[Why]
Underflow is observed when cursor is still enabled when the cursor
rectangle is outside the bounds of it's surface viewport.
[How]
Update parameters used to determine when cursor should be disabled.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The OTG_MASTER_UPDATE_LOCK_SEL is used for GSL and OTGs in the same
group for selecting the OTG_MASTER_UPDATE_LOCK from the same OTG. At
some point, it a check was added to see if OTG is running or not, which
is not necessary, and for this reason, this commit dropped that check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In multiple parts of the DCN code, we write directly to the
OTG_V_TOTAL_* registers in some OPTC functions. Let's avoid it by using
the set_vtotal_min_max.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since different features would need to update cursor registers, However,
they would use different approaches.
To unify varied methods, this refactor is implemented the same update
cursor info method for current varied features.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Max Tseng <Max.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
Large deltas for periodic interrupts could result in the interrupt not
being programmed properly and thus not firing.
[why]
Add proper wrap-around support for calculating VUPDATE and VLINE
positions.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.
[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.
Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Original change 594b237b9a ("drm/amd/display: Add
interface to track PHY state") was implemented by assuming stream's
dpms off is equivalent to PHY power off.
This assumption doesn't hold in following situations:
1. MST multiple stream scenario, where multiple streams are sharing the
same PHY output. Toggle dpms off for one of the stream doesn't power
off the PHY due to the presence of other streams.
2. enable stream failure scenario, where enable stream fails due to
failure of link training. This will cause DPMS off is set to false, while
the actual PHY power state is off in certain cases.
Due to the problematic assumption, the logic will skip disabling
other streams for MST multiple stream scenario, therefore PHY is
not actually powered off.
[how]
1. Rework this refactor by moving PHY state update down to hardware
level, where we update PHY state in place when hardware sequencer
is actually changing the power state of the PHY hardware.
2. Reimplement symclk on TX off workaround in place when we are actually
calling transmitter control to power off PHY in dcn32. Note the workaround is
added due to the lack of proper software interface to set TX while keeping
symclk on. We plan to address this interface problem so we can set TX off
only without affecting symclk in future dcn versions.
Fixes: 594b237b9a ("drm/amd/display: Add interface to track PHY state")
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable_sw_cntl_psr flag is not needed.
For PSR1 and PSR2, we should be passing
dirty rectangle and cursor updates to FW
regardless of enable_sw_cntl_psr flag.
[How]
Remove enable_sw_cntl_psr flag from driver.
Send cursor info and dirty rectagle status to
dmub only in the case of dcn31 and above.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On edp with psr1, we do not provide updates
of the cursor position regularly to firmware
like with PSR2. To send updates regularly,
the flag enable_sw_cntl_psr has to equal 1,
but cursor update should be provided
regularly to FW regardless of that flag.
[How]
Ensure that we always send cursor updates to
firmware when PSR version equals 1.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DAL driver may transmit the wrong cursor position to PSRSU
DMUB driver when there are multiple planes.
[How]
Currently the driver apply the HW cursor on the top plane. So we
should only transmit the cursor position on the top plane to
PSRSU DMUB driver.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
RV2 do not change pipe split policy in the
minimal pipe split transition state.
This will unblock mode support on some
parts that limit to DPM0 for power reason.
[How]
Do not change pipe split policy in the
minimal pipe split transition state to
allow 4k multi display configs to be
supported at DPM0.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The timing programming inside DCN is far from trivial, it has multiple
parameters associated with that, and the lack of documentation does not
help comprehend this already complicated topic. This commit tries to
improve this situation by expanding the documentation of dc_crtc_timing
and the VTG program function.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green
point failures in HDR10 DTN tests. The re-implementation of ARGB16161616
was to fix this however it did not actually fix this issue but a side effect of the
issue.
[HOW]
Change ARGB16161616 pixel format to 26.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases MPC tree bottom pipe ends up point to itself. This causes
iterating from top to bottom to hang the system in an infinite loop.
[How]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enabling stream with tg lock makes config settings
pending causing the garbage until tg unlock.
[How]
Keep the original lock mechanism
The driver doesn't lock tg if plane_state is null.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In some cases MPC tree bottom pipe ends up point to itself. This causes
iterating from top to bottom to hang the system in an infinite loop.
[how]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable regval from the function enc1_update_generic_info_packet
and the variables dynamic_range_rgb and dynamic_range_ycbcr from the
function enc1_stream_encoder_dp_set_stream_attribute are not currently
used.
