Add the TPS23881B I2C power sourcing equipment controller to the list of
supported devices.
Falling back to the TPS23881 predecessor device is not suitable as firmware
loading needs to handled differently by the driver. The TPS23881 and
TPS23881B devices require different firmware. Trying to load the TPS23881
firmware on a TPS23881B device fails and must therefore be omitted.
Signed-off-by: Thomas Wismer <thomas.wismer@scs.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251029212312.108749-3-thomas@wismer.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an interrupt property to the device tree bindings for the TI TPS23881
PSE controller. The interrupt is primarily used to detect classification
and disconnection events, which are essential for managing the PSE
controller in compliance with the PoE standard.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-13-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints, and fix the fallout of wrong manager node regex and
missing properties.
Fixes: 9c1de033af ("dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171732.2836880-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PSE PI setup may encompass multiple PSE controllers or auxiliary circuits
that collectively manage power delivery to one Ethernet port.
Such configurations might support a range of PoE standards and require
the capability to dynamically configure power delivery based on the
operational mode (e.g., PoE2 versus PoE4) or specific requirements of
connected devices. In these instances, a dedicated PSE PI node becomes
essential for accurately documenting the system architecture. This node
would serve to detail the interactions between different PSE controllers,
the support for various PoE modes, and any additional logic required to
coordinate power delivery across the network infrastructure.
The old usage of "#pse-cells" is unsuficient as it carries only the PSE PI
index information.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-8-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the pattern matching for PSE-PD controller nodes to allow -N
suffixes. This enables the use of multiple "ethernet-pse" nodes without the
need for a "reg" property.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add bindings for the regulator based Ethernet PoDL PSE controller and
generic bindings for all PSE controllers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
