Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
The Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs have four SPI
peripherals.
Compared to the previously supported RZ/V2H, these SoCs have a smaller
FIFO, no resets, and only two clocks: PCLKSPIn and PCLK. PCLKSPIn,
being the clock from which the SPI transfer clock is generated, is the
equivalent of the TCLK from V2H.
Document them, and use RZ/T2H as a fallback for RZ/N2H as the SPIs are
entirely compatible.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251119161434.595677-11-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add AST2700 to the list of supported SoCs in the ASPEED FMC/SPI bindings.
AST2700 FMC/SPI controllers are not compatible with AST2600 due to the
following hardware differences:
- Address decoding unit uses 64KB granularity (AST2600 uses 1MB).
- Segment register semantics are changed.
AST2600: start <= range <= end
AST2700: start <= range < end
- Hardware limitations in AST2600 address decoding registers have been
resolved in AST2700, so extra callback function used for bug fixup
is no longer required.
These differences require distinct compatible strings for AST2700.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251114101042.1520997-2-chin-ting_kuo@aspeedtech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>:
This patch series adds support for the Microchip FPGA CoreSPI "soft" IP
and documents its device tree bindings.
As preparation, the existing Microchip SPI driver is renamed to clearly
indicate that it supports only the Microchip PolarFire SoC "hard" controller.
Although it was originally named with the expectation that it might also
cover the FPGA CoreSPI "soft" IP, the register layouts differ significantly,
so separate drivers are required.
Merge series from Jun Guo <jun.guo@cixtech.com>:
The Cadence SPI IP supports configurable FIFO data widths during
integration. On some SoCs, the FIFO data width is designed to be 16 or
32 bits at the chip design stage. However, the current driver only
supports communication with an 8-bit FIFO data width. Therefore, these
patches are added to enable the driver to support communication with
16-bit and 32-bit FIFO data widths.
Merge series from Alex Elder <elder@riscstar.com>:
This series adds support for the SpacemiT K1 SoC QSPI. This IP is
generally compatible with the Freescale QSPI driver, requiring three
minor changes to enable it to be supported. The changes are:
- Adding support for optional resets
- Having the clock *not* be disabled when changing its rate
- Allowing the size of storage blocks written to flash chips
to be set to something different from the AHB buffer size
Merge series from Vishwaroop A <va@nvidia.com>:
This patch series addresses timeout handling issues in the Tegra QSPI driver
that occur under high system load conditions. We've observed that when CPUs
are saturated (due to error injection, RAS firmware activity, or general CPU
contention), QSPI interrupt handlers can be delayed, causing spurious transfer
failures even though the hardware completed the operation successfully.
These changes have been tested in production environments under various high
load scenarios including RAS testing and CPU saturation workloads.
When the binding for the Cadence spi controller was written, a dedicated
compatible was added for the zynq device. Later when zynqmp and
versal-net, which also use this spi controller IP, were added they did
not receive soc-specific compatibles. Add them now, with a fallback to
the existing compatible for the r1p6 version of the IP so that there
will be no functional change. Retain the r1p6 in the string, to match
what was done for zynq.
Disallow the cdns,spi-r1p6 compatible in isolation to "encourage" people
to actually add soc-specific compatible strings in the future.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20251001-basics-grafting-a1a214ef65ac@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
Apple SoC driver updates for 6.18
Krzysztof Kozlowski asked us to move away from generic compatibles:
- Adjust all dt-bindings to use apple,t8103-XXXX instead of apple,XXXX
as fallback and add a comment that the old generic list should no
longer be extended.
- Add new fallback compatibles to pinctrl, pmdomain, spi, and mca
drivers. These changes have been Acked by their subsystem maintainers
to be merged through our tree together with the dt-bindings.
Support for pre-M1 Apple Silicon:
- SART and mailbox gain support for Apple's A11, which are both
required for NVMe.
- NVMe also gains support for Apple's A11 and the nvme maintainers
prefer that we merge this through the soc tree together with
the mailbox and SART changes.
- SPMI compatibles for A11 and T2 have been added, also going through
the soc tree due to conflicts with the generic compatible removal and
because no driver change is required.
