It is rather pointless to test the value of transport->inet after
calling xs_reset_transport(), since it will always be zero, and
so we will never see any exponential back off behaviour.
Also don't force early connections for SOFTCONN tasks. If the server
disconnects us, we should respect the exponential backoff.
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
- Switch back to using list_for_each_entry(). Fixes an incorrect test
for list NULL termination.
- Do not assume that lists are sorted.
- Finally, consider an existing entry to match if it consists of a subset
of the addresses in the new entry.
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should ensure that we always set the pgio_header's error field
if a READ or WRITE RPC call returns an error. The current code depends
on 'hdr->good_bytes' always being initialised to a large value, which
is not always done correctly by callers.
When this happens, applications may end up missing important errors.
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
DAPM core already creates widgets for DAIs. It is not necessary
to declare them by SND_SOC_DAPM_AIF_IN/SND_SOC_DAPM_AIF_OUT.
Furthermore, original codes use backend DAI's stream name to be the AIF
widget name. It causes the same widget to be created twice, and after
commit 92fa124267 ("ASoC: dapm: Add new widgets to the end of the
widget list") the first created widget (by snd_soc_dapm_new_controls)
is used, not the 2nd created one (by snd_soc_dapm_new_dai_widgets),
so audio path is broken.
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A zero length payload means that no TLV (Type Length Value) data has
been passed. Prior to this patch a non-existing TLV could be sanity
checked with TLV_OK() resulting in random behavior where a user
sending an empty message occasionally got a incorrect "operation not
supported" message back.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Management firmware tells driver in case bandwidth configuration for
a specific function exists, but [regretably] the same field has different
meanings depending on the multi-function mode - it can either be
a percentile value or an actual speed.
For newer multi-function modes current logic is incorrect -
driver understands values as actual speeds instead of percentages,
causing the resulting chip configuration to be incorrect.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch increments privatecnt value and set DMA_PRIVATE in device
caps in dma_request_slave_channel() function. This is needed to keep
privatecnt increment/decrement balance.
As function dma_release_channel() decrements privatecnt counter, we need
to increment it when channel is requested. Otherwise privatecnt drops
into negatives after few dma_release_channel() calls.
Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Chanwoo writes:
Update extcon for v4.3
This patchset include the function update of extcon drivers without critical
update and fix minor issue of extcon drivers.
Detailed description for patchset:
1. Update the extcon drivers:
- Update the logic of microphone detection for extcon-arizona driver
- Support GPIO based USB ID detection of extcon-palmas driver
2. Fix minor issues:
- Clean code and remove the opitonal print_state() function pointer from extcon
core driver
- Clear interrupt bit state before requesting irq on extcon-max778433 driver
- Fix signedness bugs of extcon core driver
Johan writes:
USB-serial updates for v4.3-rc1
Here's a fix for a long-standing issue with the pl2303 divisor
calculations that affects some non-standard baudrates that were enabled
in v3.18.
Adding support for newer Edgeport devices and firmware required changes
to the io_ti driver and also exposed some issues with the driver's
current firmware handling.
Included is also a URL comment-typo fix.
Signed-off-by: Johan Hovold <johan@kernel.org>
There are some missing dependencies at the DT, as it looks for
an I2C bus named "ssc2", but this is not defined.
Probably, it misses some dependencies from some other tree.
For now, revert this patch, to avoid build breakages.
This reverts commit 5d8877b6ae.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- a regression caused by the conversion of IPsec ESP to the new AEAD
interface: ESN with authencesn no longer works because it relied on
the AD input SG list having a specific layout which is no longer
the case. In linux-next authencesn is fixed properly and no longer
assumes anything about the SG list format. While for this release
a minimal fix is applied to authencesn so that it works with the
new linear layout.
- fix memory corruption caused by bogus index in the caam hash code.
- fix powerpc nx SHA hashing which could cause module load failures
if module signature verification is enabled"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix memory corruption in ahash_final_ctx
crypto: nx - respect sg limit bounds when building sg lists for SHA
crypto: authencesn - Fix breakage with new ESP code
WMI 10.4 uses the same command interface as QCA988X for addba/delba
debug wmi commands. Fill wmi_10_4_ops table with the functions used
for QCA988X for these commands.
