Some power domains require extra voltages to be applied. For example
trying to enable the GPU power domain on RK3588 fails when the SoC
does not have VDD GPU enabled. The same is expected to happen for
the NPU, which also has a dedicated supply line.
We get the regulator using devm_of_regulator_get(), so a missing
dependency in the devicetree is handled gracefully by printing a warning
and creating a dummy regulator. This is necessary, since existing DTs do
not have the regulator described. They might still work if the regulator
is marked as always-on. It is also working if the regulator is enabled
at boot time and the GPU driver is probed before the kernel disables
unused regulators.
The regulator itself is not acquired at driver probe time, since that
creates an unsolvable circular dependency. The power domain driver must
be probed early, since SoC peripherals need it. Regulators on the other
hand depend on SoC peripherals like SPI, I2C or GPIO. MediaTek does not
run into this, since they have two power domain drivers.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250220-rk3588-gpu-pwr-domain-regulator-v6-7-a4f9c24e5b81@kernel.org
[Ulf: Fixed conflict when applying]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The calls rockchip_pd_power makes to rockchip_pmu_set_idle_request lack
any return error handling, causing device drivers to incorrectly believe
the hardware idle requests succeed when they may have failed. This leads
to software possibly accessing hardware that is powered off and the
subsequent SError panic that follows.
Add error checking and return errors to the calling function to prevent
such crashes.
gst-launch-1.0 videotestsrc num-buffers=2000 ! v4l2jpegenc ! fakesink
Setting pipeline to PAUSED ...er-x64
Pipeline is PREROLLING ...
Redistribute latency...
rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'hevc', val=0x98260
SError Interrupt on CPU2, code 0x00000000bf000002 -- SError
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20241214215802.23989-1-pgwipeout@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250220-rk3588-gpu-pwr-domain-regulator-v6-5-a4f9c24e5b81@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To resolve the build error with undefined reference to
`arm_smccc_1_1_get_conduit', let's add a build dependency to
HAVE_ARM_SMCCC_DISCOVERY.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 61eeb96787 ("pmdomain: rockchip: Check if SMC could be handled by TA")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It has been pointed out that naming a subsystem "genpd" isn't very
self-explanatory and the acronym itself that means Generic PM Domain, is
known only by a limited group of people.
In a way to improve the situation, let's rename the subsystem to pmdomain,
which ideally should indicate that this is about so called Power Domains or
"PM domains" as we often also use within the Linux Kernel terminology.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912221127.487327-1-ulf.hansson@linaro.org
