The specs refer to pin pairs. Start moving towards using pin rather than
port all around to avoid confusion. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When pixel clock less than 148.5MHz, make sloopboost=2 tklvl=20
cklvl=13 increase rasing/falling time and increase data & clock
voltage driver.
When pixel clock less than 74.25MHz, make sloopboost=0 tklvl=19
cklvl=18, increase data and clock voltage driver.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Because of iMX6 & Rockchip have differnet mpll config parameter,
the VLEVCTRL parameter would be different. In this case we should
separate VLEVCTRL setting from the common dw_hdmi driver, config
this parameter in platform driver(dw_hdmi-imx and dw_hdmi-rockchip)
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The legacy and LRC code paths have an almost identical procedure for waiting for
space in the ring buffer. They both search for a request in the free list that
will advance the tail to a point where sufficient space is available. They then
wait for that request, retire it and recalculate the free space value.
Unfortunately, a bug in the LRC side meant that the resulting free space might
not be as large as expected and indeed, might not be sufficient. This is because
it was testing against the value of request->tail not request->postfix. Whereas,
when a request is retired, ringbuf->tail is updated to req->postfix not
req->tail.
Another significant difference between the two is that the LRC one did not trust
the wait for request to work! It redid the is there enough space available test
and would fail the call if insufficient. Whereas, the legacy version just said
'return 0' - it assumed the preceeding code works. This difference meant that
the LRC version still worked even with the bug - it just fell back to the
polling wait path.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The request allocation code is largely duplicated between legacy mode and
execlist mode. The actual difference between the two versions of the code is
pretty minimal.
This patch moves the common code out into a separate function. This is then
called by the execution specific version prior to setting up the one different
value.
For: VIZ-5190
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The only usage of intel_logical_ring_begin() is within intel_lrc.c so it can be
made static. To avoid a forward declaration at the top of the file, it and bunch
of other functions have been shuffled upwards.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The submission portion of the execbuffer code path was abstracted into a
function pointer indirection as part of the legacy vs execlist work. The two
implementation functions are called 'i915_gem_ringbuffer_submission' and
'intel_execlists_submission' but the pointer was called 'do_execbuf'. There is
already a 'i915_gem_do_execbuffer' function (which is what calls the pointer
indirection). The name of the pointer is therefore considered to be backwards
and should be changed.
This patch renames it to 'execbuf_submit' which is hopefully a bit clearer.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Final drm-misc pull for 4.0, just various things all over, including a few
more important atomic fixes. btw I didn't pick up the vmwgfx patch from
Ville's series, but one patch has one hunk touching vmwgfx and
Thomas/Jakob didn't get around to ack it. I figured it's simple enough to
be ok though.
* tag 'topic/drm-misc-2015-03-31' of git://anongit.freedesktop.org/drm-intel:
drm: line wrap DRM_IOCTL_DEF* macros
drm/atomic: Don't try to free a NULL state
drm/atomic: Clear crtcs, connectors and planes when clearing state
drm: Rewrite drm_ioctl_flags() to resemble the new drm_ioctl() code
drm: Use max() to make the ioctl alloc size code cleaner
drm: Simplify core vs. drv ioctl handling
drm: Drop ioctl->cmd_drv
drm: Fix DRM_IOCTL_DEF_DRV()
drm/atomic-helpers: Properly avoid full modeset dance
drm: atomic: Allow setting CRTC active property
drm: atomic: Expose CRTC active property
drm: crtc_helper: Update hwmode before mode_set call
drm: mode: Allow NULL modes for equality check
drm: fb_helper: Simplify exit condition
drm: mode: Fix typo in kerneldoc
drm/dp: Print the number of bytes processed for aux nacks
This backmerges 4.0-rc6 due to the recent fixes in rc5/6
- DP link rate refactoring from Ville
- byt/bsw rps tuning from Chris
- kerneldoc for the shrinker code
- more dynamic ppgtt pte work (Michel, Ben, ...)
