For S3 on vangogh, PMFW needs to be notified before the
driver powers down RLC. This already happens in smu_disable_dpms()
so drop the superfluous call in amdgpu_device_suspend().
Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When passed around internally the upper 8 bits of power limit include
the limit type. This is non-obvious without digging into the nuances
of each function. Instead pass the limit type as an argument to all
applicable layers.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code isn't needed anymore as we collect the same information
into pm_display_cfg instead.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit is necessary for DC to function well with chips
that use the legacy power management code, ie. SI and KV.
Communicate display information from DC to the legacy PM code.
Currently DC uses pm_display_cfg to communicate power management
requirements from the display code to the DPM code.
However, the legacy (non-DC) code path used different fields
and therefore could not take into account anything from DC.
Change the legacy display code to fill the same pm_display_cfg
struct as DC and use the same in the legacy DPM code.
To ease review and reduce churn, this commit does not yet
delete the now unneeded code, that is done in the next commit.
v2:
Rebase.
Fix single_display in amdgpu_dpm_pick_power_state.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change introduces infrastructure to check whether VCN reset
is supported by the SMU firmware. Key changes include:
1. Added new functions to query VCN reset support:
- amdgpu_dpm_reset_vcn_is_supported()
- smu_reset_vcn_is_supported()
- pptable_funcs.reset_vcn_is_supported callback
2. Implemented proper locking in the DPM layer with mutex protection
3. Maintained consistency with existing SDMA reset support checks
The new capability allows callers to check for VCN reset support
before attempting the operation, preventing unnecessary attempts
on unsupported platforms.
v2: clean up debug info(Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dpm interface to get gpuboard/baseboard temperature metrics
v2: Add temperature metrics support check(Lijo)
v3: Return error code in case of operation not supported(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used for display idle optimizations when
we want to pause non-default profiles.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain cases, it's desirable to avoid PMFW log transactions to
system memory. Add a mask bit to decide whether to allocate smu pool in
device memory or system memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new function to check if the SMU supports resetting the SDMA engine.
This capability check ensures that the driver does not attempt to reset the SDMA engine
on hardware that does not support it.
The following changes are included:
- New function `amdgpu_dpm_reset_sdma_is_supported` to check SDMA reset
support at the AMDGPU driver level.
- New function `smu_reset_sdma_is_supported` to check SDMA reset support
at the SMU level.
- Implementation of `smu_v13_0_6_reset_sdma_is_supported` for the specific
SMU version v13.0.6.
- Updated `smu_v13_0_6_reset_sdma` to use the new capability check before
attempting to reset the SDMA engine.
v2: change smu_reset_sdma_is_supported type to bool (Tim)
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_enable_vcn() function, and change
all calls from vcn ip functions to add instance argument. vcn generations
with only one instance (v1.0, v2.0) always use 0 as instance number. vcn
generations with multiple instances (v2.5, v3.0, v4.0, v4.0.3, v4.0.5,
v5.0.0) use the actual instance number.
v2: remove for-loop in amdgpu_dpm_enable_vcn(), and temporarily move it
to vcn ip with multiple instances, in order to keep the exact same logic
as before, until further separation in next patch.
v3: fix missing prefix
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_set_powergating_by_smu() function,
and use the instance to call set_powergating_by_smu().
v2: remove duplicated functions.
remove for-loop in amdgpu_dpm_set_powergating_by_smu(), and temporarily
move it to amdgpu_dpm_enable_vcn(), in order to keep the exact same logic
as before, until further separation in next patch.
v3: drop SI logic in amdgpu_dpm_enable_vcn().
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement sdma soft reset by sending MSG_ResetSDMA on smu 13.0.6.
v2: Add firmware version for the reset message.
v3: Add ip version check. Print inst_mask on failure.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Together with the feature to enable or disable zero RPM in the last
commit, it also makes sense to expose the OD setting determining under
which temperature the fan should stop if zero RPM is enabled.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set/get information about different DPM policies. The
support is only available on SOCs which use swsmu architecture.
A DPM policy type may be defined with different levels. For example, a
policy may be defined to select Pstate preference and then later a
pstate preference may be chosen.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
add a new enumeration type to identify device attribute node,
this method is relatively more efficient compared with 'strcmp' in
update_attr() function.
v2:
rename device_attr_type to device_attr_id.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Ma Jun <majun@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There will be multiple interfaces(sysfs files) exposed with each representing
a single OD functionality. And all those interface will be arranged in a tree
liked hierarchy with the top dir as "gpu_od". Meanwhile all functionalities
for the same component will be arranged under the same directory.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Preparation for coming optimization which eliminates the influence of
GPU temperature momentary fluctuation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added a sysfs interface for thermal throttling, then userspace
can get/update thermal limit
Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debugfs interface to log GFXOFF statistics:
- Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the
time of query since system power-up
- Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop.
Read it to get average GFXOFF residency % multiplied by 100
during the last logging interval.
Both features are designed to be keep the values persistent between
suspends.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suppress the following compile warning:
In file included from drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_0_ppt.c:39:
>> drivers/gpu/drm/amd/amdgpu/../pm/inc/smu_v13_0_0_pptable.h:194:39:
warning: field overdrive_table within 'struct smu_13_0_0_powerplay_table' is
less aligned than 'struct smu_13_0_0_overdrive_table' and is usually due to
'struct smu_13_0_0_powerplay_table' being packed,
which can lead to unaligned accesses [-Wunaligned-access]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
