For BCM2836, we want to chain into this IRQ chip from the root
controller, and for chaining we need to do something else instead of
handle_IRQ() once we have decoded the IRQ.
Note that this changes the behavior a little bit: Previously for a
non-shortcut IRQ, we'd loop reading and handling the second level IRQ
status until it was cleared before returning to the loop reading the
top level IRQ status (Note that the top level bit is just an OR of the
low level bits). For the expected case of just one interrupt to be
handled, this was an extra register read, so we're down from 4 to 3
reads.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: Lee Jones <lee@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1438902033-31477-2-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Nikolay Aleksandrov says:
====================
vrf: cleanups part 2
This is the next part of vrf cleanups, patch 1 drops the SLAB_PANIC
when creating kmem cache since it's handled, patch 02 removes a slave
duplicate check which is already done by the lower/upper code, patch 3
moves the ndo_add_slave code around a bit so we can drop an error
label and patch 4 drops the master device checks which are unnecessary
because the ops are taken from the master device itself so it can't be
different.
====================
Acked-by: David Ahern <dsa@cumulusnetworks.com>
When ndo_add|del_slave ops are used, they're taken from the respective
master device's netdev ops, so if the master device is a VRF only then
the VRF ops will get called thus no need to check the type of the
master.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can simplify do_vrf_add_slave by moving vrf_insert_slave in the end
of the enslaving and thus eliminate an error goto label. It always
succeeds and isn't needed before that anyway.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The upper/lower functions already check for duplicate slaves so no need
to do it again.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's pointless to panic on cache create failure when that case is handled
and even more so since it's not a kernel-wide fatal problem so don't
panic.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A proprietary vendor command may send back useful data to the user
application.
For example, the field level applied on the NFC router antenna.
Still based on net/wireless/nl80211.c implementation,
add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in
order to send back over netlink data generated by a proprietary
command.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Currently whenever a packet different from ETH_P_IP is sent through the
VRF device it is leaked so plug the leaks and properly drop these
packets.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Out of bounds array access in 802.11 minstrel code, from Adrien
Schildknecht.
2) Don't use skb_get() in IGMP/MLD code paths, as this makes
pskb_may_pull() BUG. From Linus Luessing.
3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft.
4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet.
5) Fix ppp device deregistration wrt. netns deletion, from Guillaume
Nault.
6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai
Lau.
7) Fix memory leak in batman-adv code, from Sven Eckelmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
batman-adv: Fix memory leak on tt add with invalid vlan
net: phy: fix semicolon.cocci warnings
net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
be2net: avoid vxlan offloading on multichannel configs
ipv6: Fix a potential deadlock when creating pcpu rt
ipv6: Add rt6_make_pcpu_route()
ipv6: Remove un-used argument from ip6_dst_alloc()
net: phy: workaround for buggy cable detection by LAN8700 after cable plugging
net: ethernet: micrel: fix an error code
ppp: fix device unregistration upon netns deletion
net: phy: fix PHY_RUNNING in phy_state_machine
Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN"
inet: fix potential deadlock in reqsk_queue_unlink()
gianfar: Restore link state settings after MAC reset
ipv4: off-by-one in continuation handling in /proc/net/route
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code
mac80211: fix invalid read in minstrel_sort_best_tp_rates()
Add driver for Samsung S3FWRN5 NFC controller.
S3FWRN5 is using NCI protocol and I2C communication interface.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Some drivers needs to have ability to reinit NCI core, for example
after updating firmware in setup() of post_setup() callback. This
patch makes nci_core_reset() and nci_core_init() functions public,
to make it possible.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Some drivers require non-standard configuration after NCI_CORE_INIT
request, because they need to know ndev->manufact_specific_info or
ndev->manufact_id. This patch adds post_setup handler allowing to do
such custom configuration.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Pull xen build fix from David Vrabel:
"Fix i386 build with an (uncommon) configuration"
* tag 'for-linus-4.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC
Pull sound fixes from Takashi Iwai:
"Here are a small collecton of sound fix patches.
The most significant one is the disablement of newly introduced
topology API. Its ABI couldn't be stabilized enough, so we decided to
delay for 4.3 in the end. Other than that, all oneliner fixes: a
USB-audio runtime PM fix and a couple of HD-audio quirks"
* tag 'sound-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add dock support for Thinkpad W541 (17aa:2211)
ALSA: usb-audio: Fix runtime PM unbalance
ASoC: topology: Disable use from userspace
ASoC: topology: Add Kconfig option for topology
ALSA: hda - Fix the white noise on Dell laptop
GPIOF_IN flag was lost in:
Commit 633a21d80b4a("input: gpio_keys_polled: Add support for GPIO
descriptors").