- vlv dpll code refactoring to prep fro bxt (Imre)
- refactoring the sprite colorkey code (Ville)
- rotated ggtt view support from Tvrtko
- roll out struct drm_atomic_state to prep for atomic update (Ander)
* tag 'drm-intel-next-2015-03-27-merge' of git://anongit.freedesktop.org/drm-intel: (473 commits)
Linux 4.0-rc6
arm64: juno: Fix misleading name of UART reference clock
drm/i915: Update DRIVER_DATE to 20150327
drm/i915: Skip allocating shadow batch for 0-length batches
drm/i915: Handle error to get connector state when staging config
drm/i915: Compare GGTT view structs instead of types
drm/i915: fix simple_return.cocci warnings
drm/i915: Add module param to test the load detect code
drm/i915: Remove usage of encoder->new_crtc from clock computations
drm/i915: Don't look at staged config crtc when changing DRRS state
drm/i915: Convert intel_pipe_will_have_type() to using atomic state
drm/i915: Pass an atomic state to modeset_global_resources() functions
drm/i915: Add dynamic page trace events
drm/i915: Finish gen6/7 dynamic page table allocation
drm/i915: Remove unnecessary gen6_ppgtt_unmap_pages
drm/i915: Fix i915_dma_map_single positive error code
drm/i915: Prevent out of range pt in gen6_for_each_pde
drm/i915: fix definition of the DRM_IOCTL_I915_GET_SPRITE_COLORKEY ioctl
drm/i915: Rip out GET_SPRITE_COLORKEY ioctl
watchdog: imgpdc: Fix default heartbeat
...
Unify the HSW/BDW/SKL cdclk extraction code to conform to the same
.get_display_clock_speed() mold that all the other platforms
use.
v2: Update due to SKL code getting added
v3: Rebase on top of -nightly (introduction of intel_audio.c) (Mika Kahola)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Add v3 note as suggested by Damien.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we are "extracting" the cdclk frequency on ILK-IVB we
can also simplify ilk_get_aux_clock_divider() to calculate the
divider based on cdclk instead of hardcoding the values.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't currently have cdclk extraction code for 965g,snb,ivb.
Let's assume 400 MHz until we know better. That seems to match hints
in various vague documents. Whether that's good enough is not
entirely clear.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based on the BIOS DP A AUX 2x clock divider the cdclk frequency
on ILK is 450Mhz. At least that holds on my ILK and it matches
how we program the divider.
Supposedly cdclk is 400MHz on SNB and IVB, again based on the AUX 2x
clock divider. Note that I don't have a SNB or IVB machine with
eDP so I couldn't verify what the BIOS used, so this notion is
purely based on our current code,
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fill out the lower three digits for gen2 and gen3 cdclk frqeuncy. It's
not clear if these are accurate frquencies or just in the ballpark, but
without docs this is the best we can do.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ns2501 requires the DVO 2x clock before it will respond to i2c access,
so make sure the clock is enabled when we try to initialize the encoder.
Fixes the display getting lost on module reload on my Fujitsu/Siemens
Lifebook S6010.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After the GPU has wedged we can't turn on the overlay anymore. Only mark
it as active if we succeed in allocating ring space. This prevents a
WARN (previous;y a BUG) during driver unload if we attempted to use the
overlay after the GPU had already wedged.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BUG is bad, just use WARN.
Also drop one BUG(!overlay) since we'd oops anyway when dereferencing
it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On CHV, PUNIT team confirmed that 'VLV_GFX_CLK_STATUS_BIT' is not a
sticky bit and it will always be set. So ignore Check for previous
Gfx force off during suspend and allow the force clk as part S0ix
Sequence
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch makes the fsl,data-width and fsl,data-mapping device tree
properties optional if a panel is connected to the ldb output port
via the of_graph bindings. The data mapping is determined from the
display_info.bus_format field provided by the panel.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The LDB driver changes the attached display interface's input clock mux
to the LDB_DI clock reference. Change it back again when disabling the
LVDS display. Changing back to the PLL5 for example allows to configure
the same DI for HDMI output later.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch allows to optionally attach the lvds-channel to a panel
supported by a drm_panel driver using of-graph bindings, instead of
supplying the modes via display-timings in the device tree.
This depends on of_graph_get_port_by_id and uses the OF graph to
link the optional DRM panel to the LDB lvds-channel. The output
port number is 1 on devices without the 4-port input multiplexer
(i.MX5) and 4 on devices with the mux (i.MX6).
Before:
ldb {
...
lvds-channel@0 {
...
display-timings {
native-timing = <&timing1>;
timing1: etm0700g0dh6 {
hactive = <800>;
vactive = <480>;
clock-frequency = <33260000>;
hsync-len = <128>;
hback-porch = <88>;
hfront-porch = <40>;
vsync-len = <2>;
vback-porch = <33>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
...
};
};
...
};
};
After:
ldb {
...
lvds-channel@0 {
...
port@4 {
reg = <4>;
lvds_out: endpoint {
remote_endpoint = <&panel_in>;
};
};
};
};
panel {
compatible = "edt,etm0700g0dh6", "simple-panel";
...
port {
panel_in: endpoint {
remote-endpoint = <&lvds_out>;
};
};
};
[Fixed build error due to missing select on DRM_PANEL --rmk]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The value for downsizing 8:1 is marked as reserved in the technical reference
manual and the documentation states downsizing capability up to 4:1 only.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The DI pixel clock divider bit field is only 8 bits wide for the
integer part, so limit the divider to the 1...255 interval before
deciding whether the internal clock can be used and before writing
to the register.
