Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new properties for battery internal resistance and state of
health
Power-supply drivers:
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr:
- add charge control support
- add support for state of health and internal resistance
- max77705_charger:
- big driver cleanup
- add support for setting charge current
- misc minor fixes and cleanups"
* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: qcom_battmgr: handle charging state change notifications
power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
power: supply: max77705_charger: rework interrupts
power: supply: max77705_charger: add writable properties
power: supply: max77705_charger: return error when config fails
power: supply: max77705_charger: use regfields for config registers
power: supply: max77705_charger: refactoring: rename charger to chg
mfd: max77705: max77705_charger: move active discharge setting to mfd parent
power: supply: max77976_charger: fix constant current reporting
power: supply: qcom_battmgr: Add charge control support
dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
power: supply: qcom_battmgr: Add state_of_health property
power: supply: qcom_battmgr: Add resistance power supply property
power: supply: core: Add state_of_health power supply property
power: supply: core: Add resistance power supply property
power: supply: rx51: remove redundant condition checks
dt-bindings: power: supply: bq24190: document charge enable pin
dt-bindings: power: supply: bq27xxx: document optional interrupt
power: supply: intel_dc_ti_battery: Drop no longer relevant comment
...
Document active low Charge Enable pin. Battery charging is enabled when
REG01[5:4] = 01 and CE pin = Low. CE pin must be pulled high or low.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Document an optional interrupt found in some controllers of BQ27xxx
series. The pin to which the interrupt is connected is called SOC_INT or
GPOUT.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The active-semi,act8945a binding is documented in multiple places. The
charger child node is documented in regulator/active-semi,act8945a.yaml
and power/supply/active-semi,act8945a-charger.yaml. An old text binding
is in mfd/act8945a.txt.
Update the regulator/active-semi,act8945a.yaml with the additional
descriptions and constraints from
power/supply/active-semi,act8945a-charger.yaml, and then remove it and
mfd/act8945a.txt.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250807214459.4173892-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- remove unused set_charged infrastructure
- drop of_node from power_supply struct
Power-supply drivers:
- axp717: support devices without thermistors
- bq27xxx: support max design voltage for bq270x0 and bq27x10
- pcf50633: drop charger driver
- max1720x: add battery health support
- switch all power-supply devices from of_node to fwnode
- convert regmap users to maple tree register cache
- convert drivers to devm_kmemdup_array
- misc cleanups and fixes
Reset drivers:
- at91-sama5d2_shdwc: add sama7d65 support
* tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: mt6370: Remove redundant 'flush_workqueue()' calls
Revert "power: supply: bq27xxx: do not report bogus zero values"
power: supply: max77693: Fix wrong conversion of charge input threshold value
power: supply: pcf50633: Remove charger
power: supply: all: switch psy_cfg from of_node to fwnode
power: supply: core: get rid of of_node
power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC
power: supply: smb347: convert to use maple tree register cache
power: supply: rt9455: convert to use maple tree register cache
power: supply: max1720x: convert to use maple tree register cache
power: supply: ltc4162l: convert to use maple tree register cache
power: supply: bq25980: convert to use maple tree register cache
power: supply: bq25890: convert to use maple tree register cache
power: supply: bq2515x: convert to use maple tree register cache
power: supply: bq24257: convert to use maple tree register cache
power: supply: bd99954: convert to use maple tree register cache
power: supply: Remove unused set_charged method
power: supply: ds2760: Remove unused ds2760_battery_set_charged
power: supply: core: Remove unused power_supply_set_battery_charged
power: supply: sc27xx: use devm_kmemdup_array()
...
With DT properties charge-current-limit-gpios and
charge-current-limit-mapping one can define charge current limits in uA
using up to 32 GPIOs. Add property charge-current-limit-default-microamp
which selects a default charge current limit that must be listed in
charge-current-limit-mapping.
This is helpful when the smallest possible charge current limit is 0uA. The
driver defaults to the smallest possible value at the moment, which
disables charging on probe. With the default its possible to setup a safe
charge current limit.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20241218-default-charge-current-limit-v3-1-b26118cf06b5@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add LTC4162-F/S and LTC4015 to the supported devices of LTC4162-L.
They share a common set of registers. The only differences lie in the
resolution value of the scaling factor for battery voltage and battery
current measurement, input voltage, and input current for different
battery chemistries. The differences also include the calculation of
setting and getting the actual voltage applied to the charge voltage,
as well as getting the die temperature.
