This patch add PWM(Pulse Width Modulation) node and
handle to use pwm property.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Specify the default mux and divider clocks in device tree
to ensure the FIMC devices on Trats, Trats2, Universal_c210
and Odroid X2/U3 boards are clocked from recommended clock
source and with maximum supported frequency.
For Trats2 also the MIPI-CSIS and the camera sensor clocks
are configured, the 'clock-frequency' property is deprecated
in favour of 'assigned-clock-rates' property.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Synology DS414 is a 4-bay NAS powered by a Marvell Armada XP
(mv78230 dual-core @1.33Ghz). It is very similar on many aspects
to previous 4-bay synology models based on Marvell kirkwood SoC.
Here is a short summary of the device:
- 1GB RAM
- Boot on SPI flash (64Mbit Micron N25Q064)
- 2 GbE interfaces (Armada MAC connected to two Marvell 88E1512
PHY via RGMII)
- 1 front USB 2.0 ports (directly handled by the Armada 370)
- 2 rear USB 3.0 ports (handled by an EtronTech EJ168A XHCI
controller on the PCIe bus)
- 4 internal SATA ports handled by a Marvell 88SX7042 SATA-II
controller on the PCIe bus)
- Seiko S-35390A I2C RTC chip
- UART0 providing serial console
- UART1 used for poweroff (connected to a Microchip PIC16F883)
Additional note: the front LEDs the and the two fans are not directly
connected to the SoC and under its control. The former are presumably
driven by the SATA controller, the latter by the PIC.
[ jac: fixed up s/ge[01]_rgmii_pins/pmx_ge[01]_rgmii/ to match
armada-xp.dtsi ]
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/5b678d6d1f2f42f4bf0d087878b9d8024d463ea7.1416613429.git.arno@natisbad.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Synology DS213j is a 2-bay NAS powered by a Marvell Armada 370
(88F6710 @1.2Ghz). It is very similar on many aspects to previous
2-bay synology models based on Marvell kirkwood SoC. Here is a
short summary of the device:
- 512MB RAM
- boot on SPI flash (64Mbit Micron N25Q064)
- 1 GbE interface (Armada MAC connected to a Marvell 88E1512
PHY via SGMII)
- 2 rear USB 2.0 ports (directly handled by the Armada 370)
- 2 internal SATA ports handled by the Armada 370: 2 GPIO for
presence, 2 for powering them
- two front amber LED (disk1, disk2) controlled by the SoC
- Seiko S-35390A I2C RTC chip
- UART0 providing serial console
- UART1 used for poweroff (connected to a TI MSP430F2111)
- Fan handled via 4 GPIO (3 for speed, 1 for alarm)
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/20f1a03897df1d825b62abdd525e588a8e39b3ec.1416613429.git.arno@natisbad.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This patch defines common Armada XP pinctrl settings in armada-xp.dtsi
for the supported SPI interface (MPP36-39) and use it as default
for Armada XP spi interface. That being done, it removes the now
redundant definitions in armada-xp-axpwifiap.dts.
Note: this patch has the potential to break out-of-tree users w/o
specific pinctrl settings for their spi interfaces if the default
above does not match their config (i.e. if they do not use CS0).
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/d404b7abd80ee5a0fd8e8d3586d33cd37740d589.1416613429.git.arno@natisbad.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This patch defines common Armada 370 pinctrl settings for spi0 and spi1
interfaces:
spi0: MPP33-36 as default, MPP32,63-65 as available alternate config
spi1: MPP49-52 as default
Currently, the Armada 370 DB .dts file has no explicit pinctrl info
for the spi0 interface used to access the flash on the board. The
patch fixes that by also adding explicit pinctrl info (MPP32,63-65)
for this SPI interface.
Note: this patch has the potential to break out-of-tree users w/o
specific pinctrl settings for their spi interfaces if the default
above does not match their config.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/1e812eb63b37718e273463e22e4d7512f8f0b624.1416613429.git.arno@natisbad.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
What was done by Sebastian in 264a05e19b ("ARM: mvebu: armada-xp:
Add node alias to pinctrl and add base address") and 01c434225e
("ARM: mvebu: armada-xp: Use pinctrl node alias") can also be done for
Armada 370, i.e.