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux: (32 commits)
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
spi: apple: Add "apple,t8103-spi" compatible
ASoC: apple: mca: Add "apple,t8103-mca" compatible
pinctrl: apple: Add "apple,t8103-pinctrl" as compatible
spi: dt-bindings: apple,spi: Add t6020-spi compatible
ASoC: dt-bindings: apple,mca: Add t6020-mca compatible
dt-bindings: dma: apple,admac: Add t6020-admac compatible
dt-bindings: clock: apple,nco: Add t6020-nco compatible
dt-bindings: watchdog: apple,wdt: Add t6020-wdt compatible
dt-bindings: spmi: apple,spmi: Add t6020-spmi compatible
dt-bindings: mfd: apple,smc: Add t6020-smc compatible
dt-bindings: net: bcm4329-fmac: Add BCM4388 PCI compatible
dt-bindings: net: bcm4377-bluetooth: Add BCM4388 compatible
dt-bindings: nvme: apple: Add apple,t6020-nvme-ans2 compatible
dt-bindings: iommu: apple,sart: Add apple,t6020-sart compatible
dt-bindings: gpu: apple,agx: Add agx-{g14s,g14c,g14d} compatibles
dt-bindings: mailbox: apple,mailbox: Add t6020 compatible
dt-bindings: pinctrl: apple,pinctrl: Add apple,t6020-pinctrl compatible
dt-bindings: iommu: dart: Add apple,t6020-dart compatible
...
Link: https://lore.kernel.org/r/20250920123028.49973-1-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge series from Dharma Balasubiramani <dharma.b@microchip.com>:
This patch series adds support for SAM9X7 and sama7d65 QSPI controller
along with the SoC-specific capabilities.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,spi" anymore [1]. Use
"apple,t8103-spi" as base compatible as it is the SoC the driver and
bindings were written for.
The SPI controller on Apple M2 Pro/Max/Ultra SoCs is compatible with
"apple,t8103-spi" so add its per-SoC compatible with the former as
fallback used by the existing driver.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
This Flash Controller is derived by adding an SPI path to the original
raw NAND controller. This controller supports two modes: raw mode and
SPI mode. The raw mode has already been implemented in the community
(drivers/mtd/nand/raw/meson_nand.c).
This submission supports the SPI mode.
Add the drivers and bindings corresponding to the SPI Flash Controller.
Merge series from James Clark <james.clark@linaro.org>:
Improve usability of target mode by reporting FIFO errors and increasing
the buffer size when DMA is used. While we're touching DMA stuff also
switch to non-coherent memory, although this is unrelated to target
mode.
With the combination of the commit to increase the DMA buffer size and
the commit to use non-coherent memory, the host mode performance figures
are as follows on S32G3:
# spidev_test --device /dev/spidev1.0 --bpw 8 --size <test_size> --cpha --iter 10000000 --speed 10000000
Coherent (4096 byte transfers): 6534 kbps
Non-coherent: 7347 kbps
Coherent (16 byte transfers): 447 kbps
Non-coherent: 448 kbps
Just for comparison running the same test in XSPI mode:
4096 byte transfers: 2143 kbps
16 byte transfers: 637 kbps
These tests required hacking S32G3 to use DMA in host mode, although
the figures should be representative of target mode too where DMA is
used. And the other devices that use DMA in host mode should see similar
improvements.
Merge series from Zixian Zeng <sycamoremoon376@gmail.com>:
Add support SPI NOR flash memory controller for SG2042, using upstreamed
SG2044 SPI NOR driver.
Tested on SG2042 Pioneer Box, read, write operations.
Thanks Chen Wang who provided machine and guidance.
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
Introduced support for the new SPI IP (SPISG). The SPISG is
a communication-oriented SPI controller from Amlogic,supporting
three operation modes: PIO, block DMA, and scatter-gather DMA.
Add the drivers and device tree bindings corresponding to the SPISG.
With further testing, directly using the spi-sg2044-nor driver on SG2042
does not work. SG2042 is found to lack full compatibility with SG2044.
SG2044 has OPT register and it's necessary to write but SG2042 does not.
Due to other possible hardware detail differences, it is better
to bind SG2042 independently.
Fixes: 8450f1e0d3 ("spi: dt-bindings: spi-sg2044-nor: Add SOPHGO SG2042")
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Link: https://patch.msgid.link/20250720-sfg-spifmc-v4-1-033188ad801e@gmail.com
Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Marvell Orion SPI binding to schema.
Update compatible strings to what is in use. Generally,
"marvell,orion-spi" is a fallback compatible, but newer variants only
use "marvell,armada-380-spi".
Mark cell-index as deprecated and not required as some instances don't
use it already.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250702222643.2761617-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Clément Le Goffic <clement.legoffic@foss.st.com>:
This series aims to improve the STM32 SPI driver in different areas.
It adds SPI_READY mode, fixes an issue raised by a kernel bot,
add the ability to use DMA-MDMA chaining for RX and deprecate an ST bindings
vendor property.
Merge series from James Clark <james.clark@linaro.org>:
DT and driver changes for DSPI on S32G platforms. First 3 commits are
fixes for various edge cases which also apply to other platforms.
Remaining commits add new S32G registers and device settings, some S32G
specific fixes and then finally add the DT compatibles and binding docs.
Tested in both host and target mode on S32G-VNP-RDB3 by transferring to
an external device over spi1 using spidev_test.c
