Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
Pull more SoC driver updates from Arnd Bergmann:
"These updates came a little late, or were based on a later 6.18-rc tag
than the others:
- A new driver for cache management on cxl devices with memory shared
in a coherent cluster. This is part of the drivers/cache/ tree, but
unlike the other drivers that back the dma-mapping interfaces, this
one is needed only during CPU hotplug.
- A shared branch for reset controllers using swnode infrastructure
- Added support for new SoC variants in the Amlogic soc_device
identification
- Minor updates in Freescale, Microchip, Samsung, and Apple SoC
drivers"
* tag 'soc-drivers-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: exynos-pmu: fix device leak on regmap lookup
soc: samsung: exynos-pmu: Fix structure initialization
soc: fsl: qbman: use kmalloc_array() instead of kmalloc()
soc: fsl: qbman: add WQ_PERCPU to alloc_workqueue users
MAINTAINERS: Update email address for Christophe Leroy
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
MAINTAINERS: rename Microchip RISC-V entry
MAINTAINERS: add new soc drivers to Microchip RISC-V entry
soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC
dt-bindings: soc: microchip: document the simple-mfd syscon on PolarFire SoC
...
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
New boards: QNAP TS233 (2-bay variant of the RK3568 NAS series) and
Asus Tinkerboard 3 + 3S.
Additional peripherals enabled on 100ASK DshanPi A1, Orange Pi 3B,
Indiedroid Nova, QNAP-TSx33 series + LED states on Radxa boards,
power-domains for the previously added RK3368 display components.
* tag 'v6.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
arm64: dts: rockchip: enable RTC for 100ASK DshanPi A1
arm64: dts: rockchip: enable USB for 100ASK DshanPi A1
arm64: dts: rockchip: enable button for 100ASK DshanPi A1
arm64: dts: rockchip: add mmc aliases for 100ASK DshanPi A1
arm64: dts: rockchip: remove mmc max-frequency for 100ASK DshanPi A1
arm64: dts: rockchip: Enable i2c2 on Orange Pi 3B
arm64: dts: rockchip: Use default-state for power LED for Radxa boards
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on 9Tripod X3568 v4
arm64: dts: rockchip: Add power-domain to RK3368 VOP controller
arm64: dts: rockchip: Add power-domain to RK3368 DSI controller
arm64: dts: rockchip: Add host wake pin for wifi on Indiedroid Nova
arm64: dts: rockchip: Correct pinctrl for pcie for Indiedroid Nova
arm64: dts: rockchip: Define regulator for pcie2x1l2 on Indiedroid Nova
arm64: dts: rockchip: Add clk32k_in for Indiedroid Nova
arm64: dts: rockchip: Add Asus Tinker Board 3 and 3S device tree
dt-bindings: arm: rockchip: Add Asus Tinker Board 3/3S
dt-bindings: arm: rockchip: merge Asus Tinker and Tinker S
arm64: dts: rockchip: add QNAP TS233 devicetree
dt-bindings: arm: rockchip: add TS233 to RK3568-based QNAP NAS devices
arm64: dts: rockchip: move common qnap tsx33 parts to dtsi
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add device tree bindings for Black Sesame Technologies Arm SoC,
it consists several SoC models like C1200, etc.
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards: 9Tripod X3568, 100ASK DShanPi A1, LinkEase EasePi R1,
FriendlyElec NanoPi R76S
Interesting archeological addition: RK3368 (2015) gets display
output afterall.
New peripherals: vicap on px30 and rk356x, PCIe Gen2x1 on RK3528,
use actual clock-ids for SCMI clocks - not hardcoded numbers,
CQE support for the eMMC on RK3588.
As well as a number of enablements for individual boards.
For example enablement for the now usable NPU.
