mock_get_event() uses an uninitialized local variable, nr_overflow, to
populate the overflow_err_count field. That results in incorrect
overflow_err_count values in mocked cxl_overflow trace events, such as
this case where the records are reported as 0 and should be non-zero:
[] cxl_overflow: memdev=mem7 host=cxl_mem.6 serial=7: log=Failure : 0 records from 1763228189130895685 to 1763228193130896180
Fix by using log->nr_overflow and remove the unused local variable.
A follow-up change was considered in cxl_mem_get_records_log() to
confirm that the overflow_err_count is non-zero when the overflow flag
is set [1]. Since the driver has no functional dependency on this
constraint, and a device that violates this specific requirement does
not cause incorrect driver behavior, no validation check is added.
[1] CXL 3.2, Table 8-65 Get Event Records Output Payload
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251116013036.1713313-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Commit 364ee9f326 ("cxl/test: Enhance event testing") changed the
loop iterator in mock_get_event() from a static constant,
CXL_TEST_EVENT_CNT, to a dynamic global variable, ret_limit. The
intent was to vary the number of events returned per call to simulate
events occurring while logs are being read.
However, ret_limit is modified without synchronization. When multiple
threads call mock_get_event() concurrently, one thread may read
ret_limit, another thread may increment it, and the first thread's
loop condition and size calculation see and use the updated value.
This is visible during cxl_test module load when all memdevs are
initializing simultaneously, which includes getting event records. It
is not tied to the cxl-events.sh unit test specifically, as that
operates on a single memdev.
While no actual harm results (the buffer is always large enough and
the record count fields correctly reflect what was written), this is
a correctness issue. The race creates an inconsistent state within
mock_get_event() and adding variability based on a race appears
unintended.
Make ret_limit a local variable populated from an atomic counter. Each
call gets a stable value that won't change during execution. That
preserves the intended behavior of varying the return counts across
calls while eliminating the race condition.
This implementation uses "+ 1" to produce the full range of 1 to
CXL_TEST_EVENT_RET_MAX (4) records. Previously only 1, 2, 3 were
produced.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251116013819.1713780-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Extended linear cache unit testing support
- Standardize CXL auto region size
- Add cxl_test CFMWS support for extended linear cache
- Add support for acpi extended linear cache
Add a module parameter to allow activation of extended linear cache
on the auto region for cxl_test. The current platform implementation
for extended linear cache is 1:1 of DRAM and CXL memory. A CFMWS is
created with the size of both memory together where DRAM takes the
first part of the memory range and CXL covers the second part. The
current CXL auto region on cxl_test consists of 2 256M devices that
creates a 512M region. The new extended linear cache setup will have
512M DRAM and 512M CXL memory for a total of 1G CFMWS. The hardware
decoders must have their starting offset moved to after the DRAM region
to handle the CXL regions.
[ dj: Fixup commenting style. (Jonathan) ]
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Link: https://patch.msgid.link/20251117144611.903692-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add a loadable test module that validates CXL address translation
calculations using parameterized test vectors. The module tests both
host-to-device and device-to-host address translations for Modulo and
XOR interleave arithmetic.
Two types of testing are provided:
1. Parameterized test vectors:
Test vectors are passed as module parameters in the format:
"dpa pos r_eiw r_eig hb_ways math expected_spa".
Round-trip validation is performed:
- Translate a DPA and position to a SPA
- Verify the result matches expected SPA
- Translate that SPA back to a DPA and position
- Verify round-trip consistency
2. Internal validation testing:
When no test vectors are provided, the module performs validation
of the translation functions by checking parameter boundaries and
running 10,000 iterations of randomly generated valid parameters
to exercise the core calculation functions.
The module uses the CXL Driver translation functions through symbols
exported exclusively for cxl_translate.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
devm_cxl_port_enumerate_dports() is not longer used after below commit
commit 4f06d81e7c ("cxl: Defer dport allocation for switch ports")
Delete it and the relevant interface implemented in cxl_test.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add changes to delay the allocation and setup of dports until when the
endpoint device is being probed. At this point, the CXL link is
established from endpoint to host bridge. Addresses issues seen on
some platforms when dports are probed earlier.
Link: https://lore.kernel.org/linux-cxl/20250829180928.842707-1-dave.jiang@intel.com/
cxl_test uses mock functions for decoder enumaration. Add initialization
of the cxld->target_map[] for cxl_test based decoders in the mock
functions.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
With devm_cxl_switch_port_decoders_setup() being called within cxl_core
instead of by the port driver probe, adjustments are needed to deal with
circular symbol dependency when this function is being mock'd. Add the
appropriate changes to get around the circular dependency.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
devm_cxl_add_dport_by_dev() outside of cxl_test is done through PCI
hierarchy. However with cxl_test, it needs to be done through the
platform device hierarchy. Add the mock function for
devm_cxl_add_dport_by_dev().