- Rename Armada 370 pinctrl node to pin-ctrl with its address encoded
- Add a node alias to access the pinctrl node easily.
- use the newly available alias in existing Armada 370 .dts files
We can even go a bit further by putting the pinctrl node definition in
armada-370-xp.dtsi, with only its reg property defined. This allows us
to then also use the newly defined node alias in armada-xp.dtsi,
armada-370.dtsi.
Suggested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/b54eb45e5242728aace3ce8aef2eae4251f8dea3.1416613429.git.arno@natisbad.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
In order to update MAC address entries in the ethernet nodes in Device Tree
both mainline U-Boot and Barebox bootloaders accept the same format of aliases,
which is 'ethernetX', where X stands for an interface number.
Other platforms in the mainline Linux, that comprise ethernet references in
'/aliases' node (like various flavours of imx or sunXi), follow the naming
scheme described above.
This commit ajusts ethernet aliases of Marvell Armada 38x SoC to be properly
recognized by bootloaders' MAC address fixup routines.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1415980652-7429-5-git-send-email-mw@semihalf.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Marvell Armada 38x SoC's SDHCI interface is capable of using 1.8v voltage,
needed for driving "UHS-I" SD cards at their full speed. It is not, however,
possible on the DB board. Due to physical connectivity connector supply is tied
to 3v and any attempt of changing voltage in order to operate in the fastest UHS
modes fails.
This patch enables equivalent SDHCI quirk in order to adjust controller
operation to system capabilities.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1415980652-7429-3-git-send-email-mw@semihalf.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This patch adds tscadc DT entries for am437x-gp-evm
and am43x-epos-evm.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add node for RTC.
Note that on dra7xx are no separate interrupts for alram
and timer unlike for SoCs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[nm@ti.com: update with rtc crossbar number]
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds support for the N900's battery to the
Nokia N900 DTS file.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The HDMI node does not have a power supply attached. As a result its
power regulator, VDAC, shuts off on boot and screen loses signal.
This attaches VDAC (vdda_hdmi_dac) to HDMI's vdda-supply.
Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since commit e409dfbfcc ("ASoC: dapm: Add a few supply widget sanity
checks") the following error is seen:
imx-wm8962 sound: wm8962 <-> 202c000.ssi mapping ok
imx-wm8962 sound: Connecting non-supply widget to supply widget is not supported (AMIC -> MICBIAS)
imx-wm8962 sound: ASoC: no dapm match for AMIC --> (null) --> MICBIAS
imx-wm8962 sound: ASoC: Failed to add route AMIC -> direct -> MICBIAS
Invert the route between the microphone and the bias in order to fix it.
While at it, align the audio routing with imx6sl-evk and imx6sx-sdb, which have
the same wm8962 circuitry.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
imx6qdl-rex boards use sgtl5000 codec and the machine file (imx-sgtl5000)
already sets SSI in slave mode and codec in master mode, so there is no need
for having this property.
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
imx6qdl-gw5x boards use sgtl5000 codec and the machine file (imx-sgtl5000)
already sets SSI in slave mode and codec in master mode, so there is no need
for having this property.
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Use IMX6QDL_CLK_CKO definition instead of its hard coded clock number for better
readability.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Several more OMAP patches targeted for v3.19. They include:
- OMAP4/5: DSS hwmod cleanup patches from Tomi Valkeinen.
- DRA7xx: hwmod data support for UARTs 7 through 10.
- AM43xx: hwmod data support for the onboard ADC.
Basic build, boot, and PM test reports are here:
http://www.pwsan.com/omap/testlogs/omap-b-for-v3.19/20141121110550/
Note that I cannot test the DRA7xx or AM43xx patches, since I do not have
these boards.
Pull "SoCFPGA DTS updates for v3.19" from Dinh Nguyen:
- Add DTS support for a new chip in the SOCFPGA family, the Arria 10.