Reported-by: Felix Mellmann <felix.mellmann@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt,
and pixfmt variables to a common name "bus_format" wherever they describe the
pixel format on the bus between display controller and encoder hardware.
At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
imx-drm internally misused the V4L2_PIX_FMT constants, which are supposed to
describe the pixel format of frame buffers in memory, to describe the pixel
format on the bus between the display controller and the encoder hardware.
Now that MEDIA_BUS_FMT constants are available to drm drivers, use those
instead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
This patch allows the IPU to divide the 27 MHz input clock from
the TVE by two to obtain the 13.5 MHz pixel clock needed for
NTSC/PAL SD modes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
- Allow amdkfd to work with multiple kgd instances. This is in preparation for
AMD's new open source kernel graphic driver (amdgpu), and for the new
AMD APU, Carrizo.
- Convert timestamping to use 64bit time accessors
- Three other minor changes.
* tag 'drm-amdkfd-next-2015-03-25' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Add multiple kgd support
drm/amdkfd: Convert timestamping to use 64bit time accessors
drm/amdkfd: add debug prints for process teardown
drm/amdkfd: Remove unused field from struct qcm_process_device
drm/amdkfd: rename fence_wait_timeout
Patch derived from one from Yakir Yang. Yakir Yang says:
For Designerware HDMI, the following write sequence is recommended:
1. aud_n3 (set bit ncts_atomic_write if desired)
2. aud_cts3 (set CTS_manual and CTS value if desired/enabled)
3. aud_cts2 (required in CTS_manual)
4. aud_cts1 (required in CTS_manual)
5. aud_n3 (bit ncts_atomic_write with same value as in step 1.)
6. aud_n2
7. aud_n1
However, avoid the ncts_atomic_write_bit and CTS_manual settings in this
patch, both of which are marked reserved in the iMX6 documentation. All
iMX6 code in the wild seems to want CTS_manual cleared.
Having requested clarification from FSL, it appears that neither of
these bits are implemented in their version of the IP.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The HDMI n/cts settings need to be updated whenever the audio sample
rate or the video pixel clock changes. This needs to be protected
against concurrency as there is no synchronisation between these two
operations. Introduce a mutex (called audio_mutex) to protect against
two threads trying to update the video clock rate and pixel clock
simultaneously.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Make use of the DRM HDMI AVI infoframe helper to construct the AVI
infoframe, rather than coding this up ourselves. This allows DRM
to supply proper aspect ratio information derived from the DRM
display mode structure.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Since
commit 17cabf571e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jan 14 11:20:57 2015 +0000
drm/i915: Trim the command parser allocations
we may then try to allocate a zero-sized object and attempt to extract
its pages. Understandably this fails.
Note that the real offender seems to be
commit b9ffd80ed6
Author: Brad Volkin <bradley.d.volkin@intel.com>
Date: Thu Dec 11 12:13:10 2014 -0800
drm/i915: Use batch length instead of object size in command parser
Testcase: igt/gem_exec_nop #ivb,byt,hsw
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[cherry picked from commit 743e78c1d7
from drm-intel-next because 4.0 seems to be affected by this too,
despite that the obvious culprit is definitely not in 4.0. Whatever,
if fixes a bug.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
BSpec recommends to keep the main link state consistent
between the source and the sink. As per that, update
the main link state in sink DPCD register to 'active',
for Valleyview based platforms.
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Makes that code atomic ready.
v2: Acquire crtc_state for the "other" pipe only when needed. (Daniel)
v3: Really only acquire the other state if necessary. (Daniel)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge Linux 4.0-rc6 because conflicts are (again) getting out of
hand. To make sure we don't lose any bugfixes from the 4.0-rc5-rc6
flurry of patches we've applied them all to -next too.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
Always take the version from -next, we've already handled all
conflicts with explicit cherrypicking.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Users of the atomic state assume that if the pointer to a crtc, plane or
connector is not NULL in the respective object vector, than the state
for that object in *_states vector also won't be NULL. That assumption
was broken by drm_atomic_state_clear(), which would clear the state
pointer but leave the pointer to the object still set.
This fixes a NULL pointer dereference in i915 caused by the use of
drm_atomic_state_clear().
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the same logic when checking for valid ioctl range in
drm_ioctl_flags() that is used in drm_ioctl() to avoid
confusion.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use max() to make the code to determine the allocation size for
the ioctl data easier to read.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that cmd_drv is gone the handling for core and driver ioctls is
mostly identical, so eliminate the duplication. Also take the
opportunity to simplify the range checks to be less cluttered.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