When cxl_core calls a cxl_core exported function and that function is
mocked by cxl_test, the call chain causes a circular dependency issue. Dan
provided a workaround to avoid this issue. Apply the method to changes from
the late dport allocation changes in order to enable cxl-test.
In cxl_core they are defined with "__" added in front of the function. A
macro is used to define the original function names for when non-test
version of the kernel is built. A bit of macros and typedefs are used to
allow mocking of those functions in cxl_test.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Group the decoder setup code in switch and endpoint port probe into a
single function for each to reduce the number of functions to be mocked
in cxl_test. Introduce devm_cxl_switch_port_decoders_setup() and
devm_cxl_endpoint_decoders_setup(). These two functions will be mocked
instead with some functions optimized out since the mock version does
not do anything. Remove devm_cxl_setup_hdm(),
devm_cxl_add_passthrough_decoder(), and devm_cxl_enumerate_decoders() in
cxl_test mock code. In turn, mock_cxl_add_passthrough_decoder() can be
removed since cxl_test does not setup passthrough decoders.
__wrap_cxl_hdm_decode_init() and __wrap_cxl_dvsec_rr_decode() can be
removed as well since they only return 0 when called.
[dj: drop 'struct cxl_port' forward declaration (Robert)]
Suggested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add a cached copy of the hardware port-id list that is available at init
before all @dport objects have been instantiated. Change is in preparation
of delayed dport instantiation.
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Pull CXL updates from Dave Jiang:
"The most significant changes in this pull request is the series that
introduces ACQUIRE() and ACQUIRE_ERR() macros to replace conditional
locking and ease the pain points of scoped_cond_guard().
The series also includes follow on changes that refactor the CXL
sub-system to utilize the new macros.
Detail summary:
- Add documentation template for CXL conventions to document CXL
platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform
enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address
availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and
improve readability
- Add return for the dummy version of cxl_decoder_detach() without
CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix"
* tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (28 commits)
Documentation/ABI/testing/debugfs-cxl: Add 'cxl' to clear_poison path
cxl/region: Fix an ERR_PTR() vs NULL bug
cxl/events: Trace Memory Sparing Event Record
cxl/events: Add extra validity checks for CVME count in DRAM Event Record
cxl/events: Add extra validity checks for corrected memory error count in General Media Event Record
cxl/events: Update Common Event Record to CXL spec rev 3.2
cxl: Fix -Werror=return-type in cxl_decoder_detach()
cleanup: Fix documentation build error for ACQUIRE updates
cxl: Convert to ACQUIRE() for conditional rwsem locking
cxl/region: Consolidate cxl_decoder_kill_region() and cxl_region_detach()
cxl/region: Move ready-to-probe state check to a helper
cxl/region: Split commit_store() into __commit() and queue_reset() helpers
cxl/decoder: Drop pointless locking
cxl/decoder: Move decoder register programming to a helper
cxl/mbox: Convert poison list mutex to ACQUIRE()
cleanup: Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
cxl: Remove core/acpi.c and cxl core dependency on ACPI
cxl/core: Using cxl_resource_contains_addr() to check address availability
cxl/edac: Fix wrong dpa checking for PPR operation
cxl/core: Introduce a new helper cxl_resource_contains_addr()
...
Testing revealed the following error message for a CXL memdev that has
Feature support:
[ 56.690430] cxl mem0: Resources present before probing
Attach the allocation of cxl_fwctl to the parent device of cxl_memdev.
devm_add_* calls for cxl_memdev should not happen before the memdev
probe function or outside the scope of the memdev driver.
cxl_test missed this bug because cxl_test always arranges for the
cxl_mem driver to be loaded before cxl_mock_mem runs. So the driver core
always finds the devres list idle in that case.
[DJ: Updated subject title and added commit log suggestion from djbw]
Fixes: 858ce2f56b ("cxl: Add FWCTL support to CXL")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/linux-cxl/6801aea053466_71fe2944c@dwillia2-xfh.jf.intel.com.notmuch/
Link: https://patch.msgid.link/20250418002933.406439-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
Add emulation to support Set Feature mailbox command to cxl_test.
The only feature supported is the device patrol scrub feature. The
set feature allows activation of patrol scrub for the cxl_test
emulated device. The command does not support partial data transfer
even though the spec allows it. This restriction is to reduce complexity
of the emulation given the patrol scrub feature is very minimal.
Link: https://patch.msgid.link/r/20250307205648.1021626-8-dave.jiang@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add fwctl support code to allow sending of CXL feature commands from
userspace through as ioctls via FWCTL. Provide initial setup bits. The
CXL PCI probe function will call devm_cxl_setup_fwctl() after the
cxl_memdev has been enumerated in order to setup FWCTL char device under
the cxl_memdev like the existing memdev char device for issuing CXL raw
mailbox commands from userspace via ioctls.
