The display part of Wa_22019338487 (i.e., avoiding use of stolen memory)
is using a platform test rather than an graphics/media IP test. Since
this workaround is focused on non-GT uses of stolen memory, it makes
sense that we'd want to still apply the workaround on affected platforms
even if the GTs themselves are disabled via configfs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-38-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
Most users of xe_bo_create_pin_map_at() and
xe_bo_create_pin_map_at_aligned() are not using the vm parameter,
and that simplifies conversion. Introduce an
xe_bo_create_pin_map_at_novm() function and make the _aligned()
version static. Use xe_validation_guard() for conversion.
v2:
- Adapt to signature change of xe_validation_guard(). (Matt Brost)
- Fix up documentation.
v4:
- Postpone the change to i915_gem_stolen_insert_node_in_range() to
a later patch.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250908101246.65025-11-thomas.hellstrom@linux.intel.com
Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently we pre-compute the plane surface/base address
partially (only for cursor_needs_physical cases) in
intel_plane_pin_fb() and finish the calculation in the
plane->update_arm(). Let's just precompute the whole thing
instead.
One benefit is that we get rid of all the vma offset stuff
from the low level plane code. Another use I have in mind
is including the surface address in the plane tracepoints,
which should make it easier to analyze display faults.
v2: Deal with xe reuse_vma() hacks
v3: use intel_plane_ggtt_offset() still in reuse_vma()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250717203216.31258-1-ville.syrjala@linux.intel.com
drm/i915 feature pull for v6.17:
Features and functionality:
- Add support for DSC fractional link bpp on DP MST (Imre)
- Add support for simultaneous Panel Replay and Adaptive Sync (Jouni)
- Add support for PTL+ double buffered LUT registers (Chaitanya, Ville)
- Add PIPEDMC event handling in preparation for flip queue (Ville)
Refactoring and cleanups:
- Rename lots of DPLL interfaces to unify them (Suraj)
- Allocate struct intel_display dynamically (Jani)
- Abstract VLV IOSF sideband better (Jani)
- Use str_true_false() helper (Yumeng Fang)
- Refactor DSB code in preparation for flip queue (Ville)
- Use drm_modeset_lock_assert_held() instead of open coding (Luca)
- Remove unused arg from skl_scaler_get_filter_select() (Luca)
- Split out a separate display register header (Jani)
- Abstract DRAM detection better (Jani)
- Convert LPT/WPT SBI sideband to struct intel_display (Jani)
Fixes:
- Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu)
- Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit)
- Fix error path for xe display workqueue allocation (Haoxiang Li)
- Disable DP AUX access probe where not required (Imre)
- Fix DKL PHY access if the port is invalid (Luca)
- Fix PSR2_SU_STATUS access on ADL+ (Jouni)
- Add sanity checks for porch and sync on BXT/GLK DSI (Ville)
DRM core changes:
- Change AUX DPCD access probe address (Imre)
- Refactor EDID quirks, amd make them available to drivers (Imre)
- Add quirk for DPCD access probe (Imre)
- Add DPCD definitions for Panel Replay capabilities (Jouni)
Merges:
- Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/fff9f231850ed410bd81b53de43eff0b98240d31@intel.com
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/m3gbuh32wgiep43i4zxbyhxqbenvtgvtao5sczivlasj7tikwv@dmlba4bfg2ny
Currently i915_gem_object_pin_to_display_plane() uses
i915_gem_object_get_tile_row_size() to calculate the tile row
size for the VT-d guard w/a. That's not really proper since
i915_gem_object_get_tile_row_size() only works for fenced BOs,
nor does it take rotation into account.
Remedy the situation by calculating the VT-d guard size in the
display code where we have more information readily available.
Although the default guard size (168 PTEs now) should cover
the more typical fb size use cases anyway, and only very large
Y/Yf-tiled framebuffers might have tile row size that exceeds it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122151755.6928-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We're changing the driver to have no interrupts during early init for
Xe, so we poll the PIPE_FRMSTMSMP counter instead.
Interrupts cannot be enabled during FB readout because memirq's requires
an allocation. This would overwrite the FB we want to read out.
While it might be possible to also run do the same in i915 and run
it without interrupts, the platforms i915 supports had a less clear
distinction between display and graphics. For this reason I choose
only to touch Xe for now.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121142850.4960-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
We need to be able to do both MMIO and DSB based pipe/plane
programming. To that end plumb the 'dsb' all way from the top
into the plane commit hooks.
The compiler appears smart enough to combine the branches from
all the back-to-back register writes into a single branch.
So the generated asm ends up looking more or less like this:
plane_hook()
{
if (dsb) {
intel_dsb_reg_write();
intel_dsb_reg_write();
...
} else {
intel_de_write_fw();
intel_de_write_fw();
...
}
}
which seems like a reasonably efficient way to do this.
An alternative I was also considering is some kind of closure
(register write function + display vs. dsb pointer passed to it).
