Using a fixed (by DTS) parent for clocks when turning on the power
domain may introduce issues in other drivers. For example when such
driver changes the parent during runtime and expects that he is the
only place of such change.
Do not rely on DTS providing the fixed parent for such clocks. Instead
before switching domain off, grab a current parent of a clock with
clk_get_parent().
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This is now very simple to do. The only interesting part is a simple
trick to find the right memslot in gfn_to_rmap, retrieving the address
space from the spte role word. The same trick is used in the auditing
code.
The comment on top of union kvm_mmu_page_role has been stale forever,
so remove it. Speaking of stale code, remove pad_for_nice_hex_output
too: it was splitting the "access" bitfield across two bytes and thus
had effectively turned into pad_for_ugly_hex_output.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only two ioctls have to be modified; the address space id is
placed in the higher 16 bits of their slot id argument.
As of this patch, no architecture defines more than one
address space; x86 will be the first.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document the new Transfer Function control (and fix the documentation for
the other colorspace controls which were not quite correct).
Mention the support for 4:2:0 and more multiplanar formats.
Update the TODO list at the end.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Document the new field and defines to set the transfer function needed
to correctly decode the colors of an image.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds two boolean properties to FMan Port.
FMan has 3 types of ports:
- 1G ports
By default, all ports support 1G rate
- 10G Ports
Port which use 10G hardware, and configured as 10G
- 10G Best effort ports
Ports which use 1G hardware, configured as 10G, in this case,
the rate is not guaranteed.
The new properties help to distinguish the different type of ports.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
The check_acl inode operation and the IPERM_FLAG_RCU flag are long gone; update
the documentation.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Documentation/networking/timestamping/txtimestamp.c: In function ‘__print_timestamp’:
Documentation/networking/timestamping/txtimestamp.c:99:3: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘int64_t’ [-Wformat=]
fprintf(stderr, " (%+ld us)", cur_ms - prev_ms);
int64_t differs per platform, so a type specifier that differs along
with it is required.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The current documentation is incomplete wrt the intel_pstate legacy
internal governors. The confusion comes from the general cpufreq
governors which also use the names performance and powersave. This patch
better differentiates between the two sets of governors and gives an
explanation of how the internal P-state governors behave differently from
one another.
Also fix two minor typos.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Kristen Carlson Accardi <kristen@linux.intel.com>
Cc: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: x86@kernel.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Current documentation over use case for EXPORT_SYMBOL_GPL()
only acknowledges functions which are "an internal implementation
issue, and not really an interface". In practice these days
though we have some maintainers taking on preferences to require
all new functionality go in with EXPORT_SYMBOL_GPL().
A maintainer asking developers to use EXPORT_SYMBOL_GPL()
for new functionality tends to be a well accepted and understood
position that maintainers can take and typically requires the
maintainers educating contributing developers on their own
positions and requirements.
Developers who submit code to maintainers not familiar with
these preferences as optional for new functionality need explicit
guidence though as existing documentation does not acknowledge
this as a valid possibility. Without this being documented some
maintainers are reluctant to accept new functionality with
EXPORT_SYMBOL_GPL().
This extends the use case documentation for EXPORT_SYMBOL_GPL()
to acknowledge acceptance for new functionality.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
[jc: wording tweaked with permission]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch includes changes to the external API for SMM support.
Userspace can predicate the availability of the new fields and
ioctls on a new capability, KVM_CAP_X86_SMM, which is added at the end
of the patch series.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the devicetree documentation for the ZTE
zx296702 I2S audio controller.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the devicetree documentation for the ZTE
zx296702 SPDIF audio controller.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Patch "gpiolib: rename gpiod_set_array to gpiod_set_array_value" omitted
to also change the function names in the documentation. Let's fix that.
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Clarify in documentation and code that IPV4 FIB add operation is used for
both adding a new FIB entry to the device and for modifying an existing FIB
entry on the device.
Also, remove left-over references to ipv4_fib ops and replace with details
on SWITCHDEV_PORT_IPV4_FIB object.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the TI dp83867 Gigabit ethernet phy
device.
The DP83867 is a robust, low power, fully featured
Physical Layer transceiver with integrated PMD
sublayers to support 10BASE-T, 100BASE-TX and
1000BASE-T Ethernet protocols.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Please pull the contents of "Use DRM component API in tilcdc to
connect to tda998x" patch series.
* 'linux-4.1.0-rc5-tilcdc-refactor' of https://github.com/jsarha/linux:
drm/tilcdc: Force building of DRM_TILCDC_SLAVE_COMPAT
drm/tilcdc: Add DRM_TILCDC_SLAVE_COMPAT for ti,tilcdc,slave binding support
drm/tilcdc: use pm_runtime_irq_safe()
drm/tilcdc: Add support for external tda998x encoder
drm/tilcdc: Remove tilcdc slave support for tda998x driver
drm/tilcdc: Fix module unloading
One more round of drm-misc, again mostly atomic. Big thing is the
userspace blob code from Daniel Stone, with support for the mode_id blob
now added to the atomic ioctl. Finally we can do atomic modesets!
