Add a scope-based helpers for runtime PM that may be used to simplify
cleanup logic and potentially avoid goto-based cleanup.
For example, using
guard(xe_pm_runtime)(xe);
will get runtime PM and cause a corresponding put to occur automatically
when the current scope is exited. 'xe_pm_runtime_noresume' can be used
as a guard replacement for the corresponding 'noresume' variant.
There's also an xe_pm_runtime_ioctl conditional guard that can be used
as a replacement for xe_runtime_ioctl():
ACQUIRE(xe_pm_runtime_ioctl, pm)(xe);
if ((ret = ACQUIRE_ERR(xe_pm_runtime_ioctl, &pm)) < 0)
/* failed */
In a few rare cases (such as gt_reset_worker()) we need to ensure that
runtime PM is dropped when the function is exited by any means
(including error paths), but the function does not need to acquire
runtime PM because that has already been done earlier by a different
function. For these special cases, an 'xe_pm_runtime_release_only'
guard can be used to handle the release without doing an acquisition.
These guards will be used in future patches to eliminate some of our
goto-based cleanup.
v2:
- Specify success condition for xe_pm runtime_ioctl as _RET >= 0 so
that positive values will be properly identified as success and
trigger destructor cleanup properly.
v3:
- Add comments to the kerneldoc for the existing 'get' functions
indicating that scope-based handling should be preferred where
possible. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-31-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 59e7528dbf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
When the xe pm_notifier evicts for suspend / hibernate, there might be
racing tasks trying to re-validate again. This can lead to suspend taking
excessive time or get stuck in a live-lock. This behaviour becomes
much worse with the fix that actually makes re-validation bring back
bos to VRAM rather than letting them remain in TT.
Prevent that by having exec and the rebind worker waiting for a completion
that is set to block by the pm_notifier before suspend and is signaled
by the pm_notifier after resume / wakeup.
It's probably still possible to craft malicious applications that block
suspending. More work is pending to fix that.
v3:
- Avoid wait_for_completion() in the kernel worker since it could
potentially cause work item flushes from freezable processes to
wait forever. Instead terminate the rebind workers if needed and
re-launch at resume. (Matt Auld)
v4:
- Fix some bad naming and leftover debug printouts.
- Fix kerneldoc.
- Use drmm_mutex_init() for the xe->rebind_resume_lock (Matt Auld).
- Rework the interface of xe_vm_rebind_resume_worker (Matt Auld).
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4288
Fixes: c6a4d46ec1 ("drm/xe: evict user memory in PM notifier")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250904160715.2613-4-thomas.hellstrom@linux.intel.com
VFs without native PCIe Power Management (PM) capabilities inherit their
PF's power state as per PCIe specifications(§5.10.1 PCIe Base Spec 7.0).
Enabling Runtime Power Management (RPM) for these VFs trigger unnecessary
driver suspend/resume operations that ultimately perform no PCI-level power
transition.
Since VFs without PM capabilities cannot independently enter low-power
states, the existing RPM workflow becomes redundant:
1. Driver executes full suspend/resume sequence
2. PCI PM transition step becomes no-op
3. VF power state remains tied to PF's status
Disabling RPM for VFs eliminates this redundant processing while
maintaining proper power management through PF dependency. This
optimization ensures VFs follow their PF's power state without superfluous
runtime handling.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250812163613.9954-1-satyanarayana.k.v.p@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Userspace is still alive and kicking at this point so actually moving
pinned stuff here is tricky. However, we can instead pre-allocate the
backup storage upfront from the notifier, such that we scoop up as much
as we can, and then leave the final .suspend() to do the actual copy (or
allocate anything that we missed). That way the bulk of our allocations
will hopefully be done outside the more restrictive .suspend().