* tag 'v6.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (43 commits)
arm64: dts: rockchip: add vicap node to rk356x
arm64: dts: rockchip: add the vip node to px30
arm64: dts: rockchip: fixes audio for 100ASK DshanPi A1
arm64: dts: rockchip: fixes vcc3v3_s0 supply for 100ASK DshanPi A1
arm64: dts: rockchip: fixes ethernet for 100ASK DshanPi A1
arm64: dts: rockchip: fixes regulator for 100ASK DshanPi A1
arm64: dts: rockchip: correct assigned-clock-rates spelling on 2 boards
arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova
arm64: dts: rockchip: add eMMC CQE support for rk3588
arm64: dts: rockchip: enable HDMI audio on Rock 5 ITX
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 3C
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 5A
arm64: dts: rockchip: Move the EEPROM to correct I2C bus on Radxa ROCK 5A
arm64: dts: rockchip: use SCMI clock id for gpu clock on rk356x
arm64: dts: rockchip: Remove sdmmc max-frequency on RK3588S EVB1 board
arm64: dts: rockchip: Remove sdmmc max-frequency for Radxa ROCK 5 ITX/5B/5B+/5T
arm64: dts: rockchip: Switch microSD card detect to gpio on Radxa ROCK 5 ITX/5C
arm64: dts: rockchip: Add devicetree for the 9Tripod X3568 v4
dt-bindings: arm: rockchip: Add 9Tripod X3568 series
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm64 DeviceTree updates for v6.19
Introduce support for the Redxa Dragon Q6A development board, the Huawei
MateBoot E 2019, the Asus ZenFone 2 Laser/Selfie, the MSM8937 platform
and the Xiaomo Redmi 3S device based on it.
SoC dtsi files for Agatti, Hamoa, Kodiak, Monaco, Purwa, and Talos, are
renamed in order to better facilitate the addition of new boards on the
various SKUs of these.
Cooling maps are introduced for the CPU cores in IPQ5424, and the
network subsystem clock controller is added.
On Lemans, RTC is enabled, the EVK fan controller is described and a
camera mezzanine overlay is introduced.
Touchscreen support is added to the BQ Aquaris M5, and the touchscreen
from Samsung Galaxy Core Prime is moved to the common platform to
benefit the other devices sharing common definitions.
On Agatti two more UARTs are described, as well as APR and the related audio
services, and the LPASS LPI pin controller. The RB1 board gets HDMI
autio playback support.
On Kodiak-based targets, Fairphone FP5 gains definitions of the UW camera
actuator, regulator for the ToF sensor, and haptic module. The SHIFT
SHIFTphone 8 gains RGB and flash LEDs, and Venus support. The Rb3Gen2
development board gets QUP firmware path defined, to support dynamic
loading of the serial engine firmware. Kodiak also gains Coresight
devices for AOSS and QDSS blocks.
Display support is added for the Talos platform, and enabled on the Ride
board. Talos also gains the definitions to scale DDR and L3
interconnects.
On SC8280XP, the camera privacy indicator on Lenovo Thinkpad X13s is
connected to the camera stack. Off-by-one GPI DMA channels are
corrected.
The SDM845-based LG and OnePlus custom defined rmtfs guard pages are
replaced with the inline-support for guard pages.
SDX75 DWC3 node is flattened and marked for USB role switching.
On SM8550, the camera subsystem and the S5K3M5 camera sensor is
introduced for the QRD, and an overlay for the "Rear Camera Card" for
the Hardware Development Kit (HDK) is introduced.
USB support is introduce for the SM8750 platform, and enabled in the MTP
and QRD devices.
On Hamoa, like on other devices the Asus Zenbook A14 definition of the
eDP panel is reworked to support both LCD and OLED configurations. WiFi
and Bluetooth is also enabled on the A14. The CRD gains support for
controlling charge limits.
The refgen regulator supplying DSI is defined and wired up on a variety
of platforms.
* tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (138 commits)
arm64: dts: qcom: sdx75: Add missing usb-role-switch property
arm64: dts: qcom: sdx75: Flatten usb controller node
arm64: dts: qcom: HAMOA-IOT-SOM: Unreserve GPIOs blocking SPI11 access
arm64: dts: qcom: qrb2210-rb1: Fix UART3 wakeup IRQ storm
Revert "arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature"
arm64: dts: qcom: kodiak: add coresight nodes
arm64: dts: qcom: sdm845-oneplus: Describe TE gpio
arm64: dts: qcom: sdm845-oneplus: Implement panel sleep pinctrl
arm64: dts: qcom: sdm845-oneplus: Group panel pinctrl
arm64: dts: qcom: sdm845-oneplus: Update compatbible and add DDIC supplies
arm64: dts: qcom: qcs6490-rb3gen2: Rename vph-pwr regulator node
arm64: dts: qcom: qcm6490-fairphone-fp5: Add UW cam actuator
arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI pull-up
arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform
arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
arm64: dts: qcom: rename x1p42100 to purwa
arm64: dts: qcom: rename sc7280 to kodiak
arm64: dts: qcom: rename qcm2290 to agatti
arm64: dts: qcom: add gpu_zap_shader label
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI K3 device tree updates for v6.19
Generic fixes and cleanups:
* Multiple SoCs: Disable CPSW in SoC files and
enable them in board files for better board-level control
* Replace rgmii-rxid with rgmii-id for CPSW ports across multiple boards
New Boards/SoM:
* AM62L SoC and basic support for EVM
* Toradex Aquila AM69 board support
* Kontron SMARC-sAM67 module and ADS2 carrier board support
Platform wide:
* Define possible system states amd wakeup-source (AM62/AM62A/AM62P)
SoC/EVM specific changes:
AM62:
* Add RNG node
* Add OLDI support
AM62P:
* Move audio_refclk to common main dtsi (k3-am62p-j722s-common-main)
* Fix memory ranges for GPU
AM62D2:
* Enable PMIC support on EVM
* Misc fixes
AM64:
* Add DMA support for TSCADC on EVM
AM69:
* Add Aquila board support with Clover variant
J722S:
* Fix audio refclk source in main dtsi
* Explicitly use PLL1_HSDIV6 audio refclk for EVM
J784S4/J742S2:
* Add bootph-all tag to support PCIe boot
Variscite VAR-SOM-AM62P:
* Add support for ADS7846 touchscreen
* Add support for WM8904 audio codec
* tag 'ti-k3-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (42 commits)
arm64: dts: ti: k3-am62l: add initial reference board file
arm64: dts: ti: k3-am62l: add initial infrastructure
dt-bindings: arm: ti: Add binding for AM62L SoCs
arm64: dts: ti: am69-aquila: Add Clover
arm64: dts: ti: Add Aquila AM69 Support
dt-bindings: arm: ti: add Toradex Aquila AM69
arm64: dts: ti: k3-j721s2: disable "mcu_cpsw" in SoC file and enable in board files
arm64: dts: ti: k3-j721e: disable "mcu_cpsw" in SoC file and enable it in board file
arm64: dts: ti: k3-j7200: disable "mcu_cpsw" in SoC file and enable in board file
arm64: dts: ti: k3-am65: disable "mcu_cpsw" in SoC file and enable in board file
arm64: dts: ti: k3-am62: disable "cpsw3g" in SoC file and enable in board file
arm64: dts: ti: k3-am62p5-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62a7-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62-lp-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62p: Define possible system states
arm64: dts: ti: k3-am62a: Define possible system states
arm64: dts: ti: k3-am62: Define possible system states
arm64: dts: ti: k3-am62p-j722s-common-main: move audio_refclk here
arm64: dts: ti: k3-*: Replace rgmii-rxid with rgmii-id for CPSW ports
arm64: dts: ti: k3-am642-tqma64xxl: add boot phase tags
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Changes for v6.19-rc1
Document various new IPs on older chips, as well as some existing
developer kits that were missing compatible strings. Add power domain
IDs on Tegra264 and wake-up support for the XUSB controller on Tegra234.
* tag 'tegra-for-6.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: usb: Add wake-up support for Tegra234 XUSB host controller
dt-bindings: devfreq: tegra30-actmon: Add Tegra124 fallback for Tegra210
dt-bindings: display: tegra: Document Tegra20 and Tegra30 CSI
dt-bindings: display: tegra: document EPP, ISP, MPE and TSEC for Tegra114+
dt-bindings: arm: tegra: Document Jetson Nano Devkits
dt-bindings: power: Add power domain IDs for Tegra264
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- MT7988 BananaPi R4 Pro eMMC and SD router board with support
for both Key-M and Key-E M.2 slots through DTB Overlays
- MT8370 Grinn GenioSBC-510 (GenioSOM-510 + GenioBoard Edge AI)
- MT8390 Grinn GenioSBC-700 (GenioSOM-700 + GenioBoard Edge AI)
- New variant: MT8395 MediaTek Genio 1200 EVK with UFS
...preparation for new SoCs (MT8196 Kompanio Ultra, a clone of the
MT6991 Dimensity 9400, and MT6878 Dimensity 7300) with the
addition of GCE/PIO definitions
...improvements for already supported SoCs and machines:
- MT7622/7981b/7986a/7988a gain support for reading SoC UUID from
eFuse, used to generate a persistent MAC address on boards that
don't have any factory-assigned addresses.
