This introduces a test for IPSec offload over bonding, utilizing netdevsim
for the testing process, as veth interfaces do not support IPSec offload.
The test will ensure that the IPSec offload functionality remains operational
even after a failover event occurs in the bonding configuration.
Here is the test result:
TEST: bond_ipsec_offload (active_slave eth0) [ OK ]
TEST: bond_ipsec_offload (active_slave eth1) [ OK ]
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250925023304.472186-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add simple tests to validate that the driver sets up timestamping
configuration according to what is reported in capabilities.
For RX timestamping we allow driver to fallback to wider scope for
timestamping if filter is applied. That actually means that driver
can enable ptpv2-event when it reports ptpv2-l4-event is supported,
but not vice versa.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250923173310.139623-5-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are currently no kernel tests that verify setting and getting
options of the team driver.
In the future, options may be added that implicitly change other
options, which will make it useful to have tests like these that show
nothing breaks. There will be a follow up patch to this that adds new
"rx_enabled" and "tx_enabled" options, which will implicitly affect the
"enabled" option value and vice versa.
The tests use teamnl to first set options to specific values and then
gets them to compare to the set values.
Signed-off-by: Marc Harvey <marcharvey@google.com>
Link: https://patch.msgid.link/20250905040441.2679296-1-marcharvey@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add comprehensive selftest to verify:
- Per-port actor priority setting via ad_actor_port_prio
- Aggregator selection behavior with port_priority ad_select policy
Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for
broader reusability across network selftests.
Here is the result output
# ./bond_lacp_prio.sh
TEST: bond 802.3ad (ad_actor_port_prio setting) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio select) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio switch) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
devmem test fails on NIPA. Most likely we get skb(s) with readable
frags (why?) but the failure manifests as an OOM. The OOM happens
because ncdevmem spams the following message:
recvmsg ret=-1
recvmsg: Bad address
As of today, ncdevmem can't deal with various reasons of EFAULT:
- falling back to regular recvmsg for non-devmem skbs
- increasing ctrl_data size (can't happen with ncdevmem's large buffer)
Exit (cleanly) with error when recvmsg returns EFAULT. This should at
least cause the test to cleanup its state.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250904182710.1586473-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rss_ctx test has gotten pretty flaky after I increased
the queue count in NIPA 2->3. Not 100% clear why. We get
a lot of failures in the rss_ctx.test_hitless_key_update case.
Looking closer it appears that the failures are mostly due
to startup costs. I measured the following timing for ethtool -X:
- python cmd(shell=True) : 150-250msec
- python cmd(shell=False) : 50- 70msec
- timed in bash : 45- 55msec
- YNL Netlink call : 2- 4msec
- .set_rxfh callback : 1- 2msec
The target in the test was set to 200msec. We were mostly measuring
ethtool startup cost it seems. Switch to YNL since it's 100x faster.
Lower the pass criteria to 150msec, no real science behind this number
but we removed some overhead, drivers which previously passed 200msec
should easily pass 150msec now.
Separately we should probably follow up on defaulting to shell=False,
when script doesn't explicitly ask for True, because the overhead
is rather significant.
Switch from _rss_key_rand() to random.randbytes(), YNL takes a binary
array rather than array of ints.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901173139.881070-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0d6ccfe6b3 ("selftests: drv-net: rss_ctx: check for all-zero keys")
added a skip exception if NIC has fewer than 3 queues enabled,
but it's just constructing the object, it's not actually rising
this exception.
Before:
# Exception| net.lib.py.utils.CmdExitFailure: Command failed: ethtool -X enp1s0 equal 3 hkey d1:cc:77:47:9d:ea:15:f2:b9:6c:ef:68:62:c0:45:d5:b0:99:7d:cf:29:53:40:06:3d:8e:b9:bc:d4:70:89:b8:8d:59:04:ea:a9:c2:21:b3:55:b8:ab:6b:d9:48:b4:bd:4c:ff:a5:f0:a8:c2
not ok 1 rss_ctx.test_rss_key_indir
After:
ok 1 rss_ctx.test_rss_key_indir # SKIP Device has fewer than 3 queues (or doesn't support queue stats)
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827173558.3259072-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kernel tries to be helpful and attach the XDP program in generic
mode if the driver has no BPF ndo at all. Since the xdp.py tests
all have "native" in their names this can be quite confusing.