- Enable watchdog node.
- Add SPI nodes.
- Add the OCRAM node.
* tag 'socfpga_dts_updates_for_v3.19' of git://git.rocketboards.org/linux-socfpga-next:
arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC
arm: dts: socfpga: enable watchdog for socfpga platform
arm: dts: socfpga: Add SPI nodes to SOCFPGA DT.
arm: dts: socfpga: Add OCRAM node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Second Round of Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman:
* Add labels for LEDs on kzm9g-reference and koelsch
* Add Sound support to r8a7790/lager and r8a7791/koelsch
* Add IIC DMA nodes to r8a7790 and r8a7791
* Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4
* Add SGX, MMP and VSP1 clocks to r8a7794
* Add USBDMAC{0,1} clocks to r8a7790 and r8a7791
* tag 'renesas-dt2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree
ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device tree
ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree
ARM: shmobile: r8a7794: Add SGX clock to device tree
ARM: shmobile: koelsch: add Volume Ramp usage on comment
ARM: shmobile: lager: add Volume Ramp usage on comment
ARM: shmobile: r8a7791: add DMA nodes for IIC
ARM: shmobile: r8a7790: add DMA nodes for IIC
ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs
ARM: shmobile: koelsch dts: Add labels for the LEDs
ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties
ARM: shmobile: koelsch: Sound DMA support via DVC on DTS
ARM: shmobile: koelsch: Sound DMA support via SRC on DTS
ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS
ARM: shmobile: koelsch: Sound DMA support on DTS
ARM: shmobile: koelsch: Sound PIO support on DTS
ARM: shmobile: koelsch: fixup I2C2 clock frequency
ARM: shmobile: lager: Sound DMA support via DVC on DTS
ARM: shmobile: lager: Sound DMA support via SRC on DTS
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Berlin DT changes for v3.19 (round 2)" from Sebastian Hesselbarth:
- AHCI and SATA PHY nodes for BG2
- USB and USB PHZ nodes for BG2/BG2CD/BG2Q
* tag 'berlin-dt-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin:
ARM: dts: berlin: enable USB on the Google Chromecast
ARM: dts: berlin: add BG2CD nodes for USB support
ARM: dts: Berlin: enable USB on the BG2Q DMP
ARM: dts: berlin: add BG2Q nodes for USB support
ARM: berlin: Enable SATA on Sony NSZ-GS7
ARM: berlin: Add AHCI and SATA PHY nodes to BG2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Arria 10 is latest SOC+FPGA from the Altera SOCFPGA platform. The Arria10
SOC shares some similarities with the SOCFPGA Cyclone5 and Arria5, but there
are enough differences to warrant a new base dtsi.
The differences are:
* 3 EMAC controllers
* 5 I2C controllers
* 3 SPI controllers
* 1.5 GHZ dual A9s
* Support for DDR4
Besides the usual memory map and IRQ changes, the clock framework will be
different, so this patch just adds the fixed-clocks.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Pull "ARM: rockchip: second batch of dts related changes" from Heiko Stuebner:
- the dts part of the rk3288 smp support
- rate init for rk3288 clocks
- enablement of various peripherals
- new boardfile for Haoyu Marsboard (rk3066 based)
* tag 'v3.19-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable PWM on Radxa Rock
ARM: dts: rockchip: fix invalid unit-address in rk3188.dtsi
ARM: dts: rk3288: add VOP iommu nodes
ARM: dts: rockchip: add reset for CPU nodes
ARM: dts: rockchip: add intmem node for rk3288 smp support
ARM: dts: rockchip: add pmu references to cpus nodes
ARM: dts: rockchip: add serial aliases for rk3066 and rk3188
ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "Allwinner Device Tree Changes for 3.19" from Maxime Ripard:
A lot of things happened during that merge window, but mostly:
- Preliminary Support for the A80
- New Boards Support
+ Mele M3
+ Banana Pi
+ Optimus
+ OLinuXino Lime2
- Device Tree Relicensing to GPLv2/X11 dual license
* tag 'sunxi-dt-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (52 commits)
ARM: dts: sun6i: Add ethernet support to M9 board
ARM: sun6i: DT: Add PLL6 multiple outputs
ARM: dts: sun6i: Add support for the status led
ARM: dts: sun6i: Add EHCI support for the M9 board
ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator
ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG VBUS
ARM: dts: sun7i: Cubietruck: override regulator pin
ARM: sun7i: dtsi: add support for usbphy0
ARM: dtsi: sunxi: add common VBUS regulator
ARM: dts: sunxi: Banana Pi: increase startup-delay for the GMAC PHY regulator
ARM: dts: sunxi: Use sun4i-a10-apb1-clk for sun6i/sun8i apb2 clocks.
