Add support for Mali-G1 GPUs (CSF architecture v14), introducing a new
panthor_hw_arch_v14 entry with reset and L2 power management operations
via the PWR_CONTROL block.
Mali-G1 introduces a dedicated PWR_CONTROL block for managing resets and
power domains. panthor_gpu_info_init() is updated to use this block for
L2, tiler, and shader domain present register reads.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-9-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Add support for the 64-bit endpoint_req register introduced in CSF v4.0+
GPUs. Unlike a simple register widening, the 64-bit variant occupies the
next 64 bits after the original 32-bit field, requiring
version-dependent access.
This change introduces helper functions to read, write, and update the
endpoint_req register, ensuring correct handling on both pre-v4.0 and
v4.0+ firmwares.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-8-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Add support for the GLB_REQ.STATE field introduced in CSF v4.1+, which
replaces the HALT bit to provide finer control over the MCU state. This
change implements basic handling for transitioning the MCU between
ACTIVE and HALT states on Mali-G1 GPUs.
The update introduces new helpers to issue the state change requests,
poll for MCU halt completion, and restore the MCU to an active state
after halting.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Link: https://patch.msgid.link/20251125125548.3282320-7-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
A previous change, "drm/panthor: Fix UAF race between device unplug and
FW event processing", fixes a real issue where new work was unexpectedly
queued after cancellation. This was fixed by a disable instead.
Apply the same disable logic to other device level async work on device
unplug as a precaution.
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251029111412.924104-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Currently the Panthor driver needs the GPU to be powered down
between suspend and resume. If this is not done, then the
MCU_CONTROL register will be preserved as AUTO, which again will
cause a premature FW boot on resume. The FW will go directly into
fatal state in this case.
This case needs to be handled as there is no guarantee that the
GPU will be powered down after the suspend callback on all platforms.
The fix is to call panthor_fw_stop() in "pre-reset" path to ensure
the MCU_CONTROL register is cleared (set DISABLE). This matches
well with the already existing call to panthor_fw_start() from the
"post-reset" path.
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20251008105112.4077015-1-ketil.johnsen@arm.com
Mali-Gx15 introduces a new GPU_FEATURES register that provides
information about GPU-wide supported features. The register value will
be passed on to userspace via gpu_info.
Additionally, Mali-Gx15 presents an 'Immortalis' naming variant
depending on the shader core count and presence of Ray Intersection
feature support.
This patch adds:
- support for correctly identifying the model names for Mali-Gx15 GPUs.
- arch 11.8 FW binary support
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-5-karunika.choo@arm.com
Kernel BO's aren't exposed to UM, so labelling them is the responsibility
of the driver itself. This kind of tagging will prove useful in further
commits when want to expose these objects through DebugFS.
Expand panthor_kernel_bo_create() interface to take a NUL-terminated
string. No bounds checking is done because all label strings are given
as statically-allocated literals, but if a more complex kernel BO naming
scheme with explicit memory allocation and formatting was desired in the
future, this would have to change.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250423021238.1639175-4-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
MMU handler needs to be in control of the job interrupt clears because
clearing the interrupt also unblocks the writer/reader that triggered
the fault, and we don't want it to be unblocked until we've had a chance
to process the IRQ.
Since clearing the clearing is just one line, let's make it explicit
instead of doing it in the generic code path.
Note that this commit changes the existing behavior in that the MMU
COMPLETED irqs are no longer cleared, which is fine because they are
masked, so we're not risking an interrupt flood.
Changes in v3:
- Mention the fact we no longer clear MMU COMPLETED irqs
- Add Liviu's R-b
Changes in v2:
- Move the MMU_INT_CLEAR around
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250404080933.2912674-5-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
If we do a GPU soft-reset, that's no longer fast reset. This also means
the slow reset fallback doesn't work because the MCU state is only reset
after a GPU soft-reset.
Let's move the retry logic to panthor_device_resume() to issue a
soft-reset between the fast and slow attempts, and patch
panthor_gpu_suspend() to only power-off the L2 when a fast reset is
requested.
v3:
- No changes
v2:
- Add R-b
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211075419.2333731-6-boris.brezillon@collabora.com
Stop checking the FW halt_status as MCU_STATUS should be sufficient.
This should make the check for successful FW halt and subsequently
setting fast_reset to true more robust.
We should also clear GLB_REQ.GLB_HALT bit only on post-reset prior
to starting the FW and only if we're doing a fast reset, because
the slow reset will re-initialize all FW sections, including the
global interface.
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20241119135030.3352939-1-karunika.choo@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The system and GPU MMU page size might differ, which becomes a
problem for FW sections that need to be mapped at explicit addresses
since our PAGE_SIZE alignment might cover a VA range that's
expected to be used for another section.
Make sure we never map more than we need.
Changes in v3:
- Add R-bs
Changes in v2:
- Plan for per-VM page sizes so the MCU VM and user VM can
have different pages sizes
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030150231.768949-1-boris.brezillon@collabora.com
Contains everything that's FW related, that includes the code dealing
with the microcontroller unit (MCU) that's running the FW, and anything
related to allocating memory shared between the FW and the CPU.
A few global FW events are processed in the IRQ handler, the rest is
forwarded to the scheduler, since scheduling is the primary reason for
the FW existence, and also the main source of FW <-> kernel
interactions.
v6:
- Add Maxime's and Heiko's acks
- Keep header inclusion alphabetically ordered
v5:
- Fix typo in GLB_PERFCNT_SAMPLE definition
- Fix unbalanced panthor_vm_idle/active() calls
- Fallback to a slow reset when the fast reset fails
- Add extra information when reporting a FW boot failure
v4:
- Add a MODULE_FIRMWARE() entry for gen 10.8
- Fix a wrong return ERR_PTR() in panthor_fw_load_section_entry()
- Fix typos
- Add Steve's R-b
v3:
- Make the FW path more future-proof (Liviu)
- Use one waitqueue for all FW events
- Simplify propagation of FW events to the scheduler logic
- Drop the panthor_fw_mem abstraction and use panthor_kernel_bo instead
- Account for the panthor_vm changes
- Replace magic number with 0x7fffffff with ~0 to better signify that
it's the maximum permitted value.
- More accurate rounding when computing the firmware timeout.
- Add a 'sub iterator' helper function. This also adds a check that a
firmware entry doesn't overflow the firmware image.
- Drop __packed from FW structures, natural alignment is good enough.
- Other minor code improvements.
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229162230.2634044-9-boris.brezillon@collabora.com
