* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
When printing the signal context's PC, we use a "%lx" format specifier,
which matches the common userland (glibc's) definition of uint64_t as an
"unsigned long". However the structure in question is defined in a
kernel uapi header, which uses a self defined __u64 type, and the arm64
kernel headers define this using "int-ll64.h", so it becomes an
"unsigned long long". This mismatch leads to the usual compiler warning.
The common fix would be to use "PRIx64", but because this is defined by
the userland's toolchain libc headers, it wouldn't match as well. Since
we know the exact type of __u64, just use "%llx" here instead, to silence
this warning.
This also fixes a more severe typo: "$lx" is not a valid format
specifier.
Fixes: 191e678bdc ("kselftest/arm64: Log unexpected asynchronous MTE faults")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-7-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Using pointers for the format specifier strings in printf-style
functions can create potential security problems, as the number of
arguments to be parsed could vary from call to call. Most compilers
consequently warn about those:
"format not a string literal and no format arguments [-Wformat-security]"
If we only want to print a constant string, we can just use a fixed "%s"
format instead, and pass the string as an argument.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-5-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If MTE is not available on a system, we detect this early and skip all
the MTE selftests. However this happens before we print the TAP plan, so
tools parsing the TAP output get confused and report an error.
Use the existing ksft_exit_skip() function to handle this, which uses a
dummy plan to work with tools expecting proper TAP syntax, as described
in the TAP specification.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-4-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The assembly portions of the MTE selftests need to be built with a
toolchain supporting MTE. Since we support GCC versions that lack MTE
support we have logic to suppress build of these tests when using such a
toolchain but that logic is broken for LLVM=1 builds, it uses CC but CC
is only set for LLVM builds in libs.mk which needs to be included after
we have selected which test programs to build.
Since all supported LLVM versions support MTE we can simply assume MTE
support when LLVM is set. This is not a thing of beauty but it does the
job.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-5-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fix following coccicheck warning:
tools/testing/selftests/arm64/mte/check_mmap_options.c:64:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:66:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:135:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:96:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_mmap_options.c:190:24-25:
WARNING: Use ARRAY_SIZE
Signed-off-by: KaiLong Wang <wangkailong@jari.cn>
Link: https://lore.kernel.org/r/777ce8ba.12e.184705d4211.Coremail.wangkailong@jari.cn
Signed-off-by: Will Deacon <will@kernel.org>
Use ARRAY_SIZE to fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_buffer_fill.c:341:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:35:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:168:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:72:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:369:25-26:
WARNING: Use ARRAY_SIZE
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20221105073143.78521-1-tegongkang@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently we set -march=armv8.5+memtag when building the MTE selftests,
allowing the compiler to emit v8.5 and MTE instructions for anything it
generates. This means that we may get code that will generate SIGILLs when
run on older systems rather than skipping on non-MTE systems as should be
the case. Most toolchains don't select any incompatible instructions but
I have seen some reports which suggest that some may be appearing which do
so. This is also potentially problematic in that if the compiler chooses to
emit any MTE instructions for the C code it may interfere with the MTE
usage we are trying to test.
Since the only reason we are specifying this option is to allow us to
assemble MTE instructions in mte_helper.S we can avoid these issues by
moving to using a .arch directive there and adding the -march explicitly to
the toolchain support check instead of the generic CFLAGS.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220928154517.173108-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stop using the KSFT_KHDR_INSTALL flag as installing the kernel headers
from the kselftest Makefile is causing some issues. Instead, rely on
the headers to be installed directly by the top-level Makefile
"headers_install" make target prior to building kselftest.
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
mte_switch_mode() currently rejects attempts to set a zero tag however
there are tests such as check_tags_inclusion which attempt to cover cases
with zero tags using mte_switch_mode(). Since it is not clear why we are
rejecting zero tags change the test to accept them.