Without this flag, legacy code path (for non-descriptor GPIO declarations)
would configure GPIO as output (0 meaning GPIOF_DIR_OUT | GPIOF_INIT_LOW).
Cc: stable@vger.kernel.org
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We want to ensure that the stopwatches for the busy timer and the
aggregate timer are consistent. This means that they need to use
the same start/stop times.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull SCSI target fixes from Nicholas Bellinger:
"This contains a v4.2-rc specific RCU module unload regression bug-fix,
a long-standing iscsi-target bug-fix for duplicate target_xfer_tags
during NOP processing from Alexei, and two more small REPORT_LUNs
emulation related patches to make Solaris FC host LUN scanning happy
from Roland.
There is also one patch not included that allows target-core to limit
the number of fabric driver SGLs per I/O request using residuals, that
is currently required as a work-around for FC hosts which don't honor
EVPD block-limits settings. At this point, it will most likely become
for-next material"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix handling of small allocation lengths in REPORT LUNS
target: REPORT LUNS should return LUN 0 even for dynamic ACLs
target/iscsi: Fix double free of a TUR followed by a solicited NOPOUT
target: Perform RCU callback barrier before backend/fabric unload
Pull thermal fixes from Eduardo Valentin:
"Last minute fixes on the thermal-soc tree. There is a fix of a long
lasting bug in cpu cooling device, thanks for RMK for being pushing
this"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal/cpu_cooling: update policy limits if clipped_freq < policy->max
thermal/cpu_cooling: rename max_freq as clipped_freq in notifier
thermal/cpu_cooling: rename cpufreq_val as clipped_freq
thermal/cpu_cooling: convert 'switch' block to 'if' block in notifier
thermal/cpu_cooling: quit early after updating policy
thermal/cpu_cooling: No need to initialize max_freq to 0
thermal: cpu_cooling: fix lockdep problems in cpu_cooling
thermal: power_allocator: do not use devm* interfaces
Return -ENOTSUPP if map->bus->read is not implemented and we do not use
the cache. This code path would directly use bus->read would run into an
NULL pointer for the read function.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes SPI_CMD_*_OFFSET defines, and uses the BIT(x)
defines instead.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
TX_ENDIAN/RX_ENDIAN bits define whether to reverse the endian
order of the data DMA from/to memory. The endian order should
keep the same with cpu endian.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the annotation for the kaddr pointer returned by direct_access()
so that it is a __pmem pointer. This is consistent with the PMEM driver
and with how this direct_access() pointer is used in the DAX code.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Update the DAX I/O path so that all operations that store data (I/O
writes, zeroing blocks, punching holes, etc.) properly synchronize the
stores to media using the PMEM API. This ensures that the data DAX is
writing is durable on media before the operation completes.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support for two new PMEM APIs, copy_from_iter_pmem() and
clear_pmem(). copy_from_iter_pmem() is used to copy data from an
iterator into a PMEM buffer. clear_pmem() zeros a PMEM memory range.
Both of these new APIs must be explicitly ordered using a wmb_pmem()
function call and are implemented in such a way that the wmb_pmem()
will make the stores to PMEM durable. Because both APIs are unordered
they can be called as needed without introducing any unwanted memory
barriers.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prior to this change x86_64 used the pmem defines in
arch/x86/include/asm/pmem.h, and UM used the default ones at the
top of include/linux/pmem.h. The inclusion or exclusion in linux/pmem.h
was controlled by CONFIG_ARCH_HAS_PMEM_API, but the ones in asm/pmem.h
were controlled by ARCH_HAS_NOCACHE_UACCESS.
Instead, control them both with CONFIG_ARCH_HAS_PMEM_API so that it's
clear that they are related and we don't run into the possibility where
they are both included or excluded. Also remove a bunch of stale
function prototypes meant for UM in asm/pmem.h - these just conflicted
with the inline defaults in linux/pmem.h and gave compile errors.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prior to this change arch_has_wmb_pmem() was only called by
arch_has_pmem_api(). Both arch_has_wmb_pmem() and arch_has_pmem_api()
checked to make sure that CONFIG_ARCH_HAS_PMEM_API was enabled.
