Add support to configure and retrieve ppt1 limit for smu_v13_0_12
v2: Add update_caps function and update ppt1 cap based on max ppt1
value, optimize the return values (Lijo)
v3: Add Null ptr check, return not supported in case of invalid
level/type (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu busy is a normal case when calling SMU_MSG_GetBadPageCount, so no need
to print error status at each time.Instead, only print error status when
timeout given by user is reached.
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
the driver should handle return value of smu_v13_0_6_printk_clk_levels()
to return the correct size for sysfs reads.
v2:
fix the issue of size calculation error in smu_v13_0_6_print_clks()
Fixes: cdfdec6f16 ("drm/amd/pm: Avoid writing nulls into `pp_od_clk_voltage`")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch extends the VCN_RESET capability check to include pgm 7 when the firmware version is 0x07551400 or newer.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling `smu_cmn_get_sysfs_buf` aligns the
offset used by `sysfs_emit_at` to the current page boundary, which was
previously directly returned from the various `print_clk_levels`
implementations to be added to the buffer position.
Instead, only the relative offset showing how much was written
to the buffer should be returned, regardless of how it was changed
for alignment purposes.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Ilya Zlobintsev <ilya.zlobintsev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable VCN reset capability for the program 4 as it's
causing regressions.
Fixes: 9d20f37a10 ("drm/amd/pm: Add VCN reset support for SMU v13.0.6")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW interface version is not used by some IP implementations like SMU
v13.0.6/12, instead rely on PMFW version checks. Avoid the log if
interface version is not used.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds support for VCN reset functionality in SMU v13.0.12 by:
1. Adding two new PPSMC messages in smu_v13_0_12_ppsmc.h:
- PPSMC_MSG_ResetVCN (0x5E)
- Updates PPSMC_Message_Count to 0x5F to account for new messages
2. Adding message mapping for ResetVCN in smu_v13_0_12_ppt.c:
- Maps SMU_MSG_ResetVCN to PPSMC_MSG_ResetVCN
These changes enable proper VCN reset handling through the SMU firmware
interface for compatible AMD GPUs.
v2: Added fw version check to support vcn queue reset.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch npm data from system metrics table for smu_v13_0_12
v3: Remove intermittent type for npm data, remove node id check,
move npm caps check to npm_get_data function (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for V13_0_6 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that V13_0_6 init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for SMU_V13 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that SMU_V13 init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using i2c_add_adapter() and i2c_del_adapter(), replace them
with devm_i2c_add_adapter() to simplify the i2c logic.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement caching separately for SystemMetrics table from PMFW. The same
table could be used for multiple interfaces. Hence, cache it internally
to avoid multiple queries to the firmware. For SystemMetrics table, 5ms
cache interval is sufficient.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the conditions for setting the SMU vcn reset caps in the SMU v13.0.6 PPT
initialization function. Specifically:
- Add support for VCN reset capability for firmware versions 0x00558200 and
above when the program version is 0.
- Add support for VCN reset capability for firmware versions 0x05551800 and
above when the program version is 5.
v2: correct the smu mp1 version for program 5 (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit implements VCN reset capability for SMU v13.0.6 with the following changes:
1. Added new PPSMC message ID (0x5B) for VCN reset in SMU firmware interface
2. Extended SMU capabilities to include VCN_RESET support
3. Implemented VCN reset support check:
- Added smu_v13_0_6_reset_vcn_is_supported() function
4. Updated SMU v13.0.6 PPT functions to include VCN reset operations
v2: clean up debug info (Alex)
v3: remove unsupported message and split smu v13.0.6 changes to a separate patch (Lijo)
v4: simply the function (smu_v13_0_6_reset_vcn_is_supported) (Lijo)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove caching logic of temperature metrics from SMUv13.0.12. The
caching logic needs to be moved to a higher level.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch system metrics table to fill gpuboard/baseboard temperature
metrics data for smu_v13_0_12
v2: Remove unnecessary checks, used separate metrics time for
temperature metrics table(Lijo)
v3: Use cached values for back to back system metrics query(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain messages will processed with high priority by PMFW even if it
hasn't responded to a previous message. Send the priority message
regardless of the success/fail status of the previous message. Add
support on SMUv13.0.6 and SMUv13.0.12
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cached metrics data validity is 1ms on aldebaran. It's not reasonable
for any client to query gpu_metrics at a faster rate and constantly
interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cached metrics data validity is 1ms on SMUv13.0.6 SOCs. It's not
reasonable for any client to query gpu_metrics at a faster rate and
constantly interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If dpm tables are already populated on SMU v13.0.6 SOCs, use the cached
data. Otherwise, fetch values from firmware.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