Force native / "drv" attachment. Note that netdevsim re-uses
the generic handler as its "native" handler, so we'll maintain
the test coverage of the generic mode that way. No need to test
both explicitly, I reckon.
Link: https://patch.msgid.link/20250822195645.1673390-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest to verify bonding behavior when `lacp_active` is set to `off`.
The test checks the following:
- The passive LACP bond should not send LACPDUs before receiving a partner's
LACPDU.
- The transmitted LACPDUs must not include the active flag.
- After transitioning to EXPIRED and DEFAULTED states, the passive side should
still not initiate LACPDUs.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ncdevmem tests that the kernel correctly rejects attempts
to deactivate queues with MPs bound.
Make the configure_channels() test support combined channels.
Currently it tries to set the queue counts to rx N tx N-1,
which only makes sense for devices which have IRQs per ring
type. Most modern devices used combined IRQs/channels with
both Rx and Tx queues. Since the math is total Rx == combined+Rx
setting Rx when combined is non-zero will be increasing the total
queue count, not decreasing as the test intends.
Note that the test would previously also try to set the Tx
ring count to Rx - 1, for some reason. Which would be 0
if the device has only 2 queues configured.
With this change (device with 2 queues):
setting channel count rx:1 tx:1
YNL set channels: Kernel error: 'requested channel counts are too low for existing memory provider setting (2)'
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250815231513.381652-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We see quite a few flakes during the TSO test against virtualized
devices in NIPA. There's often 10-30 retransmissions during the
test. Sometimes as many as 100. Set the retransmission threshold
at 1/4th of the wire frame target.
Link: https://patch.msgid.link/20250815224100.363438-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On fast machines the tests run in quick succession so even
when tests clean up after themselves the carrier may need
some time to come back.
Specifically in NIPA when ping.py runs right after netpoll_basic.py
the first ping command fails.
Since the context manager callbacks are now common NetDrvEpEnv
gets an ip link up call as well.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250812142054.750282-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc2).
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
d7a276a576 ("net: stmmac: rk: convert to suspend()/resume() methods")
de1e963ad0 ("net: stmmac: rk: put the PHY clock on remove")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a simple test for checking that RSS on flow label works,
and that its rejected for IPv4 flows.
# ./tools/testing/selftests/drivers/net/hw/rss_flow_label.py
TAP version 13
1..2
ok 1 rss_flow_label.test_rss_flow_label
ok 2 rss_flow_label.test_rss_flow_label_6only
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250811234212.580748-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Device Under Test should always be the local system.
While the Rx test gets this right the Tx test is sending
from remote to local. So Tx of DMABUF memory happens on remote.
These tests never run in NIPA since we don't have a compatible
device so we haven't caught this.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The general expectations for network HW selftests is that they
will be run as root. sudo doesn't seem to work on NIPA VMs.
While it's probably something solvable in the setup I think we should
remove the sudos. devmem is the only networking test using sudo.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test is implicitly assuming the device only has 2 queues.
A real device will likely have more. The exact problem is that
because NAPIs get added to the list from the head, the netlink
dump reports them in reverse order. So the naive napis[0] will
actually likely give us the _last_ NAPI, not the first one.
Re-enable all the NAPIs instead of hard-coding 2 in the test.
This way the NAPIs we operated on will always reappear,
doesn't matter where they were in the registration order.
Fixes: e6d7626881 ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 2677010e77 ("Add support to set NAPI threaded for individual
NAPI") added support to enable/disable threaded napi using netlink. This
also extended the napi config save/restore functionality to set the napi
threaded state. This breaks netdev reset for drivers that use napi
threaded at device level and also use napi config save/restore on
napi_disable/napi_enable. Basically on netdev with napi threaded enabled
at device level, a napi_enable call will get stuck trying to stop the
napi kthread. This is because the napi->config->threaded is set to
disabled when threaded is enabled at device level.
The issue can be reproduced on virtio-net device using qemu. To
reproduce the issue run following,
echo 1 > /sys/class/net/threaded
ethtool -L eth0 combined 1
Update the threaded state in napi config in netif_set_threaded and add a
new test that verifies this scenario.
