Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
test_tc_edt currently defines the target rate in both the userspace and
BPF parts. This value could be defined once in the userspace part if we
make it able to configure the BPF program before starting the test.
Add a target_rate variable in the BPF part, and make the userspace part
set it to the desired rate before attaching the shaping program.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-4-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_tc_edt.sh uses a pair of veth and a BPF program attached to the TX
veth to shape the traffic to 5MBps. It then checks that the amount of
received bytes (at interface level), compared to the TX duration, indeed
matches 5Mbps.
Convert this test script to the test_progs framework:
- keep the double veth setup, isolated in two veths
- run a small tcp server, and connect client to server
- push a pre-configured amount of bytes, and measure how much time has
been needed to push those
- ensure that this rate is in a 2% error margin around the target rate
This two percent value, while being tight, is hopefully large enough to
not make the test too flaky in CI, while also turning it into a small
example of BPF-based shaping.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-2-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_tc_edt BPF program uses a custom section name, which works fine
when manually loading it with tc, but prevents it from being loaded with
libbpf.
Update the program section name to "tc" to be able to manipulate it with
a libbpf-based C test.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-1-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sk->sk_timer has been used for TCP keepalives.
Keepalive timers are not in fast path, we want to use sk->sk_timer
storage for retransmit timers, for better cache locality.
Create icsk->icsk_keepalive_timer and change keepalive
code to no longer use sk->sk_timer.
Added space is reclaimed in the following patch.
This includes changes to MPTCP, which was also using sk_timer.
Alias icsk->mptcp_tout_timer and icsk->icsk_keepalive_timer
for inet_sk_diag_fill() sake.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bench test "trig-kernel-count" can be used as a baseline comparison
for fentry and other benchmarks, and the calling to bpf_get_numa_node_id()
should be considered as composition of the baseline. So, let's call it in
trigger_count(). Meanwhile, rename trigger_count() to
trigger_kernel_count() to make it easier understand.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251116014242.151110-1-dongml2@chinatelecom.cn
Since commit 31158ad02d ("rqspinlock: Add deadlock detection
and recovery") the updated path on re-entrancy now reports deadlock
via -EDEADLK instead of the previous -EBUSY.
Also, the way reentrancy was exercised (via fentry/lookup_elem_raw)
has been fragile because lookup_elem_raw may be inlined
(find_kernel_btf_id() will return -ESRCH).
To fix this fentry is attached to bpf_obj_free_fields() instead of
lookup_elem_raw() and:
- The htab map is made to use a BTF-described struct val with a
struct bpf_timer so that check_and_free_fields() reliably calls
bpf_obj_free_fields() on element replacement.
- The selftest is updated to do two updates to the same key (insert +
replace) in prog_test.
- The selftest is updated to align with expected errno with the
kernel’s current behavior.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/r/20251117060752.129648-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Three tests are added:
- invalidate_pkt_pointers_by_tail_call checks that one can use the
packet pointer after a tail call. This was originally possible
and also poses not problems, but was made impossible by 1a4607ffba.
- invalidate_pkt_pointers_by_static_tail_call tests a corner case
found by Eduard Zingerman during the discussion of the original fix,
which was broken in that fix.
- subprog_result_tail_call tests that precision propagation works
correctly across tail calls. This did not work before.
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251119160355.1160932-3-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346 ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The connect4_prog and bpf_iter_setsockopt tests duplicate the same
open-coded TCP congestion control string comparison logic. Since
bpf_strncmp() provides the same functionality, use it instead to
avoid repeated open-coded loops.
This change applies only to functional BPF tests and does not affect
the verifier performance benchmarks (veristat.cfg). No functional
changes intended.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251115225550.1086693-5-hoyeon.lee@suse.com
Some BPF selftests contain identical copies of the min(), max(),
before(), and after() helpers. These repeated snippets are the same
across the tests and do not need to be defined separately.
Move these helpers into bpf_tracing_net.h so they can be shared by
TCP related BPF programs. This removes repeated code and keeps the
helpers in a single place.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251115225550.1086693-4-hoyeon.lee@suse.com
Add a test to check that bpf_skb_check_mtu(BPF_MTU_CHK_SEGS) is
rejected (-EINVAL) if skb->transport_header is not set. The test
needs to lower the MTU of the loopback device. Thus, take this
opportunity to run the test in a netns by adding "ns_" to the test
name. The "serial_" prefix can then be removed.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251112232331.1566074-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_task_work_schedule_resume() and bpf_task_work_schedule_signal() have
been renamed in bpf tree to bpf_task_work_schedule_resume_impl() and
bpf_task_work_schedule_signal_impl() accordingly.
