Now that legacy hardware and cache events are in json, having the
lexer match the specific event is no longer necessary and generic PMU
parsing can take place. Because of this remove the specific term
parsing, event adding, and passing of alternate_hw_config which was
now always PERF_COUNT_HW_MAX.
This mirrors a similar change for software events in commit 6e9fa4131a
("perf parse-events: Remove non-json software events").
With no hard coded legacy hardware or cache events the wild card, case
insensitivity, etc. is consistent for events. This does, however, mean
events like cycles will wild card against all PMUs. A change does the
same was originally posted and merged from:
https://lore.kernel.org/r/20240416061533.921723-10-irogers@google.com
and reverted by Linus in commit 4f1b067359 ("Revert "perf
parse-events: Prefer sysfs/JSON hardware events over legacy"") due to
his dislike for the cycles behavior on ARM. Earlier patches in this
series make perf record event opening failures non-fatal and hide the
cycles event's failure to open on ARM in perf record, so it is
expected the behavior will now be transparent in perf record. perf
stat with a cycles event will wildcard open the event on all PMUs. As
cycles is a "default event", the perf stat behavior for default events
was updated to only open them on core/software PMUs.
The change to support legacy events with PMUs was done to clean up
Intel's hybrid PMU implementation. Having sysfs/json events with
increased priority to legacy was requested by Mark Rutland
<mark.rutland@arm.com> to fix Apple-M PMU issues wrt broken legacy
events on that PMU. It was requested that RISC-V be able to add events
to the perf tool json so the PMU driver didn't need to map legacy
events to config encodings:
https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/
A previous series of patches decreasing legacy hardware event
priorities was posted in:
https://lore.kernel.org/lkml/20250416045117.876775-1-irogers@google.com/
Namhyung Kim <namhyung@kernel.org> mentioned that hardware and
software events can be implemented similarly:
https://lore.kernel.org/lkml/aIJmJns2lopxf3EK@google.com/
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now legacy hardware events are in json there's no need for a specific
printing routine that previously served for both hardware and software
events. The associated event_symbols_hw is also removed. To support
the previous filtered version use an event glob of "legacy hardware"
which matches the topic of the json events.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add the PMU terms legacy-hardware-config and
legacy-cache-config. These terms are similar to the config term in
that their values are assigned to the perf_event_attr config
value. They differ in that the PMU type is switched to be either
PERF_TYPE_HARDWARE or PERF_TYPE_HW_CACHE, and the PMU type is moved
into the extended type information of the config value. This will
allow later patches to add legacy events to json.
An example use of the terms is in the following:
```
$ perf stat -vv -e 'cpu/legacy-hardware-config=1/,cpu/legacy-cache-config=0x10001/' true
Using CPUID GenuineIntel-6-8D-1
Attempt to add: cpu/legacy-hardware-config=0x1/
..after resolving event: cpu/legacy-hardware-config=0x1/
Attempt to add: cpu/legacy-cache-config=0x10001/
..after resolving event: cpu/legacy-cache-config=0x10001/
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0x1 (PERF_COUNT_HW_INSTRUCTIONS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
------------------------------------------------------------
sys_perf_event_open: pid 994937 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 3 (PERF_TYPE_HW_CACHE)
size 136
config 0x10001 (PERF_COUNT_HW_CACHE_RESULT_MISS | PERF_COUNT_HW_CACHE_OP_READ | PERF_COUNT_HW_CACHE_L1I)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
------------------------------------------------------------
sys_perf_event_open: pid 994937 cpu -1 group_fd -1 flags 0x8 = 4
cpu/legacy-hardware-config=1/: -1: 1364046 414756 414756
cpu/legacy-cache-config=0x10001/: -1: 57453 414756 414756
cpu/legacy-hardware-config=1/: 1364046 414756 414756
cpu/legacy-cache-config=0x10001/: 57453 414756 414756
Performance counter stats for 'true':
1,364,046 cpu/legacy-hardware-config=1/
57,453 cpu/legacy-cache-config=0x10001/
0.001988593 seconds time elapsed
0.002194000 seconds user
0.000000000 seconds sys
```
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now the events file isn't directly parsed from a FILE but stored in a
string prior to parsing, remove the FILE argument to the associated
scanner functions as they only ever pass NULL.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When an event/alias is created for a PMU the terms are eagerly parsed
using parse_events_terms. For a command like perf stat or perf record,
the particular event/alias will be found, the terms parsed, the
terms cloned for use in the event parsing, and then the terms used to
configure the perf_event_attr. Events/aliases may be eagerly loaded,
such as from sysfs or in perf list, in which case the aliases terms
will be little or never used. To avoid redundant work, to avoid
cloning, and to reduce memory overhead, hold the terms for an event as
a string until they need handling as a term list. This may introduce
duplicate parsing if an event is repeated in a list, but this
situation is expected to be uncommon.
