The only reason for the ssd130x-spi driver to have an spi_device_id table
is that the SPI core always reports an "spi:" MODALIAS, even when the SPI
device has been registered via a Device Tree Blob.
Without spi_device_id table information in the module's metadata, module
autoloading would not work because there won't be an alias that matches
the MODALIAS reported by the SPI core.
This spi_device_id table is not needed for device matching though, since
the of_device_id table is always used in this case. For this reason, the
struct spi_driver .id_table member is currently not set in the SPI driver.
Because the spi_device_id table is always required for module autoloading,
the SPI core checks during driver registration that both an of_device_id
table and a spi_device_id table are present and that they contain the same
entries for all the SPI devices.
Not setting the .id_table member in the driver then confuses the core and
leads to the following warning when the ssd130x-spi driver is registered:
[ 41.091198] SPI driver ssd130x-spi has no spi_device_id for sinowealth,sh1106
[ 41.098614] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1305
[ 41.105862] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1306
[ 41.113062] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1307
[ 41.120247] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1309
[ 41.127449] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1322
[ 41.134627] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1325
[ 41.141784] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1327
[ 41.149021] SPI driver ssd130x-spi has no spi_device_id for solomon,ssd1331
To prevent the warning, set the .id_table even though it's not necessary.
Since the check is done even for built-in drivers, drop the condition to
only define the ID table when the driver is built as a module. Finally,
rename the variable to use the "_spi_id" convention used for ID tables.
Fixes: 74373977d2 ("drm/solomon: Add SSD130x OLED displays SPI support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231114516.2063201-1-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
The solomon driver specifies a preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-60-tzimmermann@suse.de
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Pass an instance of struct drm_format_conv_state to DRM's format
conversion helpers. Update all callers.
Most drivers can use the format-conversion state from their shadow-
plane state. The shadow plane's destroy function releases the
allocated buffer. Drivers will later be able to allocate a buffer
of appropriate size in their plane's atomic_check code.
The gud driver uses a separate thread for committing updates. For
now, the update worker contains its own format-conversion state.
Images in the format-helper tests are small. The tests preallocate
a static page for the temporary buffer. Unloading the module releases
the memory.
v6:
* update patch for ssd132x support
v5:
* avoid using unusupported shadow-plane state in repaper (Noralf)
* fix documentation (Noralf, kernel test robot)
v3:
* store buffer in shadow-plane state (Javier, Maxime)
* replace ARRAY_SIZE() with sizeof() (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com> # ssd130x
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009141018.11291-4-tzimmermann@suse.de
The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327)
are used by 16 grayscale dot matrix OLED panels, extend the driver to also
support this chip family.
Instead adding an indirection level to allow the same modesetting pipeline
to be used by both controller families, add another pipeline for SSD132x.
This leads to some code duplication but it makes the driver easier to read
and reason about. Once other controller families are added (e.g: SSD133x),
some common code can be factored out in driver helpers to be shared by the
different families. But that can be done later once these patterns emerge.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-5-javierm@redhat.com
This deemed useful to avoid hardcoding a page height and allow to support
other Solomon controller families, but dividing the screen in pages seems
to be something that is specific to the SSD130x chip family.
For example, SSD132x chip family divides the screen in segments (columns)
and common outputs (rows), so the concept of screen pages does not exist
for the SSD132x family.
Let's drop this field from the device info struct and just use a constant
SSD130X_PAGE_HEIGHT macro to define the page height. While being there,
replace hardcoded 8 values in places where it is used as the page height.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-2-javierm@redhat.com
The plane's atomic_check returns -EINVAL if the CRTC has not been
set. This is the case for disabled planes, for which atomic_check
should return 0. For disabled planes, it also omits the mandatory
call to drm_atomic_helper_check_plane_state().
Replace the test with the boiler-plate code that first invokes
drm_atomic_helper_check_plane_state() and then tests for the plane
to be visible. Return early for non-visible planes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d51f9fbd98 ("drm/ssd130x: Store the HW buffer in the driver-private CRTC state")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009141018.11291-7-tzimmermann@suse.de
The driver uses a naming convention where functions for struct drm_*_funcs
callbacks are named ssd130x_$object_$operation, while the callbacks for
struct drm_*_helper_funcs are named ssd130x_$object_helper_$operation.
The idea is that this helper_ prefix in the function names denote that are
for struct drm_*_helper_funcs callbacks. This convention was copied from
other drivers when ssd130x was written, but Maxime pointed out that is the
exception rather than the norm.