This add compatible entries for ltc4162-f/s and ltc4015 and include
datasheets for new devices.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20241213023746.34168-2-kimseer.paller@analog.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
The SC27XX fuel gauge supports a low voltage alarm IRQ, which is used
for more accurate battery capacity measurements with lower voltages.
This was unfortunately never documented in bindings, do so now.
The only in-tree user (sc2731.dtsi) has had interrupts specified
since its initial fuel-gauge submission and the current kernel
driver returns an error when no interrupt is specified, so also
add it to the required list.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/Zr3SAHlq5A78QvrW@standask-GA-A55M-S2HP
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Pull power supply and reset updates from Sebastian Reichel:
"New features:
- bq24190: Add support for BQ24296 charger
Cleanups:
- all reset drivers: Stop using module_platform_driver_probe()
- gpio-restart: use devm_register_sys_off_handler
- pwr-mlxbf: support graceful reboot
- cw2015: correct time_to_empty units
- qcom-battmgr: Fix driver initialization sequence
- bq27xxx: Start/Stop delayed work in suspend/resume
- minor cleanups and fixes"
* tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
power: supply: bq24190_charger: Fix "initializer element is not constant" error
power: supply: bq24190_charger: Add support for BQ24296
dt-bindings: power: supply: bq24190: Add BQ24296 compatible
dt-bindings: power: reset: xilinx: Rename node names in examples
power: supply: qcom_battmgr: Register the power supplies after PDR is up
dt-bindings: power: reset: qcom-pon: fix inconsistent example
power: supply: Fix null pointer dereference in smb2_probe
power: reset: at91: Drop '__init' from at91_wakeup_status()
power: supply: Use multiple MODULE_AUTHOR statements
power: supply: Fix indentation and some other warnings
power: reset: gpio-restart: Use devm_register_sys_off_handler()
power: supply: bq256xx: fix some problem in bq256xx_hw_init
power: supply: cw2015: correct time_to_empty units in sysfs
power: reset: at91-sama5d2_shdwc: Convert to platform remove callback returning void
power: reset: at91-reset: Convert to platform remove callback returning void
power: reset: tps65086-restart: Convert to platform remove callback returning void
power: reset: syscon-poweroff: Convert to platform remove callback returning void
power: reset: rmobile-reset: Convert to platform remove callback returning void
power: reset: restart-poweroff: Convert to platform remove callback returning void
power: reset: regulator-poweroff: Convert to platform remove callback returning void
...
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Allow all MFD Cell properties to be filled in dynamically at
runtime
- Skip disabled device nodes and continue to look for subsequent
devices
New Device Support:
- Add support for Lunar Lake-M PCI to Intel LPSS PCI
- Add support for Denverton to Intel ICH LPC
New Functionality:
- Add support for Clocks to Texas Instruments TWL* Core
- Add support for Interrupts to STMicroelectronics STM32 Timers
Fix-ups:
- Convert to new devm-* (managed) power-off API
- Remove superfluous code
- Bunch of Device Tree additions, conversions and adaptions
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Trivial coding-style / spelling type clean-ups
- Constify / staticify changes
- Expand or edit on existing documentation
- Convert some Regmap configurations to use the Maple Tree cache
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Replace strncpy() with strscpy()
Bug Fixes:
- Remove double put creating reference imbalances
- Ensure headphone/lineout detection gets set when booting with ACPI"
* tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
mfd: lpc_ich: Mark *_gpio_offsets data with const
spmi: rename spmi device lookup helper
spmi: document spmi_device_from_of() refcounting
dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
mfd: rk8xx: Add support for RK806 power off
mfd: rk8xx: Add support for standard system-power-controller property
dt-bindings: mfd: rk806: Allow system-power-controller property
dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller
dt-bindings: mfd: max8925: Convert to DT schema format
mfd: Use i2c_get_match_data() in a selection of drivers
mfd: Use device_get_match_data() in a bunch of drivers
mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data()
mfd: motorola-cpcap: Drop unnecessary of_match_device() call
mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs
mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL()
mfd: qcom-spmi-pmic: Fix revid implementation
mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
mfd: intel-m10-bmc: Change contact for ABI docs
mfd: max8907: Convert to use maple tree register cache
mfd: max77686: Convert to use maple tree register cache
...
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Add unevaluatedProperties as needed, and then add any missing properties
flagged by the addition.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926164446.101327-1-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