We do need to be extra careful though, since the pinned handling can now
race with PM notifier, like something becoming unpinned after we prepare
it from the notifier.
v2 (Thomas):
- Fix kernel doc and drop the pin as soon as we are done with the
restore, instead of deferring to later.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250416150913.434369-8-matthew.auld@intel.com
With the idea of having more pinned objects using the blitter engine
where possible, during suspend/resume, mark the pinned objects which
can be done during the late phase once submission/migration has been
setup. Start out simple with lrc and page-tables from userspace.
v2:
- s/early_restore/late_restore; early restore was way too bold with too
many places being impacted at once.
v3:
- Split late vs early into separate lists, to align with newly added
apply-to-pinned infra.
v4:
- Rebase.
v5:
- Make sure we restore the late phase kernel_bo_present in igpu.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250403102440.266113-13-matthew.auld@intel.com
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
Fix the false-positive "Missing outer runtime PM protection" warning
triggered by
release_async_domains() -> intel_runtime_pm_get_noresume() ->
xe_pm_runtime_get_noresume()
during system suspend.
xe_pm_runtime_get_noresume() is supposed to warn if the device is not in
the runtime resumed state, using xe_pm_runtime_get_if_in_use() for this.
However the latter function will fail if called during runtime or system
suspend/resume, regardless of whether the device is runtime resumed or
not.
Based on the above suppress the warning during system suspend/resume,
similarly to how this is done during runtime suspend/resume.
Suggested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217230547.1667561-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The current behavior for the runtime suspend case is that
xe_display_pm_suspend_late() is only called when D3cold is allowed.
Let's incorporate that behavior into a function specific to runtime PM
and call it xe_display_pm_runtime_suspend_late().
With that, we keep stuff a bit more self-contained and allow having a
place for adding more "late display runtime suspend"-related logic that
isn't dependent on the "D3cold allowed" state.
v2:
- Fix typo in that caused xe_display_pm_runtime_suspend_late() to call
itself instead of xe_display_pm_suspend_late().
- Add the empty version of xe_display_pm_runtime_suspend_late() for
the !CONFIG_DRM_XE_DISPLAY case.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129164010.29887-3-gustavo.sousa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The kernel fault injection infrastructure is used to test proper error
handling during probe. The return code of the functions using
ALLOW_ERROR_INJECTION() can be conditionnally modified at runtime by
tuning some debugfs entries. This requires CONFIG_FUNCTION_ERROR_INJECTION
(among others).
One way to use fault injection at probe time by making each of those
functions fail one at a time is:
FAILTYPE=fail_function
DEVICE="0000:00:08.0" # depends on the system
ERRNO=-12 # -ENOMEM, can depend on the function
echo N > /sys/kernel/debug/$FAILTYPE/task-filter
echo 100 > /sys/kernel/debug/$FAILTYPE/probability
echo 0 > /sys/kernel/debug/$FAILTYPE/interval
echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
modprobe xe
echo $DEVICE > /sys/bus/pci/drivers/xe/unbind
grep -oP "^.* \[xe\]" /sys/kernel/debug/$FAILTYPE/injectable | \
cut -d ' ' -f 1 | while read -r FUNCTION ; do
echo "Injecting fault in $FUNCTION"
echo "" > /sys/kernel/debug/$FAILTYPE/inject
echo $FUNCTION > /sys/kernel/debug/$FAILTYPE/inject
printf %#x $ERRNO > /sys/kernel/debug/$FAILTYPE/$FUNCTION/retval
echo $DEVICE > /sys/bus/pci/drivers/xe/bind
done
rmmod xe
It will also be integrated into IGT for systematic execution by CI.
v2: Wrappers are not needed in the cases covered by this patch, so
remove them and use ALLOW_ERROR_INJECTION() directly.
v3: Document the use of fault injection at probe time in xe_pci_probe
and refer to it where ALLOW_ERROR_INJECTION() is used.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927151207.399354-1-francois.dugast@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The 'runtime_status' field is an implementation detail of the
power management code, so a device driver should not normally
touch this:
drivers/gpu/drm/xe/xe_pm.c: In function 'xe_pm_suspending_or_resuming':
drivers/gpu/drm/xe/xe_pm.c:606:26: error: 'struct dev_pm_info' has no member named 'runtime_status'
606 | return dev->power.runtime_status == RPM_SUSPENDING ||
| ^
drivers/gpu/drm/xe/xe_pm.c:607:27: error: 'struct dev_pm_info' has no member named 'runtime_status'
607 | dev->power.runtime_status == RPM_RESUMING;
| ^
drivers/gpu/drm/xe/xe_pm.c:608:1: error: control reaches end of non-void function [-Werror=return-type]
Add an #ifdef check to avoid the build regression.