There are few uses of these kfuncs in selftests that are not in bpf
tree, so that when we port [1] into bpf-next, those BPF programs will
not compile.
This patch aligns those remaining callsites with the kfunc renaming.
It should go on top of [1] when applying on bpf-next.
1: https://lore.kernel.org/all/20251104-implv2-v3-0-4772b9ae0e06@meta.com/
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251105132105.597344-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Increase arena test coverage.
Convert glob_match() to bpf arena in two steps:
1.
Copy paste lib/glob.c into bpf_arena_strsearch.h
Copy paste lib/globtests.c into progs/arena_strsearch.c
2.
Add __arena to pointers
Add __arg_arena to global functions that accept arena pointers
Add cond_break to loops
The test also serves as a good example of what's possible
with bpf arena and how existing algorithms can be converted.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251111032931.21430-1-alexei.starovoitov@gmail.com
A test case for a situation when widen_imprecise_scalars() is called
with old->allocated_stack > cur->allocated_stack. Test structure:
def widening_stack_size_bug():
r1 = 0
for r6 in 0..1:
iterator_with_diff_stack_depth(r1)
r1 = 42
def iterator_with_diff_stack_depth(r1):
if r1 != 42:
use 128 bytes of stack
iterator based loop
iterator_with_diff_stack_depth() is verified with r1 == 0 first and
r1 == 42 next. Causing stack usage of 128 bytes on a first visit and 8
bytes on a second. Such arrangement triggered a KASAN error in
widen_imprecise_scalars().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test to verify that updating [lru_,]percpu_hash maps decrements
refcount when BPF_KPTR_REF objects are involved.
The tests perform the following steps:
. Call update_elem() to insert an initial value.
. Use bpf_refcount_acquire() to increment the refcount.
. Store the node pointer in the map value.
. Add the node to a linked list.
. Probe-read the refcount and verify it is *2*.
. Call update_elem() again to trigger refcount decrement.
. Probe-read the refcount and verify it is *1*.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251105151407.12723-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This tests introduces a tiny smc_hs_ctrl for filtering SMC connections
based on IP pairs, and also adds a realistic topology model to verify it.
Also, we can only use SMC loopback under CI test, so an additional
configuration needs to be enabled.
Follow the steps below to run this test.
make -C tools/testing/selftests/bpf
cd tools/testing/selftests/bpf
sudo ./test_progs -t smc
Results shows:
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Tested-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20251107035632.115950-4-alibuda@linux.alibaba.com
Add a test to verify that skb metadata remains accessible after calling
bpf_skb_adjust_room(), which modifies the packet headroom and can trigger
head reallocation.
The helper expects an Ethernet frame carrying an IP packet so switch test
packet identification by source MAC address since we can no longer rely on
Ethernet proto being set to zero.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-14-5ceb08a9b37b@cloudflare.com
Since pskb_expand_head() no longer clears metadata on unclone, update tests
for cloned packets to expect metadata to remain intact.
Also simplify the clone_dynptr_kept_on_{data,meta}_slice_write tests.
Creating an r/w dynptr slice is sufficient to trigger an unclone in the
prologue, so remove the extraneous writes to the data/meta slice.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-12-5ceb08a9b37b@cloudflare.com
Move metadata verification into the BPF TC programs. Previously,
userspace read metadata from a map and verified it once at test end.
Now TC programs compare metadata directly using __builtin_memcmp() and
set a test_pass flag. This enables verification at multiple points during
test execution rather than a single final check.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-10-5ceb08a9b37b@cloudflare.com
Adding test that attaches kprobe/kretprobe multi and verifies the
ORC stacktrace matches expected functions.
Adding bpf_testmod_stacktrace_test function to bpf_testmod kernel
module which is called through several functions so we get reliable
call path for stacktrace.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Rename bpf_stream_vprintk() to bpf_stream_vprintk_impl().
This makes bpf_stream_vprintk() follow the already established "_impl"
suffix-based naming convention for kfuncs with the bpf_prog_aux
argument provided by the verifier implicitly. This convention will be
taken advantage of with the upcoming KF_IMPLICIT_ARGS feature to
preserve backwards compatibility to BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-2-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Rename:
bpf_task_work_schedule_resume()->bpf_task_work_schedule_resume_impl()
bpf_task_work_schedule_signal()->bpf_task_work_schedule_signal_impl()
This aligns task work scheduling kfuncs with the established naming
scheme for kfuncs with the bpf_prog_aux argument provided by the
verifier implicitly. This convention will be taken advantage of with the
upcoming KF_IMPLICIT_ARGS feature to preserve backwards compatibility to
BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-1-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Both livepatch and BPF trampoline use ftrace. Special attention is needed
when livepatch and fexit program touch the same function at the same
time, because livepatch updates a kernel function and the BPF trampoline
need to call into the right version of the kernel function.
