Summary:
* Add support for disconnected eDP streams
* Add log for MALL entry on DCN32x
* Add DCC/Tiling reset helper for DCN and DCE
* Guard against setting dispclk low when active
* Other minor fixes
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
eDP may not be connected to the GPU on driver start causing
fail enumeration.
[How]
Move the virtual signal type check before the eDP connector
signal check.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In current HPO DP2 implementation, driver would enable/disable DIG
encoder when configuring HPO DP2. Therefore, usb4 dp tunnelling should
not use the DIG encoder if the corresponded phy is used by a HPO DP2
stream.
[HOW]
A DP2 stream is treated as a dig stream.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should never apply a minimum dispclk value while in prepare_bandwidth
or while displays are active. This is always an optimization for when
all displays are disabled.
[How]
Defer dispclk optimization until safe_to_lower = true and display_count
reaches 0.
Since 0 has a special value in this logic (ie. no dispclk required)
we also need adjust the logic that clamps it for the actual request
to PMFW.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Reviewed-by: Leo Chen <leo.chen@amd.com>
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The informative structure needs to be extended by the total number of DPPs
required per each active plane.
The new informative field is going to be used as a statistical indicator.
[How]
The dml2_core_calcs_get_informative() routine must count a total number of DPPs.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The latest DP spec requires the DP TX to read DPCD F0000h through F0009h
when detecting LTTPR capabilities for the first time.
[How]
Update LTTPR cap retrieval to read up to F0009h (two more bytes than the
previous F0007h), and store the LTTPR ALPM capabilities.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename dc_plane_force_update_for_panic to
dc_plane_force_dcc_and_tiling_disable to describe the function operation
in the name. Also, this function might be used in other contexts, and a
more generic name can be helpful for this purpose.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces a function helper for resetting DCN/DCE DCC and
tiling. Those functions are generic for their respective DCN/DCE, so
they were added to the oldest version of each architecture.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
By default, DCN HW is in idle optimized state which does not allow access
to PHY registers. If BIOS powers up the DCN, it is fine because they will
power up everything. Only exit idle optimized state when not taking control
from VBIOS.
Fixes: be704e5ef4 ("Revert "drm/amd/display: Exit idle optimizations before attempt to access PHY"")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
currently dml2 is using a hard coded 16 to convert memclk to dram_speed_mts.
for apu, this depends on wck_ratio.
change to pass the already calculated dram_speed_mts from fpu to dml2.
v2: use existing calculation of dram_speed_mts for now to avoid regression
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There have been instances of some monitors being unable to link train on
their reported link speed using their selected FFE preset. If a different
FFE preset is found that has a higher rate of success during link training
this workaround can be used to force its FFE preset.
[How]
A new link workaround flag is made called force_dp_ffe_preset. The flag is
checked in override_training_settings and will set lt_settings->ffe_preset
which is null if the flag is not set. The flag is then set in
override_lane_settings.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Brendan Tam <Brendan.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
causing some regression on dgpu which still needs the
pre-emptive return, limit this to reporter asic version
it is simple to include
different dcn versions from this point forward, each dcn
resource is initialized with the flag and can be enabled
at will
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting link DPMS off in response to HPD disconnect creates AUX
transactions on a link that is supposed to be disconnected. This can
cause issues in some cases when the sink re-asserts HPD and expects
source to re-enable the link.
[How]
Avoid AUX transactions on disconnected link.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use DC_LOG_DEBUG instead of pr_info to match other uses in dc.c.
Fixes: 091e301c2b ("drm/amd/display: Add debug messages for dc_validate_boot_timing()")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_enc_cfg_get_link_enc_used_by_stream() is no longer used after
2021's:
commit 6366b00346 ("drm/amd/display: Maintain consistent mode of
operation during encoder assignment")
which introduces and uses the _current version instead.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_max_support_fbc_buffersize() is unused since 2021's
commit 94f0d0c80c ("drm/amd/display/dc/dce110/dce110_compressor: Remove
unused function 'dce110_get_required_compressed_surfacesize")
removed it's only caller.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hubbub1_toggle_watermark_change_req() last use was removed in 2017 by
commit b8fce2c9d7 ("drm/amd/display: Optimize programming front end")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_clock_requirements_for_state() was added in 2018 by
commit 8ab2180f96 ("drm/amd/display: Add function to fetch clock
requirements")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last user of dc_stream_get_crtc_position() was
mod_freesync_get_v_position() which is removed in a previous
patch in this series.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mpc1_is_mpcc_idle() was added in 2017 by
commit feb4a3cd8e ("drm/amd/display: Integrating MPC pseudocode")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Move SPL to a new path
- Request HW cursor on DCN3.2 with SubVP
- Allow reuse of of DCN4x code
- Enable odm 4:1 when debug key is set
- Fix seamless boot sequence
- Support multiple options during psr entry.
- Revert "Exit idle optimizations before attempt to access PHY"
- Fix out-of-bound accesses
- Fixes for mcache programming in DML21
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When SubVP is active the HW cursor size is limited to 64x64, and
anything larger will force composition which is bad for gaming on
DCN3.2 if the game uses a larger cursor.
[HOW]
If HW cursor is requested, typically by a fullscreen game, do not
enable SubVP so that up to 256x256 cursor sizes are available for
DCN3.2.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