That does result is smaller code as there are no branches anymore,
but having each register access go via function pointer sounds
less efficient.
Not that I actually measured the overhead of either approach yet.
Also the reg_rw tracepoint seems to be making a huge mess of the
generated code for the mmio path. And additionally there's some
kind of IS_GSI_REG() hack in __raw_uncore_read() which ends up
generating a pointless branch for every mmio register access.
So looks like there might be quite a bit of room for improvement
in the mmio path still.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170415.23841-12-ville.syrjala@linux.intel.com
drm-xe-next for 6.12
UAPI Changes:
- Rename xe perf layer as xe observation layer, but was
also made available via fixes to previous verison (Ashutosh)
- Use write-back caching mode for system memory on DGFX,
but was also mad available via fixes to previous version (Thomas)
- Expose SIMD16 EU mask in topology query for userspace to know
the type of EU, as available in PVC, Lunar Lake and Battlemage
(Lucas)
- Return ENOBUFS instead of ENOMEM in vm_bind if failure is tied
to an array of binds (Matthew Brost)
Driver Changes:
- Log cleanup moving messages to debug priority (Michal Wajdeczko)
- Add timeout to fences to adhere to dma_buf rules (Matthew Brost)
- Rename old engine nomenclature to exec_queue (Matthew Brost)
- Convert multiple bind ops to 1 job (Matthew Brost)
- Add error injection for vm bind to help testing error path
(Matthew Brost)
- Fix error handling in page table to propagate correctly
to userspace (Matthew Brost)
- Re-organize and cleanup SR-IOV related registers (Michal Wajdeczko)
- Make the device write barrier compatible with VF (Michal Wajdeczko)
- New display workarounds for Battlemage (Matthew Auld)
- New media workarounds for Lunar Lake and Battlemage (Ngai-Mint Kwan)
- New graphics workarounds for Lunar Lake (Bommu Krishnaiah)
- Tracepoint updates (Matthew Brost, Nirmoy Das)
- Cleanup the header generation for OOB workarounds (Lucas De Marchi)
- Fix leaking HDCP-related object (Nirmoy Das)
- Serialize L2 flushes to avoid races (Tejas Upadhyay)
- Log pid and comm on job timeout (José Roberto de Souza)
- Simplify boilerplate code for live kunit (Michal Wajdeczko)
- Improve kunit skips for live kunit (Michal Wajdeczko)
- Fix xe_sync cleanup when handling xe_exec ioctl (Ashutosh Dixit)
- Limit fair VF LMEM provisioning (Michal Wajdeczko)
- New workaround to fence mmio writes in Lunar Lake (Tejas Upadhyay)
- Warn on writes inaccessible register in VF (Michal Wajdeczko)
- Fix register lookup in VF (Michal Wajdeczko)
- Add GSC support for Battlemage (Alexander Usyskin)
- Fix wedging only the GT in which timeout occurred (Matthew Brost)
- Block device suspend when wedging (Matthew Brost)
- Handle compression and migration changes for Battlemage
(Akshata Jahagirdar)
- Limit access of stolen memory for Lunar Lake (Uma Shankar)
- Fail invalid addresses during user fence creation (Matthew Brost)
- Refcount xe_file to safely and accurately store fdinfo stats
(Umesh Nerlige Ramappa)
- Cleanup and fix PM reference for TLB invalidation code
(Matthew Brost)
- Fix PM reference handling when communicating with GuC (Matthew Brost)
- Add new BO flag for 2 MiB alignement and use in VF (Michal Wajdeczko)
- Simplify MMIO setup for multi-tile platforms (Lucas De Marchi)
- Add check for uninitialized access to OOB workarounds
(Lucas De Marchi)
- New GSC and HuC firmware blobs for Lunar Lake and Battlemage
(Daniele Ceraolo Spurio)
- Unify mmio wait logic (Gustavo Sousa)
- Fix off-by-one when processing RTP rules (Lucas De Marchi)
- Future-proof migrate logic with compressed PAT flag (Matt Roper)
- Add WA kunit tests for Battlemage (Lucas De Marchi)
- Test active tracking for workaorunds with kunit (Lucas De Marchi)
- Add kunit tests for RTP with no actions (Lucas De Marchi)
- Unify parse of OR rules in RTP (Lucas De Marchi)
- Add performance tuning for Battlemage (Sai Teja Pottumuttu)
- Make bit masks unsigned (Geert Uytterhoeven)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/k7xuktfav4zmtxxjr77glu2hszypvzgmzghoumh757nqfnk7kn@ccfi4ts3ytbk
As per recommendation in the workarounds:
WA_22019338487
There is an issue with accessing Stolen memory pages due a
hardware limitation. Limit the usage of stolen memory for
fbdev for LNL+. Don't use BIOS FB from stolen on LNL+ and
assign the same from system memory.
v2: Corrected the WA Number, limited WA to LNL and
Adopted XE_WA framework as suggested by Lucas and Matt.
v3: Introduced the waxxx_display to implement display side
of WA changes on Lunarlake. Used xe_root_mmio_gt and
avoid the for loop (Suggested by Lucas)
v4: Fixed some nits (Luca)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717082252.3875909-1-uma.shankar@intel.com
Different hardware generations have different scanout alignment
requirements. Introduce a new vfunc that will allow us to
make that distinction without horrible if-ladders.