So let's get rid of the _helper prefixes from the function handlers names.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914195138.1518065-1-javierm@redhat.com
The commit 45b58669e5 ("drm/ssd130x: Allocate buffer in the plane's
.atomic_check() callback") moved the allocation of the intermediate and
HW buffers from the encoder's .atomic_enable callback, to the plane's
.atomic_check callback.
This was suggested by Maxime Ripard, because drivers aren't allowed to
fail after the drm_atomic_helper_swap_state() function has been called.
And the encoder's .atomic_enable happens after the new atomic state has
been swapped, so allocations (that can fail) shouldn't be done there.
But the HW buffer isn't really tied to the plane's state. It has a fixed
size that only depends on the (also fixed) display resolution defined in
the Device Tree Blob.
That buffer can be considered part of the CRTC state, and for this reason
makes more sense to do its allocation in the CRTC .atomic_check callback.
The other allocated buffer (used to store a conversion from the emulated
XR24 format to the native R1 format) is part of the plane's state, since
it will be optional once the driver supports R1 and allows user-space to
set that pixel format.
So let's keep the allocation for it in the plane's .atomic_check callback,
this can't be moved to the CRTC's .atomic_check because changing a format
does not trigger a CRTC mode set.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdWv_QSatDgihr8=2SXHhvp=icNxumZcZOPwT9Q_QiogNQ@mail.gmail.com/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913052938.1114651-1-javierm@redhat.com
The commit 45b58669e5 ("drm/ssd130x: Allocate buffer in the plane's
.atomic_check() callback") moved the buffers allocation to be done in
the primary plane's .atomic_check() callback.
But it missed that since the driver uses a shadow-buffered plane, the
__drm_gem_{reset,duplicate,destroy}_shadow_plane() helper functions
must be used in the struct drm_plane_funcs handlers.
This was missed because the mentioned commit did not remove the macro
DRM_GEM_SHADOW_PLANE_FUNCS, which leads to the custom plane's atomic
state management handlers to not be used.
Fixes: 45b58669e5 ("drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/dri-devel/20230727122412.2464210-1-arnd@kernel.org
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727140453.577445-1-javierm@redhat.com
Drivers are not allowed to fail after drm_atomic_helper_swap_state() has
been called and the new atomic state is stored into the current sw state.
Since the struct ssd130x_device .data_array is allocated in the encoder's
.atomic_enable callback, the operation can fail and this is after the new
state has been stored. So it can break an atomic mode settings assumption.
Fix this by having custom helpers to allocate, duplicate and destroy the
plane state, that will take care of allocating and freeing these buffers.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726105433.389740-2-javierm@redhat.com
The commit e254b584db ("drm/ssd130x: Remove hardcoded bits-per-pixel in
ssd130x_buf_alloc()") used a pixel format info rather than a hardcoded bpp
to calculate the size of the buffer allocated to store the native pixels.
But it wrongly used the DRM_FORMAT_C1 fourcc pixel format. That is for
color-indexed frame buffer formats, while the ssd103x controllers don't
support different single-channel colors nor a Color Lookup Table (CLUT).
So the correct pixel format to use in this case is DRM_FORMAT_R1 instead.
Since both formats use a eight pixels/byte, there is no functional change
in practice by this patch. Still, the correct pixel format should be used.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713085859.907127-1-javierm@redhat.com
The driver only supports OLED controllers that have a native DRM_FORMAT_C1
pixel format and that is why it has harcoded a division of the width by 8.
But the driver might be extended to support devices that have a different
pixel format. So it's better to use the struct drm_format_info helpers to
compute the size of the buffer, used to store the pixels in native format.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609170941.1150941-6-javierm@redhat.com
The resolutions for these panels are fixed and defined in the Device Tree,
so there's no point to allocate the buffers on each plane update and that
can just be done once.
Let's do the allocation and free on the encoder enable and disable helpers
since that's where others initialization and teardown operations are done.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609170941.1150941-5-javierm@redhat.com
Currently the driver hardcodes the default values to 96x16 pixels but this
default resolution depends on the controller. The datasheets for the chips
describes the following display controller resolutions:
- SH1106: 132 x 64 Dot Matrix OLED/PLED
- SSD1305: 132 x 64 Dot Matrix OLED/PLED
- SSD1306: 128 x 64 Dot Matrix OLED/PLED
- SSD1307: 128 x 39 Dot Matrix OLED/PLED
- SSD1309: 128 x 64 Dot Matrix OLED/PLED
Add this information to the devices' info structures, and use it set as a
default if not defined in DT rather than hardcoding to an arbitrary value.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609170941.1150941-2-javierm@redhat.com