Fixes: cb85e39dc5 ("drm/xe: Suppress missing outer rpm protection warning")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909202521.1018439-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Do not raise a WARN if we are likely within suspending or resuming
path. This is likely this false positive:
rpm_status: 0000:03:00.0 status=RPM_SUSPENDING
console: xe_bo_evict_all (called from suspend)
xe_sched_job_create: dev=0000:03:00.0, ...
xe_sched_job_exec: dev=0000:03:00.0, ...
xe_pm_runtime_put: dev=0000:03:00.0, ...
xe_sched_job_run: dev=0000:03:00.0, ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
console: xe 0000:03:00.0: [drm] Missing outer runtime
PM protection
console: xe_guc_ct_send+0x15/0x50 [xe]
console: guc_exec_queue_run_job+0x1509/0x3950 [xe]
[snip]
console: drm_sched_run_job_work+0x649/0xc20
At this point, BOs are getting evicted from VRAM with rpm
usage-counter = 2, but rpm status = SUSPENDING.
The xe->pm_callback_task won't be equal 'current' because this call is
coming from a work queue.
So, pm_runtime_get_if_active() will be called and return 0 because rpm
status != ACTIVE (but equal SUSPENDING or RESUMING).
v2: Still get the reference even on non suspending/resuming
path (Jonathan, Brost).
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905140215.56404-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_bo_move() might be called in the TTM swapout path from validation
by another TTM device. If so, we are not likely to have a RPM
reference. So iff xe_pm_runtime_get() is safe to call from reclaim,
use it instead of xe_pm_runtime_get_noresume().
Strictly this is currently needed only if handle_system_ccs is true,
but use xe_pm_runtime_get() if possible anyway to increase test
coverage.
At the same time warn if handle_system_ccs is true and we can't
call xe_pm_runtime_get() from reclaim context. This will likely trip
if someone tries to enable SRIOV on LNL, without fixing Xe SRIOV
runtime resume / suspend.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903094232.166342-1-thomas.hellstrom@linux.intel.com
For non-d3cold-capable devices we'd like to be able to wake up the
device from reclaim. In particular, for Lunar Lake we'd like to be
able to blit CCS metadata to system at shrink time; at least from
kswapd where it's reasonable OK to wait for rpm resume and a
preceding rpm suspend.
Therefore use a separate lockdep map for such devices and prime it
reclaim-tainted.
v2:
- Rename lockmap acquire- and release functions. (Rodrigo Vivi).
- Reinstate the old xe_pm_runtime_lockdep_prime() function and
rename it to xe_rpm_might_enter_cb(). (Matthew Auld).
- Introduce a separate xe_pm_runtime_lockdep_prime function
called from module init for known required locking orders.
v3:
- Actually hook up the prime function at module init.
v4:
- Rebase.
v5:
- Don't use reclaim-safe RPM with sriov.
Cc: "Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Cc: "Auld, Matthew" <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826143450.92511-1-thomas.hellstrom@linux.intel.com
In XE, display runtime suspend / resume routines are called only
if d3cold is allowed. This makes the driver unable to detect any
HPDs once the device goes into runtime suspend state in platforms
like LNL. Update the display runtime suspend / resume routines
to include HPD polling regardless of d3cold status.
While xe_display_pm_suspend/resume() performs steps during runtime
suspend/resume that shouldn't happen, like suspending MST and they
are missing other steps like enabling DC9, this patchset is meant
to keep the current behavior wrt. these, leaving the corresponding
updates for a follow-up
v2: have a separate function for display runtime s/r (Rodrigo)
v3: better streamlining of system s/r and runtime s/r calls (Imre)
v4: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-4-vinod.govindapillai@intel.com
Prepare power-well and DC handling for a full power
lost during D3Cold, then sanitize it upon D3->D0.
Otherwise we get a bunch of state mismatch.
Ideally we could leave DC9 enabled and wouldn't need
to move DC9->DC0 on every runtime resume, however,
the disable_DC is part of the power-well checks and
intrinsic to the dc_off power well. In the future that
can be detangled so we can have even bigger power savings.
But for now, let's focus on getting a D3Cold, which saves
much more power by itself.
v2: create new functions to avoid full-suspend-resume path,
which would result in a deadlock between xe_gem_fault and the
modeset-ioctl.
v3: Only avoid the full modeset to avoid the race, for a more
robust suspend-resume.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