Tested on qemu with virtio-net:
NETIF=eth0 ./tools/testing/selftests/drivers/net/napi_threaded.py
TAP version 13
1..2
ok 1 napi_threaded.change_num_queues
ok 2 napi_threaded.enable_dev_threaded_disable_napi_threaded
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 2677010e77 ("Add support to set NAPI threaded for individual NAPI")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250804164457.2494390-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A lot of test cases in the file are related to the idle and unbalanced
timers of resilient nexthop groups and these tests are reported to be
flaky on slow machines running debug kernels.
Rather than marking a lot of individual tests with xfail_on_slow(),
simply mark all the tests. Note that the test is stable on non-debug
machines and that with debug kernels we are mainly interested in the
output of various sanitizers in order to determine pass / fail.
Before:
# make -C tools/testing/selftests KSFT_MACHINE_SLOW=yes \
TARGETS=drivers/net/netdevsim TEST_PROGS=nexthop.sh \
TEST_GEN_PROGS="" run_tests
[...]
# TEST: Bucket migration after idle timer (with delete) [FAIL]
# Group expected to still be unbalanced
[...]
not ok 1 selftests: drivers/net/netdevsim: nexthop.sh # exit=1
After:
# make -C tools/testing/selftests KSFT_MACHINE_SLOW=yes \
TARGETS=drivers/net/netdevsim TEST_PROGS=nexthop.sh \
TEST_GEN_PROGS="" run_tests
[...]
# TEST: Bucket migration after idle timer (with delete) [XFAIL]
# Group expected to still be unbalanced
[...]
ok 1 selftests: drivers/net/netdevsim: nexthop.sh
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20250729160609.02e0f157@kernel.org/
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250804114320.193203-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge in late fixes to prepare for the 6.17 net-next PR.
Conflicts:
net/core/neighbour.c
1bbb76a899 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().")
13a936bb99 ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.")
03dc03fa04 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries")
Adjacent changes:
drivers/net/usb/usbnet.c
0d9cfc9b8c ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
2c04d279e8 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism")
net/ipv6/route.c
31d7d67ba1 ("ipv6: annotate data-races around rt->fib6_nsiblings")
1caf272972 ("ipv6: adopt dst_dev() helper")
3b3ccf9ed0 ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, UDP exchange is prone to failure when cmd attempt to send data
while socat in bkg is not ready. Since, the behavior is probabilistic, this
can result in flakiness for XDP tests. While testing
test_xdp_native_tx_mb() on netdevsim, a failure rate of around 1% in 500
500 iterations was observed.
Use wait_port_listen() to ensure that the bkg socat is started and ready to
receive before cmd start sending. With proposed changes, a re-run of the
same test passed 100% of time.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250724235140.2645885-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the `check_for_dependencies()` function in `lib_netcons.sh` to check
whether IPv6 is enabled by verifying the existence of
`/proc/net/if_inet6`. Having IPv6 is a now a dependency of netconsole
tests. If the file does not exist, the script will skip the test with an
appropriate message suggesting to verify if `CONFIG_IPV6` is enabled.
This prevents the test to misbehave if IPv6 is not configured.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723-netcons_test_ipv6-v1-1-41c9092f93f9@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The non-tunneled tso6 test case was showing up as:
ok 8 tso.ipv4
This is because of the way test_builder() uses the inner_ipver arg in
test naming, and how test_info is iterated over in main(). Given that
some tunnels not supported yet, e.g. ipip or sit, only support ipv4 or
ipv6 as the inner network protocol, I think the best fix here is to
call test_builder() in separate branches for tunneled and non-tunneled
tests, and to make supported inner l3 types an explicit attribute of
tunnel test cases.
# Detected qstat for LSO wire-packets
TAP version 13
1..14
ok 1 tso.ipv4
# Testing with mangleid enabled
ok 2 tso.vxlan4_ipv4
ok 3 tso.vxlan4_ipv6
# Testing with mangleid enabled
ok 4 tso.vxlan_csum4_ipv4
ok 5 tso.vxlan_csum4_ipv6
# Testing with mangleid enabled
ok 6 tso.gre4_ipv4
ok 7 tso.gre4_ipv6
ok 8 tso.ipv6
# Testing with mangleid enabled
ok 9 tso.vxlan6_ipv4
ok 10 tso.vxlan6_ipv6
# Testing with mangleid enabled
ok 11 tso.vxlan_csum6_ipv4
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre6_ipv4
ok 14 tso.gre6_ipv6
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250723184740.4075410-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
