intel_de_wait*() take the timeout in milliseconds. Include
that information in the function name to make life less
confusing. I'll also be introducing microsecond variants
of these later.
Done with cocci:
@@
@@
(
static int
- intel_de_wait
+ intel_de_wait_ms
(...)
{
...
}
|
static int
- intel_de_wait_fw
+ intel_de_wait_fw_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
(...)
{
...
}
|
static int
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
(...)
{
...
}
)
@@
@@
(
- intel_de_wait
+ intel_de_wait_ms
|
- intel_de_wait_fw
+ intel_de_wait_fw_ms
|
- intel_de_wait_for_set
+ intel_de_wait_for_set_ms
|
- intel_de_wait_for_clear
+ intel_de_wait_for_clear_ms
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251110172756.2132-4-ville.syrjala@linux.intel.com
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5afae707-c9aa-4a47-b726-5e1f1aa7a106@linux.intel.com
There is a hw restriction that we could enable the FBC for FP16
formats only if the pixel normalization block is enabled. Hence
enable the pixel normalizer block with normalzation factor as
1.0 for the supported FP16 formats to get the FBC enabled. Two
existing helper function definitions are moved up to avoid the
forward declarations as part of this patch as well.
v2: sw/hw state differentiation on handling pixel normalizer (Jani)
Bspec: 69863, 68881
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251027134001.325064-5-vinod.govindapillai@intel.com
The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
wa_22014263786 is not applicable to the BMG and hence exclude it
from the wa.
v2: Limit this wa to display verion 11 to 14, drop DG2 from the
exclusion list, use intel_display_wa (Lucas)
v3: simplify the wa handling loop (Jani)
Description of wa moved to place where wa is applied (Ville)
v4: drop the platforms line from wa comments (Lucas)
Bspec: 74212, 66624
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251007214317.875781-1-vinod.govindapillai@intel.com
The struct_mutex will be removed from the DRM subsystem, as it was a
legacy BKL that was only used by i915 driver. After review, it was
concluded that its usage was no longer necessary
This patch update a comment about struct_mutex in i915/display, in order
to prevent future misunderstandings.
* intel_fbc.c: Removed the statement that intel_fbc->lock is the inner
lock when overlapping with struct_mutex, since struct_mutex is no
longer used anywhere in the driver.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-7-luiz.mello@estudante.ufscar.br
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
WA:22010751166 does not apply past display version 12. Or, in
other words, the FBC restriction where FBC is disabled for
non-modulo 4 plane sizes (including plane size + yoffset) is fixed
from display version 13 and onwards. Relax the restriction for the same.
v4: Dropped redundant commit message
v3: Update comments for clarity (Jonathan Cavitt)
v2: Update the macro for display version check (Vinod)
Suggested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250904095338.300813-2-uma.shankar@intel.com
As per the wa_18038517565, we need to disable FBC compressor
clock gating before enabling FBC and enable after disabling
FBC. Placing the enabling of clock gating in the fbc deactivate
function can make the above wa logic go wrong in case of
frontbuffer rendering FBC mechanism. FBC deactivate can get
called during fb invalidate and then the corresponding FBC
activate can get called without properly disabling the clock
gating and can result in compression stalled. So move the
enable clock gating at the end of one FBC session after FBC
is completely disabled for a pipe.
Bspec: 74212, 72197, 69741, 65555
Fixes: 010363c461 ("drm/i915/display: implement wa_18038517565")
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250729124648.288497-1-vinod.govindapillai@intel.com
Create a new unordered workqueue to be used by the display code
instead of relying on the i915 one. Then move all the unordered works
used in the display code to use this new queue.
Since this is an unordered workqueue, by definition there can't be any
order dependency with non-display works, so no extra care is needed
in regard to that.
This is part of the effort to isolate the display code from i915.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250620091632.1256135-1-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are two panel_replay scenarios fbc wa need to be aware of,
panel replay with and without selective update capability.
Panel replay without selective update don't have any fbc wa.
So keep the fbc psr1 wa as it is.
The current fbc psr2 wa is mainly about selective fetch and we
need to apply the fbc wa if selective fetch is on - irrespective
of panel replay. Hence we can't exclude panel replay from the
fbc psr2 wa.
v1: keep panel_replay exclusion in PSR1 case (Jouni)
Patch description updated
Bspec: 66624, 50442
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321094529.197397-3-vinod.govindapillai@intel.com
During enabling FBC, for the very first frame, the prepare dirty
rect routine wouldnt have executed as at that time the plane
reference in the fbc_state would be NULL. So this could make
driver program some invalid entries as the damage area. Though
fbc hw ignores the dirty rect values programmed for the first
frame after enabling FBC, driver must ensure that valid dirty
rect coords are programmed. So ensure that for the first frame
correct dirty rect coords are updated to the HW.
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-10-vinod.govindapillai@intel.com
Dirty rectangle feature allows FBC to recompress a subsection
of a frame. When this feature is enabled, display will read
the scan lines between dirty rectangle start line and dirty
rectangle end line in subsequent frames.
Use the merged damage clip stored in the plane state to
configure the FBC dirty rect areas.
v2: - Move dirty rect handling to fbc state (Ville)
v3: - Use intel_fbc_dirty_rect_update_noarm (Ville)
- Split plane damage collection and dirty rect preparation
- Handle case where dirty rect fall outside the visible region
v4: - A state variable to check if we need to update dirty rect
registers in case intel_fbc_can_flip_nuke() (Ville)
v5: - No need to use a separate valid flag, updates to the
conditions for prepare damage rect (Ville)
- Usage of locks in fbc dirty rect related functions (Ville)
v6: - updates dirty rect handling (Ville)
v7: - Loop through all planes in atomic state is good enough (Ville)
Bspec: 68881, 71675, 73424
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-8-vinod.govindapillai@intel.com
If FBC is already active, we don't need to call FBC activate
routine again unless there are changes to the fences. So skip
this on all platforms that don't have fences. Any FBC register
updates done after enabling the dirty rect support in xe3 will
trigger nuke by FBC which is counter productive to the fbc
dirty rect feature.
The front buffer rendering sequence will call intel_fbc_flush()
and which will call intel_fbc_nuke() or intel_fbc_activate()
based on FBC status explicitly and won't get impacted by this
change.
v2: use HAS_FBC_DIRTY_RECT()
move this functionality within intel_fbc_activate()
v3: update to intel_fbc_activate logic (Ville)
update to the patch description
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-7-vinod.govindapillai@intel.com
Use x100, or ver * 100 + rel, versions for full IP version checks,
similar to what xe driver does:
- Replace IP_VER(14, 1) inline with 1401, etc.
- Convert DISPLAY_VER_FULL() to DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP()
This makes ver.rel versions easier to use, follows the xe driver
pattern, and drops the dependency on the IP_VER() macro.
v2: Rebase, drop IP_VER() from xe compat headers
v3: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
Use a forward declaration for struct cec_notifier instead of including
media/cec-notifier.h in intel_display_types.h, and only include it where
needed.
Also realize that a lot of places depend on including linux/debugfs.h
via intel_display_types.h -> media/cec-notifier.h -> media/cec.h, and
include that too where needed.
v2: hsw_ips.c also needs debugfs.h (kernel test robot)
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827104521.4151471-1-jani.nikula@intel.com
Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