With this change, the following debugfs entries can be used to
configure the aggregation mode and to send addba request,
addba response and delba respectively in manual aggregation mode
for QCA99X0 chip.
/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/XX:XX:XX:XX:XX:XX/aggr_mode
/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/XX:XX:XX:XX:XX:XX/addba
/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/XX:XX:XX:XX:XX:XX/addba_resp
/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/XX:XX:XX:XX:XX:XX/delba
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Header format of 10.4 firmware phyerr event is not alligned
with pre 10.4 firmware. Introduce new wmi handlers to parse
10.4 firmware specific phyerror event header.
With changes covered in this patch, radar detection works on
qca9x0 hw 2.0 which uses 10.4 firmware.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Existing phyerr event handlers directly uses phyerr header format
(ie, struct wmi_phyerr and struct wmi_phyerr_event) in the code
exactly on how firmware packs it. This is the problem in 10.4 fw
specific phyerr event handling where it uses different phyerror
header format. Before adding 10.4 specific handler, little bit of
refactor is done in existing phyerr handlers.
Two new abstracted structures (struct wmi_phyerr_ev_hdr_arg and
struct wmi_phyerr_ev_arg) are introduced to remove dependency of using
firmware specific header format in the code. So that firmware specific
phyerror handlers can populate values to abstracted structures and
the following code can use abstracted struct for further operation.
.pull_phyerr_hdr is added newly to pull common phyerr header info
like tsf, buf_len, number of phyerr packed. Existing .pull_phyerr
handler is changed and called to parse every sub phyerrs in the event.
Validated these refactoring on qca988x hw2.0 using fw 10.2.4 version.
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Return type of wait_for_completion_timeout is unsigned long not int.
As remain is exclusively used for wait_for_completion_timeout here its
type is simply changed to unsigned long.
API conformance testing for completions with coccinelle spatches are being
used to locate API usage inconsistencies:
./drivers/net/wireless/ath/wil6210/wmi.c:827
int return assigned to unsigned long
Patch was compile tested with x86_64_defconfig + CONFIG_ATH_CARDS=m,
CONFIG_WIL6210=m
Patch is against 4.1-rc3 (localversion-next is -next-20150514)
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Apparently it's not safe to install both pairwise
and groupwise keys on AP vdevs as it can cause
traffic to stop working in some multi-vif
(WPA+WEP) cases.
Fixes: ce90b27128 ("ath10k: fix multiple key static wep with ibss")
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Previously, period_ns and duty_ns were only used to determine the
ratio of ON and OFF time, the default frequency of 200 Hz was never
changed.
The PCA9685 however is capable of changing the PWM output frequency,
which is expected when changing the period.
This patch configures the prescaler accordingly, using the formula
and notes provided in the PCA9685 datasheet.
Bounds checking for the minimum and maximum frequencies, last updated
in revision v.4 of said datasheet, is also added.
The prescaler is only touched if the period changed, because we have to
put the chip into sleep mode to unlock the prescale register.
If it is changed, the PWM output frequency changes for all outputs,
because there is one prescaler per chip. This is documented in the
PCA9685 datasheet and in the comments.
If the duty cycle is not changed at the same time as the period, then
we restart the PWM output using the duty cycle to period ratio from
before the period change.
When using LEDs for example, previously set brightness levels stay the
same when the frequency changes.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Problems:
- When duty_ns == period_ns, the full OFF bit was not cleared and the
PWM output of the PCA9685 stayed off.
- When duty_ns == period_ns and the catch-all channel was used, the
ALL_LED_OFF_L register was not cleared.
- The full ON bit was not cleared when setting the OFF time, therefore
the exact OFF time was ignored when setting a duty_ns < period_ns
Solution: Clear both OFF registers when setting full ON and clear the
full ON bit when changing the OFF registers.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The flags variable is used as u32 variable. This patch changes the type
to be u32.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch renames functions so that it is clear what the function does.
