The "function", "pins" and "groups" pinmux and pinctrl properties have
been standardized. Support them in addition to the custom "renesas,*"
properties. New-style and old-style properties can't be mixed in DT.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The example in the device tree binding documentation and the driver code
list hda2codec_2x as the last entry in the clock-names and reset-names
properties. Update the description of the properties to use the same
order.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix hda2codec_2x clock and reset names in Tegra30 HDA controller device
tree node documentation. While at it also fix coma vs. semicolon issue.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The MPP supports three modes; digital, analog and sink mode. This patch
implements support for the latter.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The cpufreq driver for Tegra124 will be a different one than the old
Tegra20 cpufreq driver (tegra-cpufreq), which does not use the device
tree.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DFLL is the main clocksource for the fast CPU cluster on Tegra124
and also provides automatic CPU rail voltage scaling as well. The DFLL
is a separate IP block from the usual Tegra124 clock-and-reset
controller, so it gets its own node in the device tree.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some brcmstb GPIO controllers can be used to wake from suspend, so use
the de facto standard property 'wakeup-source' to mark the nodes of
controllers with that capability.
Also document interrupts-extended, which will be used for wakeup
handling because the interrupt parent for the wake IRQ is different
from the regular IRQ.
While we're at it, a few more fixes: We don't actually use the
"interrupt-names" property, so remove it from the listed optional
properties and from the examples. And since we're modifying the
examples, also follow Brian's suggestions to:
- change #gpio-cells, #interrupt-cells, and brcm,gpio-bank-widths from
hex to dec
- use phandles
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Although "full barrier" should be interpreted as providing transitivity,
it is worth eliminating any possible confusion. This commit therefore
adds "(including transitivity)" to eliminate any possible confusion.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit changes the documentation of the rcutorture parameters to
better match reality.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull ARC fixes from Vineet Gupta:
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression
since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
* tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: support HS38 releases
ARC: make sure instruction_pointer() returns unsigned value
ARC: slightly refactor macros for boot logging
ARC: Add llock/scond to futex backend
arc:irqchip: prepare for drivers/irqchip/irqchip.h removal
ARC: Make ARC bitops "safer" (add anti-optimization)
ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ
ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler
ARCv2: intc: IDU: support irq affinity
ARC: fix unused var wanring
ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO
ARC: Override toplevel default -O2 with -O3
kbuild: Allow arch Makefiles to override {cpp,ld,c}flags
ARCv2: guard SLC DMA ops with spinlock
ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D
Jonathan writes:
First round of new drivers, cleanups and functionality for IIO in the 4.3 cycle.
Core and tools new stuff
* Allow explicit flush of hardware fifo by using an non blocking read.
This is needed to support some of the Android requirements for HW fifo
devices - also makes sense generally and clarifies a corner of the ABI.
* Add some missing modifier names. Mostly these exist for weird and
wonderful event types, but should still be present in the name array.
* Update iio_event_monitor to cope with new channel types.
* generic_buffer gains support for single byte scan elements (no idea
how this never got implemented before!)
New device support
* ROHM rpr0521 light and proximity sensor driver.
* bmc150 gains bmc156 support.
* ms5611 gains ms5607 temperature and pressure sensor support.
Driver functionality
* inv-mpu - add scale_available attributes to aid userspace in
configuring these devices.
* isl29125 - add scale_available attributes.
* stk8ba50 - sampling frequency control, triggered buffer support.
* stk8312 - sampling frequency control, triggered buffer support.
* cc10001 - ensure ADC powered up at probe time if shared by non linux
running CPUs.
* bmc150-magn - decouple the buffer and trigger allowing other triggers
to be used to drive this device's sampling.
Documentation
* Add some previously missed *scale_available attributes to the ABI docs.
Cleanups
* Clarify some crazy naming in iio_triggered_buffer_setup that seems to
have somehow ended up backwards (dates back a long way). Avoid the top
half and bottom half naming entirely given we are how dealing with a
handler and a thread in all cases.
* Tools cleanup including coding style, variable naming improvements, also
a new sanity check on a full event having been read.