Link: https://patch.msgid.link/r/20250307205648.1021626-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add CXL Features support. Setup code for enabling in kernel usage of CXL
Features. Expecting EDAC/RAS to utilize CXL Features in kernel for
things such as memory sparing. Also prepartion for enabling of CXL FWCTL
support to issue allowed Features from user space.
In a nvdimm interleave-set each device with an invalid or zero
serial number may cause pmem region initialization to fail, but in
cxl case such device could still set cookies of nd_interleave_set
and create a nvdimm pmem region.
This adds the validation of serial number in cxl pmem region creation.
The event of no serial number would cause to fail to set the cookie
and pmem region.
For cxl-test to work properly, always +1 on mock device's serial
number.
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250219040029.515451-2-wangyuquan1236@phytium.com.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CXL spec r3.2 8.2.9.6.1 Get Supported Features (Opcode 0500h)
The command retrieve the list of supported device-specific features
(identified by UUID) and general information about each Feature.
The driver will retrieve the Feature entries in order to make checks and
provide information for the Get Feature and Set Feature command. One of
the main piece of information retrieved are the effects a Set Feature
command would have for a particular feature. The retrieved Feature
entries are stored in the cxl_mailbox context.
The setup of Features is initiated via devm_cxl_setup_features() during the
pci probe function before the cxl_memdev is enumerated.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250220194438.2281088-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The pending efforts to add CXL Accelerator (type-2) device [1], and
Dynamic Capacity (DCD) support [2], tripped on the
no-longer-fit-for-purpose design in the CXL subsystem for tracking
device-physical-address (DPA) metadata. Trip hazards include:
- CXL Memory Devices need to consider a PMEM partition, but Accelerator
devices with CXL.mem likely do not in the common case.
- CXL Memory Devices enumerate DPA through Memory Device mailbox
commands like Partition Info, Accelerators devices do not.
- CXL Memory Devices that support DCD support more than 2 partitions.
Some of the driver algorithms are awkward to expand to > 2 partition
cases.
- DPA performance data is a general capability that can be shared with
accelerators, so tracking it in 'struct cxl_memdev_state' is no longer
suitable.
- Hardcoded assumptions around the PMEM partition always being index-1
if RAM is zero-sized or PMEM is zero sized.
- 'enum cxl_decoder_mode' is sometimes a partition id and sometimes a
memory property, it should be phased in favor of a partition id and
the memory property comes from the partition info.
Towards cleaning up those issues and allowing a smoother landing for the
aforementioned pending efforts, introduce a 'struct cxl_dpa_partition'
array to 'struct cxl_dev_state', and 'struct cxl_range_info' as a shared
way for Memory Devices and Accelerators to initialize the DPA information
in 'struct cxl_dev_state'.
For now, split a new cxl_dpa_setup() from cxl_mem_create_range_info() to
get the new data structure initialized, and cleanup some qos_class init.
Follow on patches will go further to use the new data structure to
cleanup algorithms that are better suited to loop over all possible
partitions.
cxl_dpa_setup() follows the locking expectations of mutating the device
DPA map, and is suitable for Accelerator drivers to use. Accelerators
likely only have one hardcoded 'ram' partition to convey to the
cxl_core.
Link: http://lore.kernel.org/20241230214445.27602-1-alejandro.lucero-palau@amd.com [1]
Link: http://lore.kernel.org/20241210-dcd-type2-upstream-v8-0-812852504400@intel.com [2]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305827.668823.13978794102080021276.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In preparation for consolidating all DPA partition information into an
array of DPA metadata, introduce helpers that hide the layout of the
current data. I.e. make the eventual replacement of ->ram_res,
->pmem_res, ->ram_perf, and ->pmem_perf with a new DPA metadata array a
no-op for code paths that consume that information, and reduce the noise
of follow-on patches.
The end goal is to consolidate all DPA information in 'struct
cxl_dev_state', but for now the helpers just make it appear that all DPA
metadata is relative to @cxlds.
As the conversion to generic partition metadata walking is completed,
these helpers will naturally be eliminated, or reduced in scope.
