Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
The bmi270 can be connected to I2C or a SPI interface. If it is a SPI,
during probe, if devm_regmap_init() fails, it should print the "spi"
term rather "i2c".
Fixes: 92cc50a005 ("iio: imu: bmi270: Add spi driver for bmi270 imu")
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The intention here was clearly to return -ENODEV but the return statement
was missing. It would result in an off by one read in i3c_chip_info[] on
the next line. Add the return statement.
Fixes: 1bef24e900 ("iio: imu: inv_icm45600: add I3C driver for inv_icm45600 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the iio driver for bosch imu smi330. The smi330 is a combined
three axis angular rate and three axis acceleration sensor.
Signed-off-by: Jianping Shen <Jianping.Shen@de.bosch.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The calibrated timestamp is calculated from the nominal value using the
formula:
ts_gain[ns] ≈ ts_sensitivity - (ts_trim_coeff * val) / 1000.
The values of ts_sensitivity and ts_trim_coeff are not the same for all
devices, so it is necessary to differentiate them based on the part name.
For the correct values please consult the relevant AN.
Fixes: cb3b6b8e1b ("iio: imu: st_lsm6dsx: add odr calibration feature")
Signed-off-by: Mario Tesi <mario.tesi@st.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The rate at which accelerometer or gyroscope sensor samples are fed
to the hardware FIFO (batch data rate, or BDR) does not have to
coincide with the sensor sampling frequency (output data rate, or
ODR); the only requirement is for the BDR to not be greater than
the ODR. Having a BDR lower than the ODR is useful in cases where
an application requires a high sampling rate for accurate detection
of motion events (e.g. wakeup events), but wants to read sensor
sample values from the hardware FIFO at a lower data rate (e.g. to
minimize the amount of I2C or SPI traffic and the rate of periodic
interrupts).
To support the above use case, add a sampling_frequency sysfs
attribute to the buffer directory of st_lsm6dsx IIO devices, which
controls the BDR for a given sensor independently from the "main"
sampling_frequency attribute (which controls the ODR); introduce a
new `hwfifo_odr_mHz` field in struct st_lsm6dsx_sensor to keep
track of the current BDR value, and use this field instead of the
`odr` field in the code that deals with the FIFO data rate. In the
sensor hub driver, make the hwfifo_odr_mHz value always mirror the
odr value, since there is no separate configuration setting to
control the BDR for data produced by the sensor hub functionality.
For backwards compatibility, set the buffer frequency equal to the
main frequency whenever the latter is updated via sysfs; if
userspace wants a different buffer frequency, it has to write to
the relevant sysfs attribute after any writes to the main frequency
attribute.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The `odr` field in struct st_lsm6dsx_sensor contains a data rate
value expressed in mHz, not in Hz.
Fixes: f8710f0357 ("iio: imu: st_lsm6dsx: express odr in mHZ")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add IIO device for accelerometer sensor
with data polling interface and FIFO parsing.
Attributes: raw, scale, sampling_frequency, calibbias.
Temperature is available as a processed channel.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add IIO device for gyroscope sensor
with data polling interface and FIFO parsing.
Attributes: raw, scale, sampling_frequency, calibbias.
Temperature is available as a processed channel.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add FIFO control functions.
Support hwfifo watermark by multiplexing gyro and accel settings.
Support hwfifo flush.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Core component of a new driver for InvenSense ICM-45600 devices.
It includes registers definition, main probe/setup, and device
utility functions.
ICM-456xx devices are latest generation of 6-axis IMU,
gyroscope+accelerometer and temperature sensor. This device
includes a 8K FIFO, supports I2C/I3C/SPI, and provides
intelligent motion features like pedometer, tilt detection,
and tap detection.
Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Any-motion event can be enabled on a per-axis basis and triggers a
combined event when motion is detected on any axis.
No-motion event is triggered if the rate of change on all axes falls
below a specified threshold for a configurable duration. A fake channel
is used to report this event.
Threshold and duration can be configured from userspace.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The `decimator` and `batch` fields of struct st_lsm6dsx_settings
are arrays indexed by sensor type, not by sensor hardware
identifier; moreover, the `batch` field is only used for the
accelerometer and gyroscope.
Change the array size for `decimator` from ST_LSM6DSX_MAX_ID to
ST_LSM6DSX_ID_MAX, and change the array size for `batch` from
ST_LSM6DSX_MAX_ID to 2; move the enum st_lsm6dsx_sensor_id
definition so that the ST_LSM6DSX_ID_MAX value is usable within
the struct st_lsm6dsx_settings definition.
Fixes: 801a6e0af0 ("iio: imu: st_lsm6dsx: add support to LSM6DSO")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace explicit mutex_lock() and mutex_unlock() with the guard() macro
for cleaner and safer mutex handling.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
GPD devices originally used BMI160 sensors with the "BMI0160" PNP ID.
When they switched to BMI260 sensors in newer hardware, they reused
the existing Windows driver which accepts both "BMI0160" and "BMI0260"
IDs. Consequently, they kept "BMI0160" in DSDT tables for new BMI260
devices, causing driver mismatches in Linux.
1. GPD updated BIOS v0.40+[1] for newer devices to report "BMI0260" for
BMI260 sensors to avoid loading the bmi160 driver on Linux. While this
isn't Bosch's VID;
2. Bosch's official Windows driver uses "BMI0260" as a compatible ID
3. We're seeing real devices shipping with "BMI0260" in DSDT
The DSDT excerpt of GPD G1619-04 with BIOS v0.40:
Scope (_SB.I2CC)
{
Device (BMA2)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "BMI0260") // _HID: Hardware ID
Name (_CID, "BMI0260") // _CID: Compatible ID
Name (_DDN, "Accelerometer") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x0069, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CC",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.I2CC.BMA2._CRS.RBUF */
}
# omit some noise
}
}
Link: http://download.softwincn.com/WIN%20Max%202024/Max2-7840-BIOS-V0.41.zip#1
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20250821-bmi270-gpd-acpi-v4-1-5279b471d749@uniontech.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507100510.rGt1YOOx-lkp@intel.com/
Fixes: 4aefe1c2bd ("iio: imu: add Bosch Sensortec BNO055 core driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-1-fb3fc9191251@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move all DMA aligned buffers together at the end of the structure.
1. Timestamp anynomous structure is not used with DMA so it doesn't
belong after __aligned(IIO_DMA_MINALIGN).
2. struct inv_icm42600_fifo contains it's own __aligned(IIO_DMA_MINALIGN)
within it at the end so it should not be after __aligned(IIO_DMA_MINALIGN)
in the outer struct either.
3. Normally 1 would have been considered a bug, but because of the extra
alignment from 2, it actually was OK, but we shouldn't be relying on such
quirks.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-1-5bb0c84800d9@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
