Since commit 94fe479fae ("drm/rcar-du: dsi: Clean up handling of DRM mode flags")
the driver does not set TXVMVPRMSET0R_VSPOL_LOW and TXVMVPRMSET0R_HSPOL_LOW
for modes which set neither DRM_MODE_FLAG_[PN].SYNC. The previous behavior
was to assume that neither flag means DRM_MODE_FLAG_N.SYNC . Restore the
previous behavior for maximum compatibility.
The change of behavior is visible below, consider Vertical mode->flags
for simplicity sake, although the same applies to Horizontal ones:
Before 94fe479fae ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") :
- DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0
- DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
- Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
After 94fe479fae ("drm/rcar-du: dsi: Clean up handling of DRM mode flags") :
- DRM_MODE_FLAG_PVSYNC => vprmset0r |= 0
- DRM_MODE_FLAG_NVSYNC => vprmset0r |= TXVMVPRMSET0R_VSPOL_LOW
- Neither DRM_MODE_FLAG_[PN]VSYNC => vprmset0r |= 0 <---------- This broke
The "Neither" case behavior is different, because DRM_MODE_FLAG_N[HV]SYNC is
really not equivalent !DRM_MODE_FLAG_P[HV]SYNC .
Fixes: 94fe479fae ("drm/rcar-du: dsi: Clean up handling of DRM mode flags")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251202181146.138365-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Introduce TXVMVPRMSET0R_BPP_MASK macro and use FIELD_PREP() to generate
appropriate bitfield from mask and value without bitshift, assign this
value into vprmset0r. Remove TXVMVPRMSET0R_CSPC_RGB which is never used,
replace it with code comment next to TXVMVPRMSET0R_CSPC_YCbCr.
Replace (mode->flags & DRM_MODE_FLAG_P.SYNC) test with inverted conditional
(mode->flags & DRM_MODE_FLAG_N.SYNC) and bitwise orr vprmset0r with either
or both TXVMVPRMSET0R_HSPOL_LOW and TXVMVPRMSET0R_VSPOL_LOW if conditional
matches.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-10-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cache DSI mode flags in new mode_flags member of struct rcar_mipi_dsi .
Configure TXVMSETR register based on the content of DSI mode flags in
case the controller operates in video mode.
Rename TXVMSETR_H..BPEN_EN to TXVMSETR_H..BPEN and drop TXVMSETR_H..BPEN_DIS
which resolves to 0. Update TXVMSETR_VSEN in the same manner. Replace
TXVMSETR_SYNSEQ_PULSES with a code comment next to TXVMSETR_SYNSEQ_EVENTS
because TXVMSETR_SYNSEQ_PULSES resolves to 0.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-9-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Implement support for DSI command transfer. Transmission of both Short
Packet and Long Packet is implemented, so is command transmission to
request response from peripheral device and transmission of non-read
command with BTA.
The AXI memory access mode is currently not implemented, each transfer
is performed purely using controller register interface. Short Packet
transfer can transfer up to 2 Bytes of data, Long Packet transfer can
transfer up to 16 Bytes of data.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250831190507.327848-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Remove fixed PPI lane count setup. The R-Car DSI host is capable
of operating in 1..4 DSI lane mode. Remove the hard-coded 4-lane
configuration from PPI register settings and instead configure
the PPI lane count according to lane count information already
obtained by this driver instance.
Configure TXSETR register to match PPI lane count. The R-Car V4H
Reference Manual R19UH0186EJ0121 Rev.1.21 section 67.2.2.3 Tx Set
Register (TXSETR), field LANECNT description indicates that the
TXSETR register LANECNT bitfield lane count must be configured
such, that it matches lane count configuration in PPISETR register
DLEN bitfield. Make sure the LANECNT and DLEN bitfields are
configured to match.
Fixes: 155358310f ("drm: rcar-du: Add R-Car DSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250813210840.97621-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
devm_drm_bridge_alloc() is the new API to be used for allocating (and
partially initializing) a private driver struct embedding a struct
drm_bridge.
For many drivers having a simple code flow in the probe function, this
commit does a mass conversion automatically with the following semantic
patch. The changes have been reviewed manually for correctness as well as
to find any false positives.
The patch has been applied with the explicit exclusion of bridge/panel.c,
handled by a separate patch.
After applying the semantic patch, manually fixed these issues:
- 4 drivers need ERR_CAST() instead of PTR_ERR() as the function calling
devm_drm_bridge_alloc() returns a pointer
- re-added empty lines and comments that the script had removed but that
should stay
@@
type T;
identifier C;
identifier BR;
expression DEV;
expression FUNCS;
@@
-T *C;
+T *C;
...
(
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return -ENOMEM;
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
|
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return ERR_PTR(-ENOMEM);
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
)
...
-C->BR.funcs = FUNCS;
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> # microchip-lvds.c
Reviewed-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Tested-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-2-b8bc1f16d7aa@bootlin.com
[Luca: fixed trivial patch conflict in adv7511_drv.c while applying]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas needs 5a498d4d06 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Add additional pixel formats for which blending is disabled when
DRM_MODE_BLEND_PIXEL_NONE is set.
Refactor the fourcc selection into a separate function to handle the
increased number of formats.
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The (large) rcar_du_modeset_init() function can fail for many reasons,
two of two involving probe deferral. Use dev_err_probe() in those code
paths to record the cause of the probe deferral, in order to help
debugging probe issues.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