* stk8ba50 - replace the scale table with a struct for clarity. Also suspend
the sensor if an error occurs in init.
* hid-sensor-prox - drop uneeded line break.
* mma9551 - use size in words for word read / write avoiding accidental
sending of an odd number of bytes.
* mma9553 - fix code alignment and document the use of a mutex.
* light/Kconfig - typo fix in commment.
* cm3323 - don't eat an error value, replace an unneeded local variable with
a generic local variable with the same use, add some blank lines for clarity.
* pressure/Kconfig - typo in Measurement Specialties name.
* bmc150-accel - actually use a mask definition rather than repeating the
value inline, code style cleanup.
* adc/Kconfig - general help description cleanup.
* ssp_sensors - drop redundant spi driver bus initialization (done in the
spi core)
* tmp006 - use genmask rather than hand generated masks.
* ms5611 - drop IIO_CHAN_INFO_SCALE as this driver provides a processed
output and as such the read only scale adds nothing useful.
* kxcjk-1013, adf4350, dummy - drop unwanted blank lines.
* Drop all owner assignments from i2c_drivers and this is done in the
i2c core.
Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes in
4.2-rc are addressed already (by converting more towards atomic
instead of minimal duct-tape) so just always pick the version in next
for the conflicts in modeset code.
All the other conflicts are just adjacent lines changed.
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_ringbuffer.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The snvs-pwrkey is designed to enable POWER key function which controlled
by SNVS ONOFF. the driver can report the status of POWER key and wakeup
system if pressed after system suspend.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
snvs actually is multi fucntion driver.
Change to use syscon to access register.
Change snvs parent interrupt to option because single function
may have seperated irq number.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add documentation derived from kernel/cgroup_pids.c to the relevant
Documentation/ directory, along with a few examples of how to use the
PIDs controller as well an explanation of its peculiarities.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
docproc.c was moved in 2011 from scripts/basic to scripts
-> updated the references accordingly
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
"facilitate easier reviewing" says the same thing twice.
Signed-off-by: Sébastien Hinderer <Sebastien.Hinderer@ens-lyon.org>
[jc: made it "easier review"]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This board is used in some TV-boxes like for example the Beelink R89 or
Tronsmart R28.
The board itself follows the reference design for the most part. But
there are no schematics available it seems, so some things should be
taken with a grain of salt.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
CIAA stands for Argentine Open Industrial Computer. The CIAA project
is an initiative sponsored by universities and private companies.
Its main goal is to promote local embedded systems development.
Among other devices, the project developed a NXP LPC4337-based
reference design.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Conflicts:
net/bridge/br_mdb.c
Minor conflict in br_mdb.c, in 'net' we added a memset of the
on-stack 'ip' variable whereas in 'net-next' we assign a new
member 'vid'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan writes:
First set of IIO fixes for the 4.2 cycle.
* Fix a regression in hid sensors suspend time as a result of adding runtime
pm. The normal flow of waking up devices in order to go into suspend
(given the devices are normally suspended when not reading) to a regression
in suspend time on some laptops (reports of an additional 8 seconds).
Fix this by checking to see if a user action resulting in the wake up, and
make it a null operation if it didn't. Note that for hid sensors, there is
nothing useful to be done when moving into a full suspend from a runtime
suspend so they might as well be left alone.
* rochip_saradc: fix some missing MODULE_* data including the licence so that
the driver does not taint the kernel incorrectly and can build as a module.
* twl4030 - mark irq as oneshot as it always should have been.
* inv-mpu - write formats for attributes not specified, leading to miss
interpretation of the gyro scale channel when written.
* Proximity ABI clarification. This had snuck through as a mess. Some
drivers thought proximity went in one direction, some the other. We went
with the most common option, documented it and fixed up the drivers going
the other way. Fix for sx9500 included in this set.
* ad624r - fix a wrong shift in the output data.
* at91_adc - remove a false limit on the value of the STARTUP register
applied by too small a type for the device tree parameter.
* cm3323 - clear the bits when setting the integration time (otherwise
we can only ever set more bits in the relevant field).