ARM: dts: sunxi: unify APB1 clock
ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controller
ARM: sun5i: olinuxino: Relicense the device tree under GPLv2/X11
ARM: sun4i: cubieboard: Relicense the device tree under GPLv2/X11
ARM: sun7i: pcduino3: Relicense the device tree under GPLv2/X11
ARM: sun4i: pcduino: Relicense the device tree under GPLv2/X11
ARM: sun7i: olinuxino lime: Relicense the device tree under GPLv2/X11
ARM: dts: sun9i: Enable uart4 for A80 Optimus board
ARM: dts: sun9i: Add uart4 pinmux setting for A80 SoC
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "ARM: meson: DTS related changes" from Carlo Caione:
here is the pull request for the DT related changes for the 3.19.
It's mainly the work done by Beniamino for the preliminary support of
the Amlogic Meson8 SoC, the support for L2 cache and the I2C
controller.
Please note that the support for the Tronsmart S89 Elite TV box has not
been included since the Meson8 development will be done now on a
different dev board kindly provided by Amlogic.
* tag 'v3.19-meson-dts' of https://github.com/carlocaione/linux-meson:
ARM: dts: meson: add I2C controller nodes
ARM: meson: DTS: enable L2 cache
ARM: dts: add dtsi for Amlogic Meson8 SoCs
DTS: meson: Add forgotten compatible in board DTS
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "STi DT updates for v3.19, round 2" from Maxime Coquelin:
Highlights:
-----------
- Refactor STiH407 SoC and board to add STiH410 SoC support
- Add USB support to STiH416 SoC
* tag 'sti-dt-for-v3.19-2' of git://git.stlinux.com/devel/kernel/linux-sti:
ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000
ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs
ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support.
ARM: STi: DT: STih407: Abstract common dt nodes into shared files.
ARM: STi: DT: STiH410: Add pinctl config for usb controllers.
ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks
ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers.
ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy
ARM: STi: DT: STiH416: Add pinctl setup for usb controllers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "ARM SoC Integrator updates for v3.19" from Linus Walleij:
Integrator updates for the v3.19 merge cycle on
top of the multiplatform patches, this moves out
some drivers and reduced the amount of code carried
in arch/arm/mach-integrator.
- Move the Integrator/AP timer to drivers/clocksource
- Move the restart functionality to the device tree,
patches to enable restart for the Integrator have
been merged to the reset tree (orthogonal)
- Move debug LEDs to device tree (using the syscon
LED driver merged for v3.18)
- Move core module LEDs to device tree (using the
syscon LED driver merged for v3.18)
- Move the SoC driver (chip ID etc) to
drivers/soc/versatile/soc-integrator.c
* tag 'integrator-v3.19-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
soc: move SoC driver for the ARM Integrator
ARM: integrator: move core module LED to device tree
ARM: integrator: move debug LEDs to syscon LED driver
ARM: integrator: move restart to the device tree
ARM: integrator: move AP timer to clocksource
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds critical trip points to the Jetson TK1 device tree.
The device will do a controlled shutdown when either the CPU, GPU
or MEM thermal zone reaches 101 degrees Celsius.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This adds the soctherm thermal sensing and management unit to the
Tegra124 device tree along with the four thermal zones corresponding
to the four thermal sensors provided by soctherm.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