Cc: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305238.668823.16553986866633608541.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Pull Compute Express Link (CXL) updates from Dave Jiang:
"A tweak to the HMAT output that was acked by Rafael, a prep patch for
CXL type2 devices support that's coming soon, refactoring of the CXL
regblock enumeration code, and a series of patches to update the event
records to CXL spec r3.1:
- Move HMAT printouts to pr_debug()
- Add CXL type2 support to cxl_dvsec_rr_decode() in preparation for
type2 support
- A series that updates CXL event records to spec r3.1 and related
changes
- Refactoring of cxl_find_regblock_instance() to count regblocks"
* tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs: Refactor out functions to count regblocks of given type
cxl/test: Update test code for event records to CXL spec rev 3.1
cxl/events: Update Memory Module Event Record to CXL spec rev 3.1
cxl/events: Update DRAM Event Record to CXL spec rev 3.1
cxl/events: Update General Media Event Record to CXL spec rev 3.1
cxl/events: Add Component Identifier formatting for CXL spec rev 3.1
cxl/events: Update Common Event Record to CXL spec rev 3.1
cxl/pci: Add CXL Type 1/2 support to cxl_dvsec_rr_decode()
ACPI/HMAT: Move HMAT messages to pr_debug()
Constify the following API:
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
To :
struct device *device_find_child(struct device *dev, const void *data,
device_match_t match);
typedef int (*device_match_t)(struct device *dev, const void *data);
with the following reasons:
- Protect caller's match data @*data which is for comparison and lookup
and the API does not actually need to modify @*data.
- Make the API's parameters (@match)() and @data have the same type as
all of other device finding APIs (bus|class|driver)_find_device().
- All kinds of existing device match functions can be directly taken
as the API's argument, they were exported by driver core.
Constify the API and adapt for various existing usages.
BTW, various subsystem changes are squashed into this commit to meet
'git bisect' requirement, and this commit has the minimal and simplest
changes to complement squashing shortcoming, and that may bring extra
code improvement.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for drivers/pwm
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-4-6623037414d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cxl_dvsec_rr_decode() the pci driver expects to retrieve a cxlds,
struct cxl_dev_state, from the driver_data field of struct device.
While that works for Type 3, drivers for Type 1/2 devices may not
put a cxlds in the driver_data field.
In preparation for supporting Type 1/2 devices, replace parameter
'struct device' with 'struct cxl_dev_state' in cxl_dvsec_rr_decode().
Remove the unused parameter 'cxl_port' in cxl_dvsec_rr_decode().
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20241203162112.5088-1-alucerop@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
commit ce17ad0d54 ("cxl: Wait Memory_Info_Valid before access memory
related info") added another implementation, which is
cxl_dvsec_mem_range_valid(), of waiting for memory_info_valid without
realizing it duplicated wait_for_valid(). Remove wait_for_valid() and
retain cxl_dvsec_mem_range_valid() as the former is hardcoded to check
only the Memory_Info_Valid bit of DVSEC range 1, while the latter allows
for selection between DVSEC range 1 or 2 via parameter.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-3-yanfei.xu@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The name of cxl_setup_parent_dport() function is not clear, the function
is used to initialize AER and RAS capabilities on a dport, therefore,
rename the function to cxl_dport_init_ras_reporting(), it is easier for
user to understand what the function does. Besides, adjust the order of
the function parameters, the subject of cxl_dport_init_ras_reporting()
is a cxl dport, so a struct cxl_dport as the first parameter of the
function should be better.
cxl_dport_map_regs() is used to map CXL RAS capability on a cxl dport,
using cxl_dport_map_ras() as the function name.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-1-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The cxl_test unit test environment on qemu always hits below call trace
with KASAN enabled:
BUG: KASAN: slab-out-of-bounds in cxl_setup_parent_dport+0x480/0x530 [cxl_core]
Read of size 1 at addr ff110000676014f8 by task (udev-worker)/676[ 24.424403] CPU: 2 PID: 676 Comm: (udev-worker) Tainted: G O N 6.10.0-qemucxl #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20240214-2.el9 02/14/2024
Call Trace:
<TASK>
dump_stack_lvl+0xea/0x150
print_report+0xce/0x610
? kasan_complete_mode_report_info+0x40/0x200
kasan_report+0xcc/0x110
__asan_report_load1_noabort+0x18/0x20
cxl_setup_parent_dport+0x480/0x530 [cxl_core]
cxl_mem_probe+0x49b/0xaa0 [cxl_mem]
cxl_test module models a CXL topology for testing, it creates some
emulated dports with platform devices in the CXL topology, so the
dport_dev of an emulated dport points to a platform device rather than a
pci device or a pci host bridge in the case. Currently,
cxl_setup_parent_dport() is used to set up RAS and AER capability on the
dport connected to the CXL memory device, but cxl_test does not support
RAS or AER functionality yet, so the fix is implementing a
__wrap_cxl_setup_parent_dport() to filter out all emulated dports,
guarantees only real dports can be handled by cxl_setup_parent_dport().
Fixes: f05fd10d13 ("cxl/pci: Add RCH downstream port AER register discovery")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Closes: https://lore.kernel.org/linux-cxl/ZrHTBp2O+HtUe6kt@xpf.sh.intel.com/T/#t
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240809082750.3015641-3-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