Measuring the number of instructions before and after with a sysfs
event and perf stat, there is a minor reduction in the number of
instructions executed by 0.3%.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The term list when adding an event to a PMU is expected to have the
event name for the alias lookup. Also, set found_supported so that
-EINVAL isn't returned.
Fixes: 62593394f6 ("perf parse-events: Legacy cache names on all
PMUs and lower priority")
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The function parse_events__sort_events_and_fix_groups is needed to fix
uncore events like:
```
$ perf stat -e '{data_read,data_write}' ...
```
so that the multiple uncore PMUs have a group each of data_read and
data_write events.
The same function will perform architecture sorting and group fixing,
in particular for Intel topdown/perf-metric events. Grouping multiple
perf metric events together causes perf_event_open to fail as the
group can only support one. This means command lines like:
```
$ perf stat -e 'slots,slots' ...
```
fail as the slots events are forced into a group together to try to
satisfy the perf-metric event constraints.
As the user may know better than
parse_events__sort_events_and_fix_groups add a 'X' modifier to skip
its regrouping behavior. This allows the following to succeed rather
than fail on the second slots event being opened:
```
$ perf stat -e 'slots,slots:X' -a sleep 1
Performance counter stats for 'system wide':
6,834,154,071 cpu_core/slots/ (50.13%)
5,548,629,453 cpu_core/slots/X (49.87%)
1.002634606 seconds time elapsed
```
Closes: https://lore.kernel.org/lkml/20250822082233.1850417-1-dapeng1.mi@linux.intel.com/
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reported-by: Xudong Hao <xudong.hao@intel.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the hard coded encodings from parse-events. This has the
consequence that software events are matched using the sysfs/json
priority, will be case insensitive and will be wildcarded across PMUs.
As there were software and hardware types in the parsing code, the
removal means software vs hardware logic can be removed and hardware
assumed.
Now the perf json provides detailed descriptions of software events,
remove the previous listing support that didn't contain event
descriptions. When globbing is required for the "sw" option in perf
list, use string PMU globbing as was done previously for the tool PMU.
The output of `perf list sw` command changed like this.
Before:
List of pre-defined events (to be used in -e or -M):
alignment-faults [Software event]
bpf-output [Software event]
cgroup-switches [Software event]
context-switches OR cs [Software event]
cpu-clock [Software event]
cpu-migrations OR migrations [Software event]
dummy [Software event]
emulation-faults [Software event]
major-faults [Software event]
minor-faults [Software event]
page-faults OR faults [Software event]
task-clock [Software event]
After:
List of pre-defined events (to be used in -e or -M):
software:
alignment-faults
[Number of kernel handled memory alignment faults. Unit: software]
bpf-output
[An event used by BPF programs to write to the perf ring buffer. Unit: software]
cgroup-switches
[Number of context switches to a task in a different cgroup. Unit: software]
context-switches
[Number of context switches [This event is an alias of cs]. Unit: software]
cpu-clock
[Per-CPU high-resolution timer based event. Unit: software]
cpu-migrations
[Number of times a process has migrated to a new CPU [This event is an alias of migrations]. Unit: software]
cs
[Number of context switches [This event is an alias of context-switches]. Unit: software]
dummy
[A placeholder event that doesn't count anything. Unit: software]
...
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250725185202.68671-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The -C option allows the CPUs for a list of events to be specified but
its not possible to set the CPU for a single event. Add a term to
allow this. The term isn't a general CPU list due to ',' already being
a special character in event parsing instead multiple cpu= terms may
be provided and they will be merged/unioned together.
An example of mixing different types of events counted on different CPUs:
```
$ perf stat -A -C 0,4-5,8 -e "instructions/cpu=0/,l1d-misses/cpu=4,cpu=5/,inst_retired.any/cpu=8/,cycles" -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 6,979,225 instructions/cpu=0/ # 0.89 insn per cycle
CPU4 75,138 cpu/l1d-misses/
CPU5 1,418,939 cpu/l1d-misses/
CPU8 797,553 cpu/inst_retired.any,cpu=8/
CPU0 7,845,302 cycles
CPU4 6,546,859 cycles
CPU5 185,915,438 cycles
CPU8 2,065,668 cycles
0.112449242 seconds time elapsed
```
Committer testing:
root@number:~# grep -m1 "model name" /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processor
root@number:~# perf stat -A -e "instructions/cpu=0/,instructions,l1d-misses/cpu=4,cpu=5/,cycles" -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 2,398,351 instructions/cpu=0/ # 0.44 insn per cycle
CPU0 2,398,152 instructions # 0.44 insn per cycle
CPU1 1,265,634 instructions # 0.49 insn per cycle
CPU2 606,087 instructions # 0.50 insn per cycle
CPU3 4,025,752 instructions # 0.52 insn per cycle
CPU4 4,236,810 instructions # 0.53 insn per cycle
CPU5 3,984,832 instructions # 0.66 insn per cycle
CPU6 434,132 instructions # 0.44 insn per cycle
CPU7 65,752 instructions # 0.41 insn per cycle
CPU8 459,083 instructions # 0.48 insn per cycle
CPU9 6,464,161 instructions # 1.31 insn per cycle
<SNIP>
root@number:~# perf stat -e "instructions/cpu=0/,instructions,l1d-misses/cpu=4,cpu=5/,cycles" -a sleep 0.
