Convert some of the intel_de_wait_custom() users over to
intel_de_wait_us(). We'll eventually want to eliminate
intel_de_wait_custom() as it's a hinderance towards using
poll_timeout_us().
This includes all the obvious cases where we only specify
a microsecond timeout to intel_de_wait_custom().
Done with cocci (with manual formatting fixes):
@@
expression display, reg, mask, value, timeout_us, out_value;
@@
- intel_de_wait_custom(display, reg, mask, value, timeout_us, 0, out_value)
+ intel_de_wait_us(display, reg, mask, value, timeout_us, out_value)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-6-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
intel_de_wait*() take the timeout in milliseconds. Include
that information in the function name to make life less
confusing. I'll also be introducing microsecond variants
of these later.
Done with cocci:
@@
@@
(
static int
- intel_de_wait
+ intel_de_wait_ms
(...)
{
...
}
|
static int
- intel_de_wait_fw
+ intel_de_wait_fw_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
(...)
{
...
}
)
@@
@@
(
- intel_de_wait
+ intel_de_wait_ms
|
- intel_de_wait_fw
+ intel_de_wait_fw_ms
|
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
|
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-4-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rename intel_shared_dpll to intel_dpll to represent both
shared and individual dplls. Since from MTL each PHY has it's
own PLL making the shared PLL naming a little outdated. In an
effort to make this framework accepting of future changes this
needs to be done.
--v2
-Use intel_dpll_global to make sure names start with the filename
[Jani/Ville]
-Explain the need of this rename [Jani]
--v3
-Just keep it intel_dpll [Jani]
--v4
-Fix comment [Jani]
-Use just num_dpll and dplls [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-7-suraj.kandpal@intel.com
Rename intel_shared_dpll_funcs to intel_dpll_funcs
since it needs to represent both shared and individual
dplls.
--v2
-Change intel_global_dpll to intel_dpll_global to be more
in line with the naming standard where the name should
start with the file name [Jani]
--v3
-Drop shared and global altogether [Jani]
--v4
-Keep declarations sorted [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250515071801.2221120-6-suraj.kandpal@intel.com
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and
accept a struct intel_display pointer, use that instead of struct
drm_i915_private pointer in display code.
This is done naively by running:
$ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \
$(find drivers/gpu/drm/i915/display -name "*.c")
and fixing the fallout, i.e. removing unused local i915 variables and
adding display variables where needed.
v2: Rebase
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we loop over all joined pipes and enable/disable the
shared dplls for each. We don't really have to do that since
all joined pipes will be using the same dpll. So let's just do
the enable/disable once for the whole set of joined pipes.
We can still keep tracking the dpll active set as pipes as long
as we remember to flip the bits for all the joined pipes on one go.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310183528.3203-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The dedicated display PHYs reset to a power state that blocks S0ix,
increasing idle system power. After a system reset (cold boot,
S3/4/5, warm reset) if a dedicated PHY is not being brought up
shortly, use these steps to move the PHY to the lowest power state
to save power.
1. Follow the PLL Enable Sequence, using any valid frequency such
as DP 1.62 GHz. This brings lanes out of reset and enables the
PLL to allow powerdown to be moved to the Disable state.
2. Follow PLL Disable Sequence. This moves powerdown to the Disable
state and disables the PLL.
v2: Rename WA function to more descriptive (Jani)
For PTL, only port A needs this wa
Add helpers to check presence of C10 phy and pll enabling (Imre)
v3: Rename wa function (Imre)
Check return value of C10 pll tables readout (Imre)
Use PLL request to check pll enabling (Imre)
v4: Move intel_cx0_pll_is_enabled() right after
intel_cx0_pll_disable() (Imre)
Add drm_WARN_ON() if C10 state cannot be calculated from
the tables (Imre)
v5: Add debug message on PLL enabling (Imre)
Add check for intel_encoder_is_dig_port() (Imre)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100019.740556-3-mika.kahola@intel.com
Use intel_display as an argument for intel_shared_dpll_init() and
replace drm_i915_private in function wherever possible.
While at it prefer using display->platform.xx over IS_PLATFORM.
Initialize dpio_phy and dpio_channel since with IS_GEMINILAKE()
and IS_BROXTON() compiler knows it will return false for xe but
since display->platform.xx is a runtime check which means the
compiler sees a potential path where uninitialized variables
could be accessed and raises a warning.
--v2
-Amend commit message to explain why some variables were
initialized [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-8-suraj.kandpal@intel.com
On the off chance that clock value ends up being too high (by means
of skl_ddi_calculate_wrpll() having been called with big enough
value of crtc_state->port_clock * 1000), one possible consequence
may be that the result will not be able to fit into signed int.
Fix this issue by moving conversion of clock parameter from kHz to Hz
into the body of skl_ddi_calculate_wrpll(), as well as casting the
same parameter to u64 type while calculating the value for AFE clock.
This both mitigates the overflow problem and avoids possible erroneous
integer promotion mishaps.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 82d3543701 ("drm/i915/skl: Implementation of SKL DPLL programming")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729174035.25727-1-n.zhandarovich@fintech.ru
struct intel_dpll_hw_state has a spot for all possible
PLL registers across all platforms (well, apart from
cx0/snps). This makes it rather confusing when trying to
figure out which members belong to which platform(s).
Split the struct up into five different platform specific
sub-structures. For now this will actually increase the size
a little bit as we have to duplicate a few members from
skl to icl, but that will be remedied soon when we turn
the thing into a union.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We have zero consistency in out PLL state naming scheme. Try
to unify things a bit by using 'dpll_hw_state' for high level
stuff and just 'hw_state' for low level stuff. Currently both
are the same, but I want to unionize intel_dpll_hw_state at
which point using different names can make it more clear whether
we're talking about the whole union or just the embedded platform
specific struct.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Since commit 0c65dc0626 ("drm/i915/jsl: s/JSL/JASPERLAKE for
platform/subplatform defines"), boot freezes on a Jasper Lake tablet
(Librem 11), usually with graphical corruption on the eDP display,
but sometimes just a black screen. This commit was included in 6.6 and
later.
That commit was intended to refactor EHL and JSL macros, but the change
to ehl_combo_pll_div_frac_wa_needed() started matching JSL incorrectly
when it was only intended to match EHL.
It replaced:
return ((IS_PLATFORM(i915, INTEL_ELKHARTLAKE) &&
IS_JSL_EHL_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
with:
return (((IS_ELKHARTLAKE(i915) || IS_JASPERLAKE(i915)) &&
IS_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
Remove IS_JASPERLAKE() to fix the regression.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Cc: stable@vger.kernel.org
Fixes: 0c65dc0626 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313135424.3731410-1-jonathon.hall@puri.sm
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
