Clang warns (or errors with CONFIG_WERROR=y):
drivers/gpu/drm/sysfb/efidrm.c:353:11: error: variable 'screen_base' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
353 | else if (mem_flags & EFI_MEMORY_WB)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sysfb/efidrm.c:356:7: note: uninitialized use occurs here
356 | if (!screen_base)
| ^~~~~~~~~~~
drivers/gpu/drm/sysfb/efidrm.c:353:7: note: remove the 'if' if its condition is always true
353 | else if (mem_flags & EFI_MEMORY_WB)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
354 | screen_base = devm_memremap(&pdev->dev, mem->start, resource_size(mem),
drivers/gpu/drm/sysfb/efidrm.c:261:27: note: initialize the variable 'screen_base' to silence this warning
261 | void __iomem *screen_base;
| ^
| = NULL
efidrm_get_mem_flags() can only return a mask that has at least one of
the tested values set so the else case is impossible but clang's static
analysis runs before inlining so it cannot know that.
Initialize screen_base to NULL and add a defensive error message in case
mem_flags were ever returned without one of the four valid values.
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250410-efidrm-avoid-uninit-screen_info-warning-v2-1-b79646f58c24@kernel.org
This dp controller need features of digital-to-analog conversion and
high-speed transmission in chip by its extern serdes controller. Our
serdes cfg is relatively simple, just need two register configurations.
Don't need too much functions, like: power on/off, initialize, and some
complex configurations, so I'm not going to use the phy framework.
This serdes is inited and configured in dp initialization, and also
integrating them into link training process.
For rate changing, we can change from 1.62-8.2Gpbs by cfg reg.
For voltage and pre-emphasis levels changing, we can cfg different
serdes ffe value.
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250331074212.3370287-3-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
We don't have to drmm_kmalloc() local copy of debugfs_list to
write there our pointer to the struct xe_guc as we can extract
pointer to the struct xe_gt from the grandparent debugfs entry,
in similar way to what we did for GT debugfs files.
Note that there is no change in file/directory structure, just
refactored how files are created and how functions are called.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250403142635.1821-2-michal.wajdeczko@intel.com
Driver Changes:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/unq5j26aejbrjz5nuvmdtcgupyix5bacpoahod4bdohlvwrney@kekimsi5ossx
This commit is a resubmission of commit 1fe1c66274 ("drm/v3d: Fix
Indirect Dispatch configuration for V3D 7.1.6 and later"), which was
accidentally reverted by commit 91dae758bd ("Merge tag
'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel
into drm-next"), likely due to an unfortunate conflict resolution.
From the original commit message:
```
`args->cfg[4]` is configured in Indirect Dispatch using the number of
batches. Currently, for all V3D tech versions, `args->cfg[4]` equals the
number of batches subtracted by 1. But, for V3D 7.1.6 and later, we must not
subtract 1 from the number of batches.
Implement the fix by checking the V3D tech version and revision.
Fixes several `dEQP-VK.synchronization*` CTS tests related to Indirect Dispatch.
```
Fixes: 91dae758bd ("Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250409205051.9639-1-mcanal@igalia.com
MMU handler needs to be in control of the job interrupt clears because
clearing the interrupt also unblocks the writer/reader that triggered
the fault, and we don't want it to be unblocked until we've had a chance
to process the IRQ.
Since clearing the clearing is just one line, let's make it explicit
instead of doing it in the generic code path.
Note that this commit changes the existing behavior in that the MMU
COMPLETED irqs are no longer cleared, which is fine because they are
masked, so we're not risking an interrupt flood.
Changes in v3:
- Mention the fact we no longer clear MMU COMPLETED irqs
- Add Liviu's R-b
Changes in v2:
- Move the MMU_INT_CLEAR around
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250404080933.2912674-5-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
When the device is coherent, panthor_gpu_coherency_init() will read
GPU_COHERENCY_FEATURES to make sure the GPU supports the ACE-Lite
coherency protocol, which will fail if the clocks/power-domains are
not enabled when the read is done. Move the
panthor_gpu_coherency_init() call after the device has been resumed
to prevent that.
Changes in v2:
- Add Liviu's R-b
Changes in v3:
- Add Steve's R-b
Fixes: dd7db8d911 ("drm/panthor: Explicitly set the coherency mode")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250404080933.2912674-3-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Because the layer/window enable/disable is take effect by vsync, if the
overlay configuration of these layers does not follow vsync and
takes effect immediately instead, when multiple layers are dynamically
enable/disable, inconsistent display contents may be seen on the screen.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250318062024.4555-1-andyshrk@163.com
amd-drm-fixes-6.15-2025-04-09:
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250409165238.1180153-1-alexander.deucher@amd.com
Don't fetch it again if we already have it. It seems the
registers don't reliably have the value at resume in some
cases.
Fixes: 785f0f9fe7 ("drm/amdgpu: Add mes v12_0 ip block support (v4)")
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e7b08d239)
Cc: stable@vger.kernel.org # 6.12.x
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1e866f1fe5 ("drm/amd/pm: Prevent divide by zero")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da7dc714a8)
Cc: stable@vger.kernel.org
This is normally handled in the gfx IP suspend callbacks, but
for S0ix, those are skipped because we don't want to touch
gfx. So handle it in device suspend.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Fixes: 963537ca23 ("drm/amdgpu: add dynamic workload profile switching for gfx11")
Fixes: 5f95a15495 ("drm/amdgpu: add dynamic workload profile switching for gfx12")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 906ad45167)
Cc: stable@vger.kernel.org
