Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
Driver Changes:
Fixes/improvements/new stuff:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD (Janusz Krzysztofik)
- Use standard API for seqcount read in TLB invalidation [gt] (Andi Shyti)
Miscellaneous:
- Wait longer for threads in migrate selftest on CHV/BXT+VTD (Janusz Krzysztofik)
- Wait for page_sizes_gtt in gtt selftest on CHV/BXT+VTD (Janusz Krzysztofik)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patch.msgid.link/aRdXOAKlTVX_b0en@linux
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https://lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5afae707-c9aa-4a47-b726-5e1f1aa7a106@linux.intel.com
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
When running on a Cherryview, or on a Broxton with VTD enabled, pinning of
a VMA to GGTT is now committed asynchronously to avoid lock inversion
among reservation_ww and cpu_hotplug locks, the latter acquired from
stop_machine(). That may defer further processing of resources that
depend on that VMA. As a consequence, a 10ms delay in a multithreaded
migrate test case may occur too short and still incomplete threads may be
interrupted, and the test case may fail with -ERESTARTSYS or -EINTR error
code returned by any of those threads.
Extend the delay to empirically determined 100ms on affected platforms.
v3: Add an in-line comment that explains why 100ms (Andi).
v2: Fix spelling (Sebastian, Krzysztof),
- explain why VMA pinning is commited asynchronously on CHV/BXT+VTD
(Krzysztof).
Cc: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20251023082925.351307-7-janusz.krzysztofik@linux.intel.com
When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
If GuC hangs, the GuC logs might not contain enough information to
understand exactly why the hang occurred. In this case, we need to
look at the GuC HW state to try to understand where the GuC is stuck. It
is therefore useful to include the GuC HW state in the error capture.
The list of registers that are part of the GuC HW state can change based
on platform, but it is the same for all platforms from TGL to MTL so we
only need to support one version for i915.
v2: revised list
v3: remove confusing comment, use sizeof(u32) instead of 4 (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250909223621.3782625-2-daniele.ceraolospurio@intel.com
The struct_mutex will be removed from the DRM subsystem, as it was a
legacy BKL that was only used by i915 driver. After review, it was
concluded that its usage was no longer necessary
This patch updates various comments in the i915/gem and i915/gt
codebase to either remove or clarify references to struct_mutex, in
order to prevent future misunderstandings.
* i915_gem_execbuffer.c: Replace reference to struct_mutex with
vm->mutex, as noted in the eb_reserve() function, which states that
vm->mutex handles deadlocks.
* i915_gem_object.c: Change struct_mutex by
drm_i915_gem_object->vma.lock. i915_gem_object_unbind() in i915_gem.c
states that this lock is who actually protects the unbind.
* i915_gem_shrinker.c: The correct lock is actually i915->mm.obj, as
already documented in its declaration.
* i915_gem_wait.c: The existing comment already mentioned that
struct_mutex was no longer necessary. Updated to refer to a generic
global lock instead.
* intel_reset_types.h: Cleaned up the comment text. Updated to refer to
a generic global lock instead.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-6-luiz.mello@estudante.ufscar.br
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Remove the use of struct_mutex from intel_guc_log.c and replace it with
a dedicated lock, guc_lock, defined within the intel_guc_log struct.
The struct_mutex was previously used to protect concurrent access and
modification of intel_guc_log->level in intel_guc_log_set_level().
However, it was suggested that the lock should reside within the
intel_guc_log struct itself.
Initialize the new guc_lock in intel_guc_log_init_early(), alongside the
existing relay.lock. The lock is initialized using drmm_mutex_init(),
which also ensures it is properly destroyed when the driver is unloaded.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-5-luiz.mello@estudante.ufscar.br
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
Patch series "relayfs: misc changes", v5.
The series mostly focuses on the error counters which helps every user
debug their own kernel module.
This patch (of 5):
prev_padding represents the unused space of certain subbuffer. If the
content of a call of relay_write() exceeds the limit of the remainder of
this subbuffer, it will skip storing in the rest space and record the
start point as buf->prev_padding in relay_switch_subbuf(). Since the buf
is a per-cpu big buffer, the point of prev_padding as a global value for
the whole buffer instead of a single subbuffer (whose padding info is
stored in buf->padding[]) seems meaningless from the real use cases, so we
don't bother to record it any more.
Link: https://lkml.kernel.org/r/20250612061201.34272-1-kerneljasonxing@gmail.com
Link: https://lkml.kernel.org/r/20250612061201.34272-2-kerneljasonxing@gmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Yushan Zhou <katrinzhou@tencent.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is a sporadic failure to enable CTs ocurring in CI on one
specific machine that can't be reproduced locally. The driver already
supports dumping out a whole bunch of GuC related debug info on such a
failure but only when the verbose GuC debug config option is enabled.
It would be preferable to not enable all the verbose debug output. So
just bump the CT_DEAD code to regular I915 debug level rather than GUC
debug level, at least temporarily for CI.
To prevent excessive spam in other parts of CI, also add a check
against doing a CT_DEAD dump during an error injection test. No point
in dumping large amounts of 'why did this fail' info when the fail is
deliberately induced.
v2: Revert accidentally enabling some other verbose debug output.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250614030222.105601-1-John.C.Harrison@Intel.com
MEI GSC interrupt comes from i915. It has top half and bottom half.
Top half is called from i915 interrupt handler. It should be in
irq disabled context.
With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC
top half might be in threaded IRQ context. generic_handle_irq_safe API
could be called from either IRQ or process context, it disables local
IRQ then calls MEI GSC interrupt top half.
This change fixes A380/A770 GPU boot hang issue with RT kernel.
Fixes: 1e3dc1d862 ("drm/i915/gsc: add gsc as a mei auxiliary device")
Tested-by: Furong Zhou <furong.zhou@intel.com>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Link: https://lore.kernel.org/r/20250425151108.643649-1-junxiao.chang@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit dccf655f69)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
