GuC version (John)
- Allow to drop VRAM resizing (Lucas)
- Don't expose privileged debugfs files if VF (Michal)
- Don't show GGTT/LMEM debugfs files under media GT (Michal)
- Adjust ring-buffer emission for maximum possible size (Tvrtko)
- Fix notifier vs folio lock deadlock (Matthew Auld)
- Stop relying on placement for dma-buf unmap Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aADWaEFKVmxSnDLo@fedora
Currently we disable the VGA plane from various places, sometimes
multiple times in the same init/resume sequence. Get rid of all this
mess and do it just once. The most correct place seems to be just
after intel_early_display_was() as that one applies various workarounds
that need to be in place before we touch any planes (including the
VGA plane).
Actually, we do still have a second caller in
vlv_display_power_well_init(). I think we still need that as the reset
value of VGACNTR is 0x0 and thus technically the VGA plane will be
(at least partially) enabled after the power well has been toggled.
In both cases we have the necessary power reference already held
(INIT power domain for load/resume case, and the display power well
itself being what we need for vlv_display_power_well_init()).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