Note that the atomic ioctl is still behind the module knob since the
weston patches aren't quite ready yet imo - they lack TEST_ONLY support,
which is a fairly crucial bit of the atomic api. But besides that I think
it's all good to go. That's also why we didn't bother to hide the new blob
ioctls behind the knob, that part won't need to change. And if weston
patches get in shape in time we could throw the "atomic by default patch"
on top for 4.2.
* tag 'topic/drm-misc-2015-05-27' of git://anongit.freedesktop.org/drm-intel:
drm: Fix off-by-one in vblank hardware counter wraparound handling
drm/atomic: fix out of bounds read in for_each_*_in_state helpers
drm/atomic: Add MODE_ID property
drm/atomic: Add current-mode blob to CRTC state
drm: Add drm_atomic_set_mode_for_crtc
drm: check for garbage in unused addfb2 fields
drm: Retain reference to blob properties in lookup
drm/mode: Add user blob-creation ioctl
drm: Return error value from blob creation
drm: Allow creating blob properties without copy
drm/mode: Unstatic kernel-userspace mode conversion
drm/mode: Validate modes inside drm_crtc_convert_umode
drm/crtc_helper: Replace open-coded CRTC state helpers
drm: kerneldoc fixes for blob properties
drm/DocBook: Add more drm_bridge documentation
drm: bridge: Allow daisy chaining of bridges
drm/atomic: add all affected planes in drm_atomic_helper_check_modeset
drm/atomic: add drm_atomic_add_affected_planes
drm/atomic: add commit_planes_on_crtc helper
This driver supports the TI CDCE925 programmable clock synthesizer.
The chip contains two PLLs with spread-spectrum clocking support and
five output dividers. The driver only supports the following setup,
and uses a fixed setting for the output muxes:
Y1 is derived from the input clock
Y2 and Y3 derive from PLL1
Y4 and Y5 derive from PLL2
Given a target output frequency, the driver will set the PLL and
divider to best approximate the desired output.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Even if not documented in the datasheet, the Armada 370 SoC can actually
gate the CESA (crypto engine) clock.
Add an entry in the gating_desc table to be able to reference the CESA
gateclk in the crypto node.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
The previous patches added arch support matrices for more than 40 generic kernel features
that need per architecture support.
The structure of the feature descriptions is the following:
Each feature has its own directory under Documentation/features/subsystem_name/feature_name/,
and the arch-support.txt file shows its current arch porting status.
For example, lockdep support is shown the following way:
triton:~/tip> cat Documentation/features/locking/lockdep/arch-support.txt
#
# Feature name: lockdep
# Kconfig: LOCKDEP_SUPPORT
# description: arch supports the runtime locking correctness debug facility
#
-----------------------
| arch |status|
-----------------------
| alpha: | TODO |
| arc: | ok |
| arm: | ok |
| arm64: | ok |
| avr32: | ok |
| blackfin: | ok |
| c6x: | TODO |
| cris: | TODO |
| frv: | TODO |
| h8300: | TODO |
| hexagon: | ok |
| ia64: | TODO |
| m32r: | TODO |
| m68k: | TODO |
| metag: | ok |
| microblaze: | ok |
| mips: | ok |
| mn10300: | TODO |
| nios2: | TODO |
| openrisc: | TODO |
| parisc: | TODO |
| powerpc: | ok |
| s390: | ok |
| score: | ok |
| sh: | ok |
| sparc: | ok |
| tile: | ok |
| um: | ok |
| unicore32: | ok |
| x86: | ok |
| xtensa: | ok |
-----------------------
For generic kernel features that need architecture support, the
arch-support.txt file in each feature directory shows the arch
support matrix, for all upstream Linux architectures.
The meaning of entries in the tables is:
| ok | # feature supported by the architecture
|TODO| # feature not yet supported by the architecture
| .. | # feature cannot be supported by the hardware
This directory structure can be used in the future to add other
files - such as porting guides, testing description, etc.
The Documentation/features/ hierarchy may also include generic
kernel features that works on every architecture, in that case
the arch-support.txt file will list every architecture as
supported.
To list an architecture's unsupported features, just do something
like:
triton:~/tip> git grep -lE 'x86.*TODO' Documentation/features/*/*/arch-support.txt
Documentation/features/lib/strncasecmp/arch-support.txt
Documentation/features/time/arch-tick-broadcast/arch-support.txt
which will print the list of not yet supported features.