This was pointed by clang with the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:62:11:
warning: variable 'regval' set but not used [-Wunused-but-set-variable]
uint32_t regval;
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:262:10:
warning: variable 'dynamic_range_rgb' set but not used [-Wunused-but-set-variable]
uint8_t dynamic_range_rgb = 0; /*full range*/
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:263:10:
warning: variable 'dynamic_range_ycbcr' set but not used [-Wunused-but-set-variable]
uint8_t dynamic_range_ycbcr = 1; /*bt709*/
^
3 warnings generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ABGR16161616 colour format was added to dcn10/20/30, and set
any ARGB16161616 to the same value as it (26). As such, the
HDR10 Green Point y value was too far off of the EDID stated
value for DisplayPort.
[How]
Added back the pixel format as 22 for ARGB16161616 for
dcn10/20/30.
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Exit SubVP if MPO is in use since SubVP + MPO together is not supported.
- Don't add SubVP at validation time if we see MPO is in use
Issues fixed in the SubVP / MPO transition:
1. Enable phantom pipes in post unlock function to prevent underflow
when an active pipe is being transitioned to be a phantom pipe (VTG
updates take place right away). Also must wait for VUPDATE of the main
pipe to complete first
2. Don't wait for MPCC idle when transitioning a phantom pipe to an
actual pipe. MPCC_STATUS is never asserted due to OTG being off for
phantom pipes
3. When transitioning an active pipe to phantom, program DET right away
(same as disabling the pipe) or the DET update will only take when
the phantom pipe is enabled which can cause DET allocation errors.
4. For K1/K2 programming of phantom pipes, use same settings as the
main pipe. Also don't program K1 / K2 = 0xF ever since the field is only
1 / 2 bits wide.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
- Currently there is no support for HF-VSIF
- The current support of VSIF is limited to H14b infoframe
[How]
- refactor VSIF
- Added new builder for HF-VSIF
- Added the HF-VSIF packet to DisplayTarget
- Updates DC to apply HF-VSIF updates when updating streams
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Ahmad Othman <ahmad.othman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Memory clock switching has great potential for power savings.
[HOW]
The driver code was modified to notify the DMCUB firmware that it should
stretch the vertical blank of frames when a memory clock switch is about
to start so that no blackouts happen on the screen due to unavailability
of the frame buffer.
The driver logic to determine when such firmware assisted strategy can
be initiated is also implemented and consists on checking prerequisites
of the feature.
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Felipe Clark <felipe.clark@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To involve the cursor position into dirty rectangle calculation.
[how]
- separate plane and cursor update by different DMUB command
- send the cursor information while cursor updating, when updating
cursor position/attribute, store cursor pos/attr to hubp, and
notify dmub FW to exit psr before program cursor registers
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revised validation logic when marking for seamless boot. Init resources
accordingly when Pre-OS has ODM enabled. Reset ODM when transitioning
Pre-OS odm to Post-OS non-odm to avoid corruption. Apply logic to set
odm accordingly upon commit.
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
New dividers in DCCG need to be programmed depending
on encoder/stream type since pixels per clock in
OTG/DIO is different
DIO also needs additional programming depending on
pixels per clock
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
[Description]
Add USBC connector ID to align with new VBIOS parsing.
Add seperate DCN321 link encoder due to different PHY version affecting
DP ALT related registers.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to the KMS man page, there is a
"Coverage" alpha blend mode that assumes the
pixel color values have NOT been pre-multiplied
and will be done when the actual blending to
the background color values happens.
Previously, this mode hasn't been enabled
in our driver and it was assumed that all
normal overlay planes are pre-multiplied
by default.
When a 3rd party app is used to input a image
in a specific format, e.g. PNG, as a source
of a overlay plane to blend with the background
primary plane, the pixel color values are not
pre-multiplied. So by adding "Coverage" blend
mode, our driver will support those cases.
Issue fixed: Overlay plane alpha channel blending is incorrect
Issue tracker: https://gitlab.freedesktop.org/drm/amd/-/issues/1769
Reference:
https://dri.freedesktop.org/docs/drm/gpu/drm-kms.html#plane-composition-properties
Adding Coverage support also enables IGT
kms_plane_alpha_blend Coverage subtests:
1. coverage-7efc
2. coverage-vs-premult-vs-constant
Changes
1. Add DRM_MODE_BLEND_COVERAGE blend mode capability
2. Add "pre_multiplied_alpha" flag for Coverage case
3. Read the correct flag and set the DCN MPCC
pre_multiplied register bit (only on overlay plane)
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1769
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's a local function, let's make it static.
AGD: remove prototype in dcn10_hubp.h
Signed-off-by: Tales Lelo da Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
