Add support to configure and retrieve ppt1 limit for smu_v13_0_12
v2: Add update_caps function and update ppt1 cap based on max ppt1
value, optimize the return values (Lijo)
v3: Add Null ptr check, return not supported in case of invalid
level/type (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vangogh has separate limits for default PPT and fast PPT. Add
infrastructure to save both of these limits and restore both of them.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds support for VCN reset functionality in SMU v13.0.12 by:
1. Adding two new PPSMC messages in smu_v13_0_12_ppsmc.h:
- PPSMC_MSG_ResetVCN (0x5E)
- Updates PPSMC_Message_Count to 0x5F to account for new messages
2. Adding message mapping for ResetVCN in smu_v13_0_12_ppt.c:
- Maps SMU_MSG_ResetVCN to PPSMC_MSG_ResetVCN
These changes enable proper VCN reset handling through the SMU firmware
interface for compatible AMD GPUs.
v2: Added fw version check to support vcn queue reset.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement caching separately for SystemMetrics table from PMFW. The same
table could be used for multiple interfaces. Hence, cache it internally
to avoid multiple queries to the firmware. For SystemMetrics table, 5ms
cache interval is sufficient.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit implements VCN reset capability for SMU v13.0.6 with the following changes:
1. Added new PPSMC message ID (0x5B) for VCN reset in SMU firmware interface
2. Extended SMU capabilities to include VCN_RESET support
3. Implemented VCN reset support check:
- Added smu_v13_0_6_reset_vcn_is_supported() function
4. Updated SMU v13.0.6 PPT functions to include VCN reset operations
v2: clean up debug info (Alex)
v3: remove unsupported message and split smu v13.0.6 changes to a separate patch (Lijo)
v4: simply the function (smu_v13_0_6_reset_vcn_is_supported) (Lijo)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change introduces infrastructure to check whether VCN reset
is supported by the SMU firmware. Key changes include:
1. Added new functions to query VCN reset support:
- amdgpu_dpm_reset_vcn_is_supported()
- smu_reset_vcn_is_supported()
- pptable_funcs.reset_vcn_is_supported callback
2. Implemented proper locking in the DPM layer with mutex protection
3. Maintained consistency with existing SDMA reset support checks
The new capability allows callers to check for VCN reset support
before attempting the operation, preventing unnecessary attempts
on unsupported platforms.
v2: clean up debug info(Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch system metrics table to fill gpuboard/baseboard temperature
metrics data for smu_v13_0_12
v2: Remove unnecessary checks, used separate metrics time for
temperature metrics table(Lijo)
v3: Use cached values for back to back system metrics query(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add smu interface to get baseboard/gpuboard temperature metrics
v2: Rename is_support to is_supported(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain messages will processed with high priority by PMFW even if it
hasn't responded to a previous message. Send the priority message
regardless of the success/fail status of the previous message. Add
support on SMUv13.0.6 and SMUv13.0.12
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set ISP clocks for SMU v14.0.0. ISP driver
uses amdgpu_dpm_set_soft_freq_range() API to set clocks via
SMU interface than communicating with PMFW directly.
amdgpu_dpm_set_soft_freq_range() is updated to take in any
pp_clock_type than limiting to support only PP_SCLK to allow
ISP and other driver modules to set the min/max clocks. Any
clock specific restrictions are expected to be taken care in
SOC specific SMU implementations instead of generic amdgpu_dpm
and amdgpu_smu interfaces.
Reviewed-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set ISP power for SMU v14.0.0. ISP driver
uses amdgpu_dpm_set_powergating_by_smu() API to
enable / disable power via SMU interface than communicating
with PMFW directly.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_v13_0_display_clock_voltage_request() and
smu_v13_0_set_min_deep_sleep_dcefclk() were added in 2020 by
commit c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
but have remained unused.
Remove them.
smu_v13_0_display_clock_voltage_request() was the only user
of smu_v13_0_set_hard_freq_limited_range(). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last use of smu_v11_0_get_dpm_level_range() was removed in 2020 by
commit 46a301e14e ("drm/amd/powerplay: drop unnecessary Navi1x specific
APIs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill static metrics data for smu_v13_0_6
v2: Proceed with driver load just with warning even if board
voltage reads invalid value
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.2 and SMU v13.0.6 variants user may choose custom min/max
clocks in manual perf mode. Those custom min/max values need to be
reset once user switches to auto or restores default settings.
Otherwise, they may get used inadvertently during the next operation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update smu metrics table to vesrion 0x10 for smu_v13_0_6
v2: Host metrics support removal moved to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smu_v13_0_12 new messages & metrics table.
Static metrics table for frequency added, Separate metrics table
for smu_v13_0_12 added.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new function to check if the SMU supports resetting the SDMA engine.
This capability check ensures that the driver does not attempt to reset the SDMA engine
on hardware that does not support it.
The following changes are included:
- New function `amdgpu_dpm_reset_sdma_is_supported` to check SDMA reset
support at the AMDGPU driver level.
- New function `smu_reset_sdma_is_supported` to check SDMA reset support
at the SMU level.
- Implementation of `smu_v13_0_6_reset_sdma_is_supported` for the specific
SMU version v13.0.6.
- Updated `smu_v13_0_6_reset_sdma` to use the new capability check before
attempting to reset the SDMA engine.
v2: change smu_reset_sdma_is_supported type to bool (Tim)
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