For now we directly plug in the existing intel_surf_alignment()
and intel_cursor_alignment() functions.
For fbdev we (temporarily) introduce intel_fbdev_min_alignment()
that simply queries the alignment from the primary plane of
the first crtc.
TODO: someone will need to fix xe's alignment handling
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-4-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The flags stored in the BO grew over time without following
much a naming pattern. First of all, get rid of the _BIT suffix that was
banned from everywhere else due to the guideline in
drivers/gpu/drm/i915/i915_reg.h that xe kind of follows:
Define bits using ``REG_BIT(N)``. Do **not** add ``_BIT`` suffix to the name.
Here the flags aren't for a register, but it's good practice to keep it
consistent.
Second divergence on names is the use or not of "CREATE". This is
because most of the flags are passed to xe_bo_create*() family of
functions, changing its behavior. However, since the flags are also
stored in the bo itself and checked elsewhere in the code, it seems
better to just omit the CREATE part.
With those 2 guidelines, all the flags are given the form
XE_BO_FLAG_<FLAG_NAME> with the following commands:
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i \
-e "s/XE_BO_\([_A-Z0-9]*\)_BIT/XE_BO_\1/g" \
-e 's/XE_BO_CREATE_/XE_BO_FLAG_/g'
git grep -le "XE_BO_" -- drivers/gpu/drm/xe | xargs sed -i -r \
-e 's/XE_BO_(DEFER_BACKING|SCANOUT|FIXED_PLACEMENT|PAGETABLE|NEEDS_CPU_ACCESS|NEEDS_UC|INTERNAL_TEST|INTERNAL_64K|GGTT_INVALIDATE)/XE_BO_FLAG_\1/g'
And then the defines in drivers/gpu/drm/xe/xe_bo.h are adjusted to
follow the coding style.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322142702.186529-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
On MTL the GOP (for whatever reason) likes to bind its framebuffer
high up in the ggtt address space. This can conflict with whatever
ggtt_reserve_guc_top() is trying to do, and the result is that
ggtt_reserve_guc_top() fails and then we proceed to explode when
trying to tear down the driver. Thus far I haven't analyzed what
causes the actual fireworks, but it's not super important as even
if it didn't explode we'd still fail the driver load and the user
would be left with an unusable GPU.
To remedy this (without having to figure out exactly what
ggtt_reserve_guc_top() is trying to achieve) we can attempt to
relocate the BIOS framebuffer to a lower ggtt address. We can do
this at this early point in driver init because nothing else is
supposed to be clobbering the ggtt yet. So we simply change where
in the ggtt we pin the vma, the original PTEs will be left as is,
and the new PTEs will get written with the same dma addresses.
The plane will keep on scanning out from the original PTEs until
we are done with the whole process, and at that point we rewrite
the plane's surface address register to point at the new ggtt
address.
Since we don't need a specific ggtt address for the plane
(apart from needing it to land in the mappable region for
normal stolen objects) we'll just try to pin it without a fixed
offset first. It should end up at the lowest available address
(which really should be 0 at this point in the driver init).
If that fails we'll fall back to just pinning it exactly to the
origianal address.
To make sure we don't accidentlally pin it partially over the
original ggtt range (as that would corrupt the original PTEs)
we reserve the original range temporarily during this process.
v2: Try to pin explicitly to ggtt offset 0 as otherwise DG2 puts it
even higher (atm we have no PIN_LOW flag to force it low)
v3: "fix" xe
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-16-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently we assume that we bind the BIOS fb exactly into the same
ggtt address where the BIOS left it. That is about to change, and
in order to keep intel_reuse_initial_plane_obj() working as intended
we need to compare the original ggtt offset (called 'base' here)
as opposed to the actual vma ggtt offset we selected. Otherwise
the first plane could change the ggtt offset, and then subsequent
planes would no longer notice that they are in fact using the same
ggtt offset that the first plane was already using. Thus the reuse
check will fail and we proceed to turn off these subsequent planes.
TODO: would probably make more sense to do the pure readout first
for all the planes, then check for fb reuse, and only then proceed
to pin the object into the final location in the ggtt...
v2: "fix" xe
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-15-ville.syrjala@linux.intel.com
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there.
We do this by recompiling i915/display code twice.
Now that i915 has been adapted to support the Xe build, we can add
the xe/display support.
This initial work is a collaboration of many people and unfortunately
this squashed patch won't fully honor the proper credits.
But let's try to add a few from the squashed patches:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