The issue has not previously been as apparent as it should be since the
return value of mte_switch_mode() was not always checked in the callers
and the tests weren't otherwise failing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_child_memory.c:110:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:88:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:90:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:147:24-25:
WARNING: Use ARRAY_SIZE
`ARRAY_SIZE` macro is defined in tools/testing/selftests/kselftest.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419032501.22790-1-guozhengkui@vivo.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current tests use the prctls for various things but there's no
coverage of the edges of the interface so add some basics. This isn't
hugely useful as it is (it originally had some coverage for the
combinations with asymmetric mode but we removed the prctl() for that)
but it might be a helpful starting point for future work, for example
covering error handling.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE selftests have a helper evaluate_test() which translates a return
code into a call to ksft_test_result_*(). Currently this only handles pass
and fail, silently ignoring any other code. Update the helper to support
skipped tests and log any unknown return codes as an error so we get at
least some diagnostic if anything goes wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The GCR EL1 test unconditionally includes local definitions of the prctls
it tests. Since not only will the kselftest build infrastructure ensure
that the in tree uapi headers are available but the toolchain being used to
build kselftest may ensure that system uapi headers with MTE support are
available this causes the compiler to warn about duplicate definitions.
Remove these duplicate definitions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220126174421.1712795-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When skipping the tests due to a lack of system support for MTE we
currently print a message saying FAIL which makes it look like the test
failed even though the test did actually report KSFT_SKIP, creating some
confusion. Change the error message to say SKIP instead so things are
clearer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819172902.56211-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE selftests create temporary files in /dev/shm, for later mmap-ing
them. When there is no tmpfs mounted on /dev/shm, or /dev/shm does not
exist in the first place (on minimal filesystems), the error message is
not giving good hints:
# FAIL: Unable to open temporary file
# FAIL: memory allocation
not ok 17 Check initial tags with private mapping, ...
Add a perror() call, that gives both the filename and the actual error
reason, so that users get a chance of correcting that.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-12-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When clang finds a header file on the command line, it wants to
precompile that, which would end up in a separate output file.
Specifying -o on that same command line collides with that effort, so
the compiler complains:
clang: error: cannot specify -o when generating multiple output files
Since we are not really after a precompiled header, just drop the header
file from the command line, by removing it from the list of source
files in the Makefile.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-10-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
At the moment we check the compiler's ability to compile MTE enabled
code, but guard all the Makefile rules by it. As a consequence a broken
or not capable compiler just doesn't do anything, and make happily
returns without any error message, but with no programs created.
Since the MTE feature is only supported by recent aarch64 compilers (not
all stable distro compilers support it), having an explicit message
seems like a good idea. To not break building multiple targets, we let
make proceed without errors.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-9-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To check whether the CPU and kernel support the MTE features we want
to test, we use an (emulated) CPU ID register read. However we only
check against a very particular feature version (0b0010), even though
the ARM ARM promises ID register features to be backwards compatible.
While this could be fixed by using ">=" instead of "==", we should
actually use the explicit HWCAP2_MTE hardware capability, exposed by the
kernel via the ELF auxiliary vectors.
That moves this responsibility to the kernel, and fixes running the
tests on machines with FEAT_MTE3 capability.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-7-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The GCC manual suggests to use -pthread, when linking with the PThread
library, also to add this switch to both the compilation and linking
stages.
Do as the manual says, to fix compilation with Ubuntu's 20.04 toolchain,
which was getting -lpthread too early on the command line:
------------
/usr/bin/ld: /tmp/cc5zbo2A.o: in function `execute_test':
tools/testing/selftests/arm64/mte/check_gcr_el1_cswitch.c:86:
undefined reference to `pthread_create'
/usr/bin/ld: tools/testing/selftests/arm64/mte/check_gcr_el1_cswitch.c:90:
undefined reference to `pthread_join'
------------
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-3-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The mte selftest Makefile contains a check for GCC, to add the memtag
-march flag to the compiler options. This check fails if the compiler
is not explicitly specified, so reverts to the standard "cc", in which
case --version doesn't mention the "gcc" string we match against:
$ cc --version | head -n 1
cc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
This will not add the -march switch to the command line, so compilation
fails:
mte_helper.S: Assembler messages:
mte_helper.S:25: Error: selected processor does not support `irg x0,x0,xzr'
mte_helper.S:38: Error: selected processor does not support `gmi x1,x0,xzr'
...
Actually clang accepts the same -march option as well, so we can just
drop this check and add this unconditionally to the command line, to avoid
any future issues with this check altogether (gcc actually prints
basename(argv[0]) when called with --version).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-2-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