Performance counter stats for 'system wide':
144,822 instructions/cpu=0/ # 0.03 insn per cycle
4,666,114 instructions # 0.93 insn per cycle
2,583 l1d-misses
4,993,633 cycles
0.000868512 seconds time elapsed
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250403194337.40202-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than treat tool events as a special kind of event, create a
tool only PMU where the events/aliases match the existing
duration_time, user_time and system_time events. Remove special
parsing and printing support for the tool events, but add function
calls for when PMU functions are called on a tool_pmu.
Move the tool PMU code in evsel into tool_pmu.c to better encapsulate
the tool event behavior in that file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use a struct/bitmap rather than a copied string from lexer.
In lexer give improved error message when too many precise flags are
given or repeated modifiers.
Before:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Bad modifier
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Bad modifier
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' -a true
event syntax error: '..cycles:pp}:pp'
\___ Bad modifier
...
After:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Duplicate modifier 'k' (kernel)
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Maximum precise value is 3
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' true
event syntax error: '..cycles:pp}:pp'
\___ Maximum combined precise value is 3, adding precision to "cycles:pp"
...
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Inline parse_events_evlist_error that is only used in
parse_events_error. Modify parse_events_error to not report a parser
error unless errors haven't already been reported. Make it clearer
that the latter case only happens for unrecognized input.
Before:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
event syntax error: '..les/period=99999999999999999999/'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
After:
$ perf stat -e 'cycles/period=99999999999999999999/xyz' true
event syntax error: '..les/period=99999999999999999999/xyz'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ Unrecognized input
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prior to this patch the first and the last error encountered during
parsing are printed. To see other errors verbose needs
enabling. Unfortunately this can drop useful errors, in particular on
terms. This patch changes the errors so that instead of the first and
last all errors are recorded and printed, the underlying data
structure is changed to a list.
Before:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
Initial error:
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
After:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
event syntax error: 'slots/edge=2/'
\___ value too big for format (edge), maximum is 1
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-3-irogers@google.com
A term list is turned into a string for debug output and for the str
value in the alias.
Add a helper to do this based on existing code, but then fix for
situations like events being identified.
Use strbuf to manage the dynamic memory allocation and remove the 256
byte limit.
Use in various places the string of the term list is required.
Before:
$ sudo perf stat -vv -e inst_retired.any true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'cpu' with 'inst_retired.any,' that may result in non-fatal errors
After aliases, add event pmu 'cpu' with 'event,period,' that may result in non-fatal errors
inst_retired.any -> cpu/inst_retired.any/
...
After:
$ sudo perf stat -vv -e inst_retired.any true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempt to add: cpu/inst_retired.any/
..after resolving event: cpu/event=0xc0,period=0x1e8483/
inst_retired.any -> cpu/event=0xc0,period=0x1e8483/
...
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830070753.1821629-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features like the BPF --filter support in perf record have made the
BPF event functionality somewhat redundant. As shown by commit
fcb027c1a4f6 ("perf tools: Revert enable indices setting syntax for BPF
map") and commit 14e4b9f428 ("perf trace: Raw augmented syscalls fix
libbpf 1.0+ compatibility") the BPF event support hasn't been well
maintained and it adds considerable complexity in areas like event
parsing, not least as '/' is a separator for event modifiers as well as
in paths.
This patch removes support in the event parser for BPF events and then
the associated functions are removed. This leads to the removal of whole
source files like bpf-loader.c. Removing support means that augmented
syscalls in perf trace is broken, this will be fixed in a later commit
adding support using BPF skeletons.
The removal of BPF events causes an unused label warning from flex
generated code, so update build to ignore it:
```
util/parse-events-flex.c:2704:1: error: label ‘find_rule’ defined but not used [-Werror=unused-label]
2704 | find_rule: /* we branch to this label when backing up */
```
Committer notes:
Extracted from a larger patch that was also removing the support for
linking with libllvm and libclang, that were an alternative to using an
external clang execution to compile the .c event source code into BPF
bytecode.
Testing it:
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Bad event or PMU
Unabled to find PMU or event on a PMU of 'home'
Initial error:
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Cannot find PMU `home'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230810184853.2860737-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
