The current attempted split between xe/i915 vs. display
for intel_frontbuffer is a mess:
- the i915 rcu leaks through the interface to the display side
- the obj->frontbuffer write-side is now protected by a display
specific spinlock even though the actual obj->framebuffer
pointer lives in a i915 specific structure
- the kref is getting poked directly from both sides
- i915_active is still on the display side
Clean up the mess by moving everything about the frontbuffer
lifetime management to the i915/xe side:
- the rcu usage is now completely contained in i915
- frontbuffer_lock is moved into i915
- kref is on the i915/xe side (xe needs the refcount as well
due to intel_frontbuffer_queue_flush()->intel_frontbuffer_ref())
- the bo (and its refcounting) is no longer on the display side
- i915_active is contained in i915
I was pondering whether we could do this in some kind of smaller
steps, and perhaps we could, but it would probably have to start
with a bunch of reverts (which for sure won't go cleanly anymore).
So not convinced it's worth the hassle.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-10-ville.syrjala@linux.intel.com
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
Let's gradually start calling i915 and xe parent, or core, drivers from
display via function pointers passed at display probe.
Going forward, the struct intel_display_parent_interface is expected to
include const pointers to sub-structs by functionality, for example:
struct intel_display_rpm {
struct ref_tracker *(*get)(struct drm_device *drm);
/* ... */
};
struct intel_display_parent_interface {
/* ... */
const struct intel_display_rpm *rpm;
};
This is a baby step towards not building display as part of both i915
and xe drivers, but rather making it an independent driver interfacing
with the two.
v3: useless include additions dropped
v2: unrelated include removal dropped
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-2-jouni.hogander@intel.com
Driver Changes:
More xe3p support (Harish, Brian, Balasubramani, Matt Roper)
Make panic support work on VRAM for display (Maarten)
Fix stolen size check (Shuicheng)
xe_pci_test update (Gustavo)
VF migration updates (Tomasz)
A couple of fixes around allocation and PM references (Matt Brost)
Migration update for the MEM_COPY instruction (Matt Auld)
Initial CRI support (Balasubramani, Matt Roper)
Use SVM range helpers in PT layer (Matt Brost)
Drop MAX_GT_TYPE_CHARS constant (Matt Roper)
Fix spelling and typos (Sanjay)
Fix VF FLR synchronization between all GTs (Michal)
Add a Workaround (Nitin)
Access VF's register using dedicated MMIO view (Michal)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aQCl9uJxN6CWJ8Vg@fedora
The display part of Wa_22019338487 (i.e., avoiding use of stolen memory)
is using a platform test rather than an graphics/media IP test. Since
this workaround is focused on non-GT uses of stolen memory, it makes
sense that we'd want to still apply the workaround on affected platforms
even if the GTs themselves are disabled via configfs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-38-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Display interrupt handling has no relation to GT(s) on the platforms
supported by the Xe driver. We only call xe_display_irq_postinstall
with the first tile's primary GT, so the single condition that uses the
GT pointer within the function always evaluates to true. Drop the
unnecessary parameter and the condition.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-27-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The display driver needs to get from the struct drm_device pointer to
the struct intel_display pointer. Currently, this depends on knowledge
of the struct drm_i915_private and struct xe_device definitions, but
we'd like to hide those definitions from display.
Require the struct drm_device and struct intel_display * members within
struct drm_i915_private and struct xe_device to be placed next to each
other, to be able to figure out the display pointer without knowledge of
the structures.
Use a generic dummy device structure to define the relative offsets of
the drm and display members, and add static assertions to ensure this
holds for both i915 and xe. Use the dummy structure to do the pointer
chase from struct drm_device * to struct intel_display *.
This requires moving the display member in struct xe_device after the
drm member.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250926111032.1188876-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
Introduce an xe_bo_create_pin_map_novm() function that does not
take the drm_exec paramenter to simplify the conversion of many
callsites.
For the rest, ensure that the same drm_exec context that was used
for locking the vm is passed down to validation.
Use xe_validation_guard() where appropriate.
v2:
- Avoid gotos from within xe_validation_guard(). (Matt Brost)
- Break out the change to pf_provision_vf_lmem8 to a separate
patch.
- Adapt to signature change of xe_validation_guard().
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-12-thomas.hellstrom@linux.intel.com
Most users of xe_bo_create_pin_map_at() and
xe_bo_create_pin_map_at_aligned() are not using the vm parameter,
and that simplifies conversion. Introduce an
xe_bo_create_pin_map_at_novm() function and make the _aligned()
version static. Use xe_validation_guard() for conversion.
v2:
- Adapt to signature change of xe_validation_guard(). (Matt Brost)
- Fix up documentation.
v4:
- Postpone the change to i915_gem_stolen_insert_node_in_range() to
a later patch.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-11-thomas.hellstrom@linux.intel.com
The CPU fault handler may populate bos and migrate, and in doing
so might interfere with other tasks validating.
Rework the CPU fault handler completely into a fastpath
and a slowpath. The fastpath trylocks only the validation lock
in read-mode. If that fails, there's a fallback to the
slowpath, where we do a full validation transaction.
This mandates open-coding of bo locking, bo idling and
bo populating, but we still call into TTM for fault
finalizing.
v2:
- Rework the CPU fault handler to actually take part in
the exhaustive eviction scheme (Matthew Brost).
v3:
- Don't return anything but VM_FAULT_RETRY if we've dropped the
mmap_lock. Not even if a signal is pending.
- Rebase on gpu_madvise() and split out fault migration.
- Wait for idle after migration.
- Check whether the resource manager uses tts to determine
whether to map the tt or iomem.
- Add a number of asserts.
- Allow passing a ttm_operation_ctx to xe_bo_migrate() so that
it's possible to try non-blocking migration.
- Don't fall through to TTM on migration / population error
Instead remove the gfp_retry_mayfail in mode 2 where we
must succeed. (Matthew Brost)
v5:
- Don't allow faulting in the imported bo case (Matthew Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthews Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-7-thomas.hellstrom@linux.intel.com
We want all validation (potential backing store allocation) to be part
of a drm_exec transaction. Therefore add a drm_exec pointer argument
to xe_bo_validate() and ___xe_bo_create_locked(). Upcoming patches
will deal with making all (or nearly all) calls to these functions
part of a drm_exec transaction. In the meantime, define special values
of the drm_exec pointer:
XE_VALIDATION_UNIMPLEMENTED: Implementation of the drm_exec transaction
has not been done yet.
XE_VALIDATION_UNSUPPORTED: Some Middle-layers (dma-buf) doesn't allow
the drm_exec context to be passed down to map_attachment where
validation takes place.
XE_VALIDATION_OPT_OUT: May be used only for kunit tests where exhaustive
eviction isn't crucial and the ROI of converting those is very
small.
For XE_VALIDATION_UNIMPLEMENTED and XE_VALIDATION_OPT_OUT there is also
a lockdep check that a drm_exec transaction can indeed start at the
location where the macro is expanded. This is to encourage
developers to take this into consideration early in the code
development process.
v2:
- Fix xe_vm_set_validation_exec() imbalance. Add an assert that
hopefully catches future instances of this (Matt Brost)
v3:
- Extend to psmi_alloc_object
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v3
Link: https://lore.kernel.org/r/20250908101246.65025-2-thomas.hellstrom@linux.intel.com
Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
