[Why]
The inbox1 infrastructure is deprecated, so to support display
power features requiring a DMUB interlock moving forward extend
the inbox0 locking conditions to also include Replay or PSR.
[How]
Implemented a series of changes to improve HW lock handling:
- Deprecated should_use_dmub_inbox1_lock() and guarded it with
DCN401 flag.
- Migrated lock checks into inbox0 helpers and added PSR/Replay
enablement checks to ensure correct behavior.
- Updated HWSS fast update path to acquire HW lock as needed
using the new helpers.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Andrew Mazour <Andrew.Mazour@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We support two kinds of analog connections:
1. DVI-I, which allows both digital and analog signals:
The DC code base only allows 1 encoder per connector, and the
preferred engine type is still going to be digital. So, for DVI-I
to work, we need to make sure the pre-existing link encoder can
also work with analog signals.
1. VGA, which only supports analog signals:
For VGA, we need to create a link encoder that only works with the
DAC without perturbing any digital transmitter functionality.
Since dce110_link_encoder already supports analog DVI-I,
just reuse that code for VGA as well.
v2:
Reduce code churn by reusing same link encoder for VGA and DVI-I.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add analog stream encoders for DCE which will be used when
connecting an analog display through VGA or DVI-I.
Considering that all stream encoder functions currently deal
with digital streams, there is nothing for an analog stream
encoder to do, making them basically a no-op.
That being said, we still need some kind of stream encoder to
represent an analog stream, and it is beneficial to split them
from digital stream encoders in the code to make sure they
don't accidentally write any DIG* registers.
On supported chips there is currently up to 1 analog encoder,
which is DACA. There are references to DACB in some code such
as VBIOS commands and register files but it seems to be
not present on DCE 6 and newer.
Set num_analog_stream_encoder = 1 so that we can support
the analog connectors on DCE 6-10, for now.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Newer DCN use the DMCUB HW lock via inbox0 for performance reasons while
older ones will use inbox1.
The should_use_dmub_lock() function does not describe whether the lock
in general should be used, but whether it should be used via inbox1.
[How]
Rename the function to should_use_dmub_inbox1_lock() to reflect this.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's possible to have a stream enabled without a link or link encoder.
There are cases where we'd still like to interlock the driver
programming from firmware programming to ensure that we don't put the
hardware in an undefined (or error) state if two programming sequences
are simultaneously executed on the same hardware blocks.
[How]
Add an explicit DC parameter to should_use_dmub_lock().
Make pointers to should_use_dmub_lock() const since it's a checker
function that shouldn't modify state.
Update the callsites to pass in DC explicitly.
Check that the link is non-NULL before deferencing and performing link
based checks.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SCL_SCALER_ENABLE can be used to enable/disable the scaler
on DCE6. Program it to 0 when scaling isn't used, 1 when used.
Additionally, clear some other registers when scaling is
disabled and program the SCL_UPDATE register as recommended.
This fixes visible glitches for users whose BIOS sets up a
mode with scaling at boot, which DC was unable to clean up.
Fixes: b70aaf5586 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, the code would set a bit field which didn't exist
on DCE6 so it would be effectively a no-op.
Fixes: b70aaf5586 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
We need to inform DMUB whether fast sync in ultra sleep mode is supported,
so that it can disable desync error detection when the it is not enabled.
This helps prevent unexpected desync errors when transitioning out of
ultra sleep mode.
Add fast sync in ultra sleep mode field in replay copy setting command.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Allen Li <wei-guang.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Header file name "link.h" collides with system header when dc is
compiled as a user-mode library
[WHAT]
Rename link.h to link_service.h to avoid name collision
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
UHBR link rate capable eDPs will use HPO for encoding. Need to pass
HPO stream and link encoder instances to DMCUB for Replay FSM to
know which instances to use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
DP1 eDP is still considered a single-eDP case and should support Panel Replay.
Modify secondary eDP policy to reflect this and update Replay state accordingly.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When booting without an HDMI display connected, the I2C registers
are not initialized correctly, leading to DC_I2C_ARBITRATION register
getting stuck with DC_I2C_REG_RW_CNTL_STATUS == USED_BY_SW.
[How]
* Correct TOCTOU race condition in engine acquire logic which did not
check against DMUB trying to acquire it at the same time.
* Deassert SOFT_RESET before acquire, as it can block access to other
I2C registers.
* Add a workaround in release, checking that after triggerring
DC_I2C_SW_DONE_USING_I2C_REG, DC_I2C_REG_RW_CNTL_STATUS != USED_BY_SW.
If necessary, trigger DC_I2C_SW_DONE_USING_I2C_REG again.
* Remove unnecessary clear of DC_I2C_SW_USE_I2C_REG_REQ, which engine
ignores according to specification.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some pixel clock margin sensitive external monitor,
we could not keep original DP ref clock for the ASICs
supported SSC DP ref clock.
[How]
From slicon design team's comment,
we have to apply the adjusted DP ref clock for
DP devices.
DP 128b (DP2) signals uses the DTBCLK not DP ref.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DMUB locking is important to make sure that registers aren't accessed
while in PSR. Previously it was enabled but caused a deadlock in
situations with multiple eDP panels.
[HOW]
Detect if multiple eDP panels are in use to decide whether to use
lock. Refactor the function so that the first check is for PSR-SU
and then replay is in use to prevent having to look up number
of eDP panels for those configurations.
Fixes: f245b400a2 ("Revert "drm/amd/display: Use HW lock mgr for PSR1"")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3965
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some panels may not handle idle pattern properly during PSR entry.
[HOW]
Add a condition to allow multiple options on power down
sequence during PSR1 entry.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Martin Tsai <Martin.Tsai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The `dc_tiling_info` union previously did not have a field to
specify the active GFX format, assuming only one format would
be used per DCN version. from DCN4+, support for switching
between different GFX formats is introduced, requiring a way
to track which format is currently in use.
[HOW]
Updated the `dc_tiling_info` union to include a new field that
explicitly indicates the currently used GFX format.
This allows the system to determine the active GFX format
and take the correct programming path accordingly.
[Description]
The union `dc_tiling_info` has been updated to support multiple
GFX formats by adding a new field for identifying the active format.
This update ensures that the correct programming path is followed
based on the selected format. All references to `dc_tiling_info`
in the codebase have been updated to reflect the new structure.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
misc0, temp and split_pipe are assigned but immediately re-assigned
to other values. The early assignments are useless and are removed.
Unused variables are removed as well.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the commit c2cec7a872b6 ("drm/amd/display: Wake DMCUB before sending
a command for replay feature"), replaced dm_execute_dmub_cmd with
dc_wake_and_execute_dmub_cmd in multiple areas, but due to merge issues
the replacement of this function in the dmub_replay_copy_settings was
missed. This commit replaces the old dm_execute_dmub_cmd with
dc_wake_and_execute_dmub_cmd.
Fixes: 3601a35a2e ("drm/amd/display: Wake DMCUB before sending a command for replay feature")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Integer multiplies integer may overflow in context that expects an
expression of unsigned/siged long long (64 bits). This can be fixed
by casting integer to unsigned/siged long long to force 64 bits results.
This fixes 26 OVERFLOW_BEFORE_WIDEN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