* bmc150-accel - multiple triggers are registered, but on error were not being
unwound in the opposite order leading to removal of triggers that had not
yet successfully been registered (count down instead of up when unwinding).
* tcs3414 - ensure right part of val / val2 pair read so that the integration
time is not always 0.
* cc10001_adc - bug in kconfig dependency. Use of OR when AND was intended.
The option is not needed if chip is always on or managed by some other part
of system like platform card driver.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add optional interrupt support to the da9210 regulator driver, to handle
over-current, under- and over-voltage, and over-temperature events.
Only the interrupt sources for which we handle events are unmasked, to
avoid interrupts we cannot handle.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
The controller has a RESET pin which is usually controlled over
a GPIO line. If such a GPIO is provided, perform a RESET
during probe.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull ARM SoC fixes from Kevin Hilman:
"A fairly random colletion of fixes based on -rc1 for OMAP, sunxi and
prima2 as well as a few arm64-specific DT fixes.
This series also includes a late to support a new Allwinner (sunxi)
SoC, but since it's rather simple and isolated to the
platform-specific code, it's included it for this -rc"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG
arm: dts: vexpress: add missing CCI PMU device node to TC2
arm: dts: vexpress: describe all PMUs in TC2 dts
GICv3: Add ITS entry to THUNDER dts
arm64: dts: Add poweroff button device node for APM X-Gene platform
ARM: dts: am4372.dtsi: disable rfbi
ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2
ARM: dts: am4372: Add emif node
Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep"
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
ARM: prima2: move to use REGMAP APIs for rtciobrg
ARM: dts: atlas7: add pinctrl and gpio descriptions
ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps
memory: omap-gpmc: Fix parsing of devices
In f35f6c8f7 (can: update MAINTAINERS and Documentation) chapter 3.3
was removed. This patch fixes some old references to chapter 3.4 which
no longer exists.
Signed-off-by: Stefan Tatschner <stefan@sevenbyte.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Extend the kernel-bootloader interface documentation with usage of
register INFORM1 (0x0804) and different CPU resume address on Exynos542x
family (with Multi-Cluster Power Management enabled).
Additionally add glossary and reformat section titles.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link to the internal up to date Coding Style document inside the Kernel
sources instead of an external one.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Remove 2 broken links for programming reference books in Appendix I. After
a lookup on an Internet archives web site, it seems that these links have
been broken for around 3 months. We can then assume that they will not be
back up and safely remove them from the documentation.
Signed-off-by: Olivier C. Larocque <olivier.c.larocque@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add ASoC driver bindings documentation.
Describe the required properties for each of the hardware IPs drivers.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some kernel-doc sections are included in multiple DocBook files. This
means the mandocs target will generate the same manual page multiple
times with different metadata (author name/address and manual title,
taken from the including DocBook file). If it's invoked in a parallel
build, the output is nondeterminstic.
For each section that is duplicated, mark the less specific manual's
inclusion as 'extra' and exclude it during conversion to manual pages.
Use xmlif for this, as that is bundled with xmlto which we already
use.
I would have preferred to use more conventional markup for this, but
each of the following approaches failed:
1. Wrap the extra inclusions with a new element and add a template to
the stylesheet to include/exclude them. Unfortunately DocBook XSL
doesn't seem to support foreign elements at an intermediate level
in the document tree.
2. Use DocBook profiling. This works but requires passing an absolute
path to the profile stylesheet to xmlto, so it's not portable.
3. Use SGML marked sections. docbook2x can handle these but xmlto
chokes on them.
Reported-by: Jérémy Bobbio <lunar@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
By default, DocBook XSL uses a non-deterministic function to generate
IDs for HTML elements where it can't take a name from the input
document. However, it has the option to generate 'consistent'
(deterministic) IDs instead. Enable this to make the HTML pages
reproducible.
Reported-by: Jérémy Bobbio <lunar@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The mtime on a man page is the build time. As gzip stores the mtime
and original name in the compressed file by default, this makes
compressed man pages unreproducible. Neither of these are important
metadata in this case, so turn this off.