Instead, remove the old arch_has_wmb_pmem() wrapper to be rid of one
extra layer of indirection and the redundant CONFIG_ARCH_HAS_PMEM_API
check. Rename __arch_has_wmb_pmem() to arch_has_wmb_pmem() since we no
longer have a wrapper, and just have arch_has_pmem_api() call the
architecture specific arch_has_wmb_pmem() directly.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Move the x86 PMEM API implementation out of asm/cacheflush.h and into
its own header asm/pmem.h. This will allow members of the PMEM API to
be more easily identified on this and other architectures.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If there don't exist dynamic sink or source widget, it will failed to
add dynamic path.
"AIF3ADCDAT" is snd_soc_dapm_aif_out, can't be dynamic sink widget. So
change the audio route to fix this issue.
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
TI QSPI has four 32 bit data regsiters which can be used to transfer 16
bytes of data at once. The register group QSPI_SPI_DATA_REG_3,
QSPI_SPI_DATA_REG_2, QSPI_SPI_DATA_REG_1 and QSPI_SPI_DATA_REG is
treated as a single 128-bit word for shifting data in and out. The bit
at QSPI_SPI_DATA_REG_3[31] position is the first bit to be shifted out
in case of 128 bit transfer mode. Therefore the first byte to be written
to flash should be at QSPI_SPI_DATA_REG_3[31-25] position.
Instead of writing 1 byte at a time when interacting with spi-nor flash,
make use of all the four registers so that 16 bytes can be transferred
in one go. This reduces number of register writes and Word Complete
interrupts for a given transfer message size, thereby increasing the
write performance.
Without this patch the raw flash write speed is ~100KB/s, with this
patch the write speed increases to ~400 kB/s on DRA74 EVM.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no use of snd_soc_unregister_card in remove function
as devm_snd_soc_register_card in probe function automatically
handles it. So, remove use of snd_soc_unregister_card and with
this change remove arndale_audio_remove as it is now redundant.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
of_parse_phandle() returns a device_node pointer with the refcount
incremented. We should dispose of this reference when we're finished.
Drop the reference acquired by of_parse_phandle().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The pcibios_msi_controller() hook was only implemented by ARM, and it sets
pci_bus->msi now, so it doesn't need this hook anymore.
Remove the unused pcibios_msi_controller() hook.
[bhelgaas: changelog, split into separate patch]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
ARM now uses pci_bus->msi to store the msi_controller pointer, so we don't
need to save it in struct pci_sys_data, and we don't need to implement
pcibios_msi_controller() to get it out of pci_sys_data.
Remove msi_controller from struct pci_sys_data and
pcibios_msi_controller().
[bhelgaas: changelog, split into separate patch]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
ARM previously stored the msi_controller pointer in its sysdata, struct
pci_sys_data, and implemented pcibios_msi_controller() to retrieve it.
That made PCI host controller drivers specific to ARM because they had to
put the msi_controller pointer in the ARM-specific pci_sys_data.
There is now a generic mechanism, pci_scan_root_bus_msi(), for giving the
msi_controller pointer to the PCI core. Use this for all ARM systems and
for the DesignWare and Xilinx PCI host controller drivers.
This removes an ARM dependency from the DesignWare, DRA7xx, EXYNOS, i.MX6,
Keystone, Layerscape, SPEAr13xx, and Xilinx drivers.
[bhelgaas: changelog, split into separate patch]
Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Simon Horman <horms@verge.net.au>
CC: Russell King <linux@arm.linux.org.uk>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: Marc Zyngier <marc.zyngier@arm.com>
Add a pci_scan_root_bus_msi() interface so an arch can specify the MSI
controller up front. This removes the need for a pcibios callback to set
the MSI controller later.
This is not exported because I'd like to replace the variety of "scan root
bus" interfaces with a single, more extensible interface that can handle
the MSI controller, domain, pci_ops, resources, etc. I hope this interface
is temporary.
[bhelgaas: changelog, split into separate patch]
Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
In the ARM PCI bios32 layer, failures to dynamically allocate pci_sys_data
for a PCI bus, or a PCI bus scan failure have to be considered serious
warnings but they should not trigger a system panic so that at least the
system is given a chance to be debugged.
This patch replaces the panic statements with WARN() messages to improve
error reporting in the ARM PCI bios32 layer.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Marc Zyngier <marc.zyngier@arm.com>
Make pci-host-generic driver (kernel option PCI_HOST_GENERIC) available on
arm64.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