- MT7986 BananaPi R3 gets changes to its default fan PWM speed to
improve compatibility with cheaper fans (usually coming with the
heatsink+fan combos)
- The MT7981b OpenWRT One router sees general support improvements
with the enablement of its UART-0 console and correct pinmuxing
for the same, addition of reserved memory for Trusted Firmware A,
its SPI NOR Flash (for recovery system, WiFi eeprom data and ETH
MAC address from factory), and board LEDs.
- MT8365 gets support for its Mali G52 MC1 GPU, which gets enabled
in the MediaTek Genio 350 EVK board
...and a dt-bindings warning fix for MT8183 machines through trivial
changes to rename the audiosys and afe nodes to reflect bindings.
* tag 'mtk-dts64-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (27 commits)
arm64: dts: mediatek: mt7981b-openwrt-one: Enable software leds
arm64: dts: mediatek: mt7981b-openwrt-one: Enable SPI NOR
arm64: dts: mediatek: mt7988a-bpi-r4pro: Add mmc overlays
arm64: dts: mediatek: mt7988a-bpi-r4-pro: Add PCIe overlays
arm64: dts: mediatek: mt7988: Add devicetree for BananaPi R4 Pro
arm64: dts: mediatek: mt7988: Disable 2.5G phy and enable at board layer
dt-bindings: arm: mediatek: add BPI-R4 Pro board
arm64: dts: mediatek: Add GCE header for MT8196
arm64: dts: mediatek: mt7981b: Add reserved memory for TF-A
arm64: dts: mediatek: mt7981b: Configure UART0 pinmux
arm64: dts: mediatek: mt8365-evk: Enable GPU support
arm64: dts: mediatek: mt8365: Add GPU support
arm64: dts: mediatek: mt8395-genio-1200-evk: Describe CPU supplies
arm64: dts: mediatek: Add MT6878 pinmux macro header file
arm64: dts: mediatek: mt7986-bpi-r3: Change fan PWM value for mid speed
arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn GenioSBC-510
arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700
arm64: dts: mediatek: mt7988a: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7981b: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7986a: add 'soc-uuid' cell to efuse
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek ARM32 Device Tree updates
This performs a cleanup of the MT6582 devicetrees and adds support
for secondary cores bringup on this SoC.
This also introduces basic support for a new machine, the MT6582
Alcatel "yarisxl" Pop C7 (OT-7041D) smartphone, with support for
booting into a initramfs with UART console output.
* tag 'mtk-dts32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: drop wrong syscon hifsys compatible for MT2701/7623
ARM: dts: mediatek: add basic support for Alcatel yarisxl board
dt-bindings: arm: mediatek: Add MT6582 yarisxl
ARM: dts: mediatek: mt6582: add enable-method property to cpus
ARM: dts: mediatek: mt6582: add clock-names property to uart nodes
ARM: dts: mediatek: mt6582: add mt6582 compatible to timer
ARM: dts: mediatek: mt6582: remove compatible property from root node
ARM: dts: mediatek: mt6582: sort nodes and properties
ARM: dts: mediatek: mt6582: move MMIO devices under soc node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Convert the Marvell AP80x System Controller binding to DT schema format.
There's not any specific compatible for the whole block which is a
separate problem, so just the child nodes are documented. Only the
pinctrl and clock child nodes need to be converted as the GPIO node
already has a schema.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251014153040.3783896-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the Marvell CP110 System Controller binding to DT schema
format.
There's not any specific compatible for the whole block which is a
separate problem, so just the child nodes are documented. Only the
pinctrl and clock child nodes need to be converted as the GPIO node
already has a schema.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251022165509.3917655-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
From software perspective, Rev.C HDMI and Rev.B HDMI don't differ since
the panel is connected via HDMI and the touchscreen is connected via
USB. However, the bootloader firmware expects to find a dts with the
correct revc-hdmi compatible.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the binding for the generic Mercury+ AA1 on PE1 carrier board.
The removed Mercury+ AA1 on PE1 carrier board is just a particular
setup case, which is actually replaced by the set of generic Mercury+
AA1 combinations patch.
In other words a combination of a Mercury+ AA1 on a PE1 base board,
with boot mode SD card is already covered by the generic AA1
combinations. There is no further reason to keep this particular case
now in a redundantly. Thus the redundant DT setup is removed.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Update binding with combined .dts for the Mercury+ PE1, PE3 and ST1
carrier boards with the Mercury+ AA1 SoM.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