Use samples/livepatch/livepatch-sample.ko for the test.
The test covers two cases:
1) When a fentry program is loaded first. This exercises the
modify_ftrace_direct code path.
2) When a fentry program is loaded first. This exercises the
register_ftrace_direct code path.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-4-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
file_reader/on_open_expect_fault intermittently fails when test_progs
runs tests in parallel, because it expects a page fault on first read.
Another file_reader test running concurrently may have already pulled
the same pages into the page cache, eliminating the fault and causing a
spurious failure.
Make file_reader/on_open_expect_fault read from a file region that does
not overlap with other file_reader tests, so the initial access still
faults even under parallel execution.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251029195907.858217-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_tc_tunnel.sh script checks that a large variety of tunneling
mechanisms handled by the kernel can be handled as well by eBPF
programs. While this test shares similarities with test_tunnel.c (which
is already integrated in test_progs), those are testing slightly
different things:
- test_tunnel.c creates a tunnel interface, and then get and set tunnel
keys in packet metadata, from BPF programs.
- test_tc_tunnels.sh manually parses/crafts packets content
Bring the tests covered by test_tc_tunnel.sh into the test_progs
framework, by creating a dedicated test_tc_tunnel.sh. This new test
defines a "generic" runner which, for each test configuration:
- will configure the relevant veth pair, each of those isolated in a
dedicated namespace
- will check that traffic will fail if there is only an encapsulating
program attached to one veth egress
- will check that traffic succeed if we enable some decapsulation module
on kernel side
- will check that traffic still succeeds if we replace the kernel
decapsulation with some eBPF ingress decapsulation.
Example of the new test execution:
# ./test_progs -a tc_tunnel
#447/1 tc_tunnel/ipip_none:OK
#447/2 tc_tunnel/ipip6_none:OK
#447/3 tc_tunnel/ip6tnl_none:OK
#447/4 tc_tunnel/sit_none:OK
#447/5 tc_tunnel/vxlan_eth:OK
#447/6 tc_tunnel/ip6vxlan_eth:OK
#447/7 tc_tunnel/gre_none:OK
#447/8 tc_tunnel/gre_eth:OK
#447/9 tc_tunnel/gre_mpls:OK
#447/10 tc_tunnel/ip6gre_none:OK
#447/11 tc_tunnel/ip6gre_eth:OK
#447/12 tc_tunnel/ip6gre_mpls:OK
#447/13 tc_tunnel/udp_none:OK
#447/14 tc_tunnel/udp_eth:OK
#447/15 tc_tunnel/udp_mpls:OK
#447/16 tc_tunnel/ip6udp_none:OK
#447/17 tc_tunnel/ip6udp_eth:OK
#447/18 tc_tunnel/ip6udp_mpls:OK
#447 tc_tunnel:OK
Summary: 1/18 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251027-tc_tunnel-v3-3-505c12019f9d@bootlin.com
When trying to run bpf-based encapsulation in a s390x environment, some
parts of test_tc_tunnel.bpf.o do not encapsulate correctly the traffic,
leading to tests failures. Adding some logs shows for example that
packets about to be sent on an interface with the ip6vxlan_eth program
attached do not have the expected value 5 in the ip header ihl field,
and so are ignored by the program.
This phenomenon appears when trying to cross-compile the selftests,
rather than compiling it from a virtualized host: the selftests build
system may then wrongly pick some host headers. If <asm/byteorder.h>
ends up being picked on the host (and if the host has a endianness
different from the target one), it will then expose wrong endianness
defines (e.g __LITTLE_ENDIAN_BITFIELD instead of __BIT_ENDIAN_BITFIELD),
and it will for example mess up the iphdr structure layout used in the
ebpf program.
To prevent this, directly use the vmlinux.h header generated by the
selftests build system rather than including directly specific kernel
headers. As a consequence, add some missing definitions that are not
exposed by vmlinux.h, and adapt the bitfield manipulations to allow
building and using the program on both types of platforms.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251027-tc_tunnel-v3-2-505c12019f9d@bootlin.com
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient
for file-backed use cases; even 32 bits can be limiting. Refactor dynptr
helpers/kfuncs to use 64-bit size and offset, ensuring consistency
across the APIs.
This change does not affect internals of xdp, skb or other dynptrs,
which continue to behave as before. Also it does not break binary
compatibility.
The widening enables large-file access support via dynptr, implemented
in the next patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