Otherwise it is not directly understandable what for example 'do_it' means.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add some debugfs files that help to understand the internal state of
NBD. This exports the different sizes, flags, tasks and so on.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch uses nbd->task_recv to determine the value of the previously
used variable 'pid' for sysfs.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This message was a warning without a reason. This patch moves it into
nbd_clear_que and transforms it to a debug message.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of a variable 'harderror' we can simply try to correctly
propagate errors to the userspace.
This patch removes the harderror variable and passes errors through
error pointers and nbd_do_it back to the userspace.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch restructures sock_shutdown to avoid having the main code path
in an if block.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Move the conditional lock from sock_shutdown into the surrounding code.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
At the moment the nbd timeout just detects hanging tcp operations. This
is not enough to detect a hanging or bad connection as expected of a
timeout.
This patch redesigns the timeout detection to include some more cases.
The timeout is now in relation to replies from the server. If the server
does not send replies within the timeout the connection will be shut
down.
The patch adds a continous timer 'timeout_timer' that is setup in one of
two cases:
- The request list is empty and we are sending the first request out to
the server. We want to have a reply within the given timeout,
otherwise we consider the connection to be dead.
- A server response was received. This means the server is still
communicating with us. The timer is reset to the timeout value.
The timer is not stopped if the list becomes empty. It will just trigger
a timeout which will directly leave the handling routine again as the
request list is empty.
The whole patch does not use any additional explicit locking. The
list_empty() calls are safe to be used concurrently. The timer is locked
internally as we just use mod_timer and del_timer_sync().
The patch is based on the idea of Michal Belczyk with a previous
different implementation.
Cc: Michal Belczyk <belczyk@bsd.krakow.pl>
Cc: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Update the driver so that settings are applied in accordance with the
most recent version of the hardware spec. The revised sequence clears
the trigger bit, waits 400ns, writes settings, sets the trigger bit,
and waits another 400ns. This corrects an issue where occasionally a
requested change was not properly reflected in the PWM output.
Reviewed-by: Arun Ramamurthy <arunrama@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Reviewed-by: Tim Kryger <tim.kryger@gmail.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The rd sg lists are never passed to hardware, so use S/G chaining
unonditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
There are a couple of uses of struct scatterlist that never go to
the dma_map_sg() helper and thus don't care about ARCH_HAS_SG_CHAIN
which indicates that we can map chained S/G list.
The most important one is the crypto code, which currently has
to open code a few helpers to always allow chaining. This patch
removes a few #ifdef ARCH_HAS_SG_CHAIN statements so that we can
switch the crypto code to these common helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add support for Intel Processor Trace.
Intel PT support fits within the new auxtrace infrastructure. Recording
is supporting by identifying the Intel PT PMU, parsing options and
setting up events.
Decoding is supported by queuing up trace data by cpu or thread and then
decoding synchronously delivering synthesized event samples into the
session processing for tools to consume.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding an Intel Processor Trace.
Intel PT trace data must be 'decoded' which involves walking the object
code and matching the trace data packets.
The decoder requests a buffer of binary data via a get_trace()
call-back, which it decodes using instruction information which it gets
via another call-back walk_insn().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding instructions for Intel Processor Trace. The
kernel x86 instruction decoder is copied for this.
This essentially provides intel_pt_get_insn() which takes a binary
buffer, uses the kernel's x86 instruction decoder to get details of the
instruction and then categorizes it for consumption by an Intel PT
decoder.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439450095-30122-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the following 32-bit compilation errors:
util/annotate.c: In function ‘addr_map_symbol__account_cycles’:
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘u64’ [-Werror=format=]
pr_debug2("BB with bad start: addr %lx start %lx sym %lx saddr %lx\n",
^
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ [-Werror=format=]
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘u64’ [-Werror=format=]
These were introduced by the patch:
"perf report: Add infrastructure for a cycles histogram"
Also change the 'saddr' variable from 'unsigned long' to 'u64'
noting that theoretically we could be processing data captured
on a 64-bit machine but processing it on a 32-bit machine.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: d4957633bf ("perf report: Add infrastructure for a cycles histogram")
Link: http://lkml.kernel.org/r/1439536294-18241-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