The Documentation/features/list-arch.sh script will print the current
support matrix of one architecture:
triton:~/tip> Documentation/features/list-arch.sh
#
# Kernel feature support matrix of the 'x86' architecture:
#
core/ BPF-JIT : ok | HAVE_BPF_JIT # arch supports BPF JIT optimizations
core/ generic-idle-thread : ok | GENERIC_SMP_IDLE_THREAD # arch makes use of the generic SMP idle thread facility
core/ jump-labels : ok | HAVE_ARCH_JUMP_LABEL # arch supports live patched, high efficiency branches
core/ tracehook : ok | HAVE_ARCH_TRACEHOOK # arch supports tracehook (ptrace) register handling APIs
debug/ gcov-profile-all : ok | ARCH_HAS_GCOV_PROFILE_ALL # arch supports whole-kernel GCOV code coverage profiling
debug/ KASAN : ok | HAVE_ARCH_KASAN # arch supports the KASAN runtime memory checker
debug/ kgdb : ok | HAVE_ARCH_KGDB # arch supports the kGDB kernel debugger
debug/ kprobes : ok | HAVE_KPROBES # arch supports live patched kernel probe
debug/ kprobes-on-ftrace : ok | HAVE_KPROBES_ON_FTRACE # arch supports combined kprobes and ftrace live patching
debug/ kretprobes : ok | HAVE_KRETPROBES # arch supports kernel function-return probes
debug/ optprobes : ok | HAVE_OPTPROBES # arch supports live patched optprobes
debug/ stackprotector : ok | HAVE_CC_STACKPROTECTOR # arch supports compiler driven stack overflow protection
debug/ uprobes : ok | ARCH_SUPPORTS_UPROBES # arch supports live patched user probes
debug/ user-ret-profiler : ok | HAVE_USER_RETURN_NOTIFIER # arch supports user-space return from system call profiler
io/ dma-api-debug : ok | HAVE_DMA_API_DEBUG # arch supports DMA debug facilities
io/ dma-contiguous : ok | HAVE_DMA_CONTIGUOUS # arch supports the DMA CMA (continuous memory allocator)
io/ dma_map_attrs : ok | HAVE_DMA_ATTRS # arch provides dma_*map*_attrs() APIs
io/ sg-chain : ok | ARCH_HAS_SG_CHAIN # arch supports chained scatter-gather lists
lib/ strncasecmp : TODO | __HAVE_ARCH_STRNCASECMP # arch provides an optimized strncasecmp() function
locking/ cmpxchg-local : ok | HAVE_CMPXCHG_LOCAL # arch supports the this_cpu_cmpxchg() API
locking/ lockdep : ok | LOCKDEP_SUPPORT # arch supports the runtime locking correctness debug facility
locking/ queued-rwlocks : ok | ARCH_USE_QUEUED_RWLOCKS # arch supports queued rwlocks
locking/ queued-spinlocks : ok | ARCH_USE_QUEUED_SPINLOCKS # arch supports queued spinlocks
locking/ rwsem-optimized : ok | Optimized asm/rwsem.h # arch provides optimized rwsem APIs
perf/ kprobes-event : ok | HAVE_REGS_AND_STACK_ACCESS_API # arch supports kprobes with perf events
perf/ perf-regs : ok | HAVE_PERF_REGS # arch supports perf events register access
perf/ perf-stackdump : ok | HAVE_PERF_USER_STACK_DUMP # arch supports perf events stack dumps
sched/ numa-balancing : ok | ARCH_SUPPORTS_NUMA_BALANCING # arch supports NUMA balancing
seccomp/ seccomp-filter : ok | HAVE_ARCH_SECCOMP_FILTER # arch supports seccomp filters
time/ arch-tick-broadcast : TODO | ARCH_HAS_TICK_BROADCAST # arch provides tick_broadcast()
time/ clockevents : ok | GENERIC_CLOCKEVENTS # arch support generic clock events
time/ context-tracking : ok | HAVE_CONTEXT_TRACKING # arch supports context tracking for NO_HZ_FULL
time/ irq-time-acct : ok | HAVE_IRQ_TIME_ACCOUNTING # arch supports precise IRQ time accounting
time/ modern-timekeeping : ok | !ARCH_USES_GETTIMEOFFSET # arch does not use arch_gettimeoffset() anymore
time/ virt-cpuacct : ok | HAVE_VIRT_CPU_ACCOUNTING # arch supports precise virtual CPU time accounting
vm/ ELF-ASLR : ok | ARCH_HAS_ELF_RANDOMIZE # arch randomizes the stack, heap and binary images of ELF binaries
vm/ huge-vmap : ok | HAVE_ARCH_HUGE_VMAP # arch supports the ioremap_pud_enabled() and ioremap_pmd_enabled() VM APIs
vm/ ioremap_prot : ok | HAVE_IOREMAP_PROT # arch has ioremap_prot()
vm/ numa-memblock : ok | HAVE_MEMBLOCK_NODE_MAP # arch supports NUMA aware memblocks
vm/ PG_uncached : ok | ARCH_USES_PG_UNCACHED # arch supports the PG_uncached page flag
vm/ pmdp_splitting_flush : ok | __HAVE_ARCH_PMDP_SPLITTING_FLUSH # arch supports the pmdp_splitting_flush() VM API
vm/ pte_special : ok | __HAVE_ARCH_PTE_SPECIAL # arch supports the pte_special()/pte_mkspecial() VM APIs
vm/ THP : ok | HAVE_ARCH_TRANSPARENT_HUGEPAGE # arch supports transparent hugepages
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