Reported-by: Jérémy Bobbio <lunar@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
"CoreLink Level 2 Cache Controller L2C-310", p. 2-15, section 2.3.2
Shareable attribute" states:
"The default behavior of the cache controller with respect to the
shareable attribute is to transform Normal Memory Non-cacheable
transactions into:
- cacheable no allocate for reads
- write through no write allocate for writes."
Depending on the system architecture, this may cause memory corruption
in the presence of bus mastering devices (e.g. OHCI). To avoid such
corruption, the default behavior can be disabled by setting the Shared
Override bit in the Auxiliary Control register.
Currently the Shared Override bit can be set only using C code:
- by calling l2x0_init() directly, which is deprecated,
- by setting/clearing the bit in the machine_desc.l2c_aux_val/mask
fields, but using values differing from 0/~0 is also deprecated.
Hence add support for an "arm,shared-override" device tree property for
the l2c device node. By specifying this property, affected systems can
indicate that non-cacheable transactions must not be transformed.
Then, it's up to the OS to decide. The current behavior is to set the
"shared attribute override enable" bit, as there may exist kernel linear
mappings and cacheable aliases for the DMA buffers, even if CMA is
enabled.
See also commit 1a8e41cd67 ("ARM: 6395/1: VExpress: Set bit 22 in
the PL310 (cache controller) AuxCtlr register"):
"Clearing bit 22 in the PL310 Auxiliary Control register (shared
attribute override enable) has the side effect of transforming
Normal Shared Non-cacheable reads into Cacheable no-allocate reads.
Coherent DMA buffers in Linux always have a Cacheable alias via the
kernel linear mapping and the processor can speculatively load
cache lines into the PL310 controller. With bit 22 cleared,
Non-cacheable reads would unexpectedly hit such cache lines leading
to buffer corruption."
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The parallel-display driver used an undocumented, non-standard property
"fsl,panel" to optionally associate with a drm_panel device. This patch
fixes the driver to use the same OF graph bindings as the LDB driver
instead:
parallel-display {
compatible = "fsl,imx-parallel-display";
...
port@1 {
reg = <1>;
parallel_out: endpoint {
remote_endpoint = <&panel_in>;
};
};
};
panel {
...
port {
panel_in: endpoint {
remote-endpoint = <¶llel_out>;
};
};
};
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Add support to allow non-local binds similar to how this was done for IPv4.
Non-local binds are very useful in emulating the Internet in a box, etc.
This add the ip_nonlocal_bind sysctl under ipv6.
Testing:
Set up nonlocal binding and receive routing on a host, e.g.:
ip -6 rule add from ::/0 iif eth0 lookup 200
ip -6 route add local 2001:0:0:1::/64 dev lo proto kernel scope host table 200
sysctl -w net.ipv6.ip_nonlocal_bind=1
Set up routing to 2001:0:0:1::/64 on peer to go to first host
ping6 -I 2001:0:0:1::1 peer-address -- to verify
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge "omap fixes against v4.2-rc1" from Tony Lindgren:
Minor fixes for omaps against v4.2-rc1. Mostly just minor dts changes
except for a GPMC fix to not use names for probing devices. Also a
one liner clean-up to remove unecessary return from a void function.
The summary for the changes being:
- Fix probe for GPMC devices by reoving limitations based on device
name
- Remove unnecessary return from a void function
- Revert beaglebone RTC sleep fix, we now have a better fix merged
- Add am4372 EMIF node to fix a warning
- Add am57xx-beagle-x15 power supply to fix USB2 if USB1 is disabled
- Disable rfbi for am4372 as it does not have a driver
* tag 'omap-for-v4.2/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am4372.dtsi: disable rfbi
ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2
ARM: dts: am4372: Add emif node
Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep"
ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps
memory: omap-gpmc: Fix parsing of devices
Merge "Allwinner late changes for 4.2" from Maxime Ripard:
Allwinner late changes for 4.2
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
* tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
I am a high school student trying to become familiar with
Linux kernel development. The btrfs documentation in
Documentation/filesystems had a few typos and errors in
whitespace. This patch corrects both of these.
Signed-off-by: Daniel Grimshaw <grimshaw@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
