The CMTG is a timing generator that runs in parallel with transcoders
timing generators and can be used as a reference for synchronization.
We have observed that we are inheriting from GOP a display configuration
with the CMTG enabled. Because our driver doesn't currently implement
any CMTG sequences, the CMTG ends up still enabled after our driver
takes over.
We need to make sure that the CMTG is not enabled if we are not going to
use it. For that, let's add a partial implementation in our driver that
only cares about disabling the CMTG if it was found enabled during
initial hardware readout. In the future, we can also implement sequences
for using the CMTG if that becomes a needed feature.
For now, we only deal with cases when it is possible to disable the CMTG
without requiring a modeset. For earlier display versions, we simply
skip if we find the CMTG enabled and we can't disable it without a
proper modeset. In the future, we need to properly handle that case.
v2:
- DG2 does not have the CMTG. Update HAS_CMTG() accordingly.
- Update logic to force disabling of CMTG only for initial commit.
v3:
- Add missing changes for v2 that were staged but not committed.
v4:
- Avoid if/else duplication in intel_cmtg_dump_state() by using "n/a"
for CMTG B enabled/disabled string for platforms without it. (Jani)
- Prefer intel_cmtg_readout_hw_state() over intel_cmtg_readout_state().
(Jani)
- Use display struct instead of i915 as first parameter for
TRANS_DDI_FUNC_CTL2(). (Jani)
- Fewer continuation lines in variable declaration/initialization for
better readability. (Jani)
- Coding style improvements. (Jani)
- Use drm_dbg_kms() instead of drm_info() for logging the disabling
of the CMTG.
- Make struct intel_cmtg_state entirely private to intel_cmtg.c.
v5:
- Do the disable sequence as part of the sanitization step after
hardware readout instead of initial modeset commit. (Jani)
- Adapt to commit 1513358246 ("drm/i915/display: convert global state
to struct intel_display") by using a display struct instead of i915
as argument for intel_atomic_global_obj_init().
v6:
- Do not track CMTG state as a global state. (Ville)
- Simplify the driver logic by only disabling the CMTG only on cases
when a modeset is not required. (Ville)
v7:
- Remove the call to drm_WARN_ON() when checking
intel_cmtg_disable_requires_modeset() and use a FIXME in the comment
instead.
- Remove the !HAS_CMTG() guard from intel_cmtg_get_config(), which is
static and its caller is already protected by that same condition.
- Also take the opportunity to put some Bspec references in the commit
trailers section.
v8:
- Use HAS_TRANSCODER() instead of intel_crtc_for_pipe(). (Ville)
- Ensure transcoder power well is enabled before reading
TRANS_DDI_FUNC_CTL2. (Ville)
Bspec: 68915, 49262
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124173956.46534-1-gustavo.sousa@intel.com
In the C20 algorithm for HDMI TMDS, certain fields have been updated
in the BSpec to set values for SRAM_GENERIC_<A/B>_TX_CNTX_CFG_1,
such as tx_misc and dac_ctrl_range for Xe2LPD, Xe2HPD and MTL/ARL.
This patch covers fields that need to be set based on the platform type.
Some ARLs SoCs cannot be directly distinguished by their GMD version Id,
Specifically to set value of tx_misc, so PCI Host Bridge IDs are used
for differentiation.
v2:
- Relocate defines and Restructure the code(Jani)
v3:
- Replace conditions with display.platform.<platform> (jani)
- Move host bridge check to new function (Jani)
v4:
- Identify/Replace arrowlake_u as meteorlake_u(Jani)
Bspec:74165,74491
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217201301.3593054-3-dnyaneshwar.bhadane@intel.com
From LNL onwards there is a new hardware feature, which
allows to detect if the driver wrongly allocated DBuf
entries and they happen to overlap. If enabled this will
cause a specific interrupt to occur.
We now handle it in the driver, by writing correspondent
error message to kernel log.
v2: Initialize dbuf overlap flag in runtime_defaults (Jani Nikula)
v3: Unmask the overlap detection interrupt (Uma)
v4: use display over i915 (Jani Nikula)
v5: Use display instead of dev_priv (Jani Nikula)
v6: rebased to resolve merge conflicts
Bspec: 69450, 69464
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030103319.207235-1-vinod.govindapillai@intel.com
Use x100, or ver * 100 + rel, versions for full IP version checks,
similar to what xe driver does:
- Replace IP_VER(14, 1) inline with 1401, etc.
- Convert DISPLAY_VER_FULL() to DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100()
- Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP()
This makes ver.rel versions easier to use, follows the xe driver
pattern, and drops the dependency on the IP_VER() macro.
v2: Rebase, drop IP_VER() from xe compat headers
v3: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
The .is_lp member of struct intel_device_info and its wrapper IS_LP()
are used to identify just four platforms, VLV/CHV/BXT/GLK. It didn't
become as important as it was perhaps originally planned. Just remove
it, and replace with exact platform identification. In a few places this
becomes slightly verbose, but in many places it improves clarity to
immediately see the exact platforms.
Additionally, this lets us remove the xe compat macro.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930124056.3541988-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Both i915 and xe have code to identify display steppings. Start
deduplicating this by, uh, adding a third copy in display code. This is
not yet used for anything other than debug logging. We'll switch over
later.
For platforms before GMD ID, attach the mapping from PCI revision to
stepping in the platform and subplatform descriptors. This is a
considerably cleaner approach than having it completely separate.
Also add a separate field for stepping in display runtime info,
preserving the value from GMD ID.
v2: Handle NULL subdesc (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821095036.2044654-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Compute Fixed Average Vtotal/CMRR with resepect to
userspace VRR enablement. Also calculate required
parameters in case of CMRR is enabled. During
intel_vrr_compute_config, CMRR is getting enabled
based on userspace has enabled Variable refresh mode
with VRR timing generator or not. Make CMRR as small subset of
FAVT mode, when Panel is running on Fixed refresh rate
and on VRR framework then only enable CMRR to match with
actual refresh rate.
--v2:
- Update is_cmrr_frac_required function return as bool, not int. [Jani]
- Use signed int math instead of unsigned in cmrr_get_vtotal2. [Jani]
- Fix typo and usage of camel case in cmrr_get_vtotal. [Jani]
- Use do_div in cmrr_get_vtotalwhile calculating cmrr_m. [ Jani]
- Simplify cmrr and vrr compute config in intel_vrr_compute_config. [Jani]
- Correct valiable name usage in is_cmrr_frac_required. [Ville]
--v3:
- Removing RFC tag.
--v4:
- Added edp check to address edp usecase for now. (ville)
- Updated is_cmrr_fraction_required to more simplified calculation.
- on longterm goal to be worked upon uapi as suggestion from ville.
--v5:
- Correct vtotal paramas accuracy and add 2 digit precision.
- Avoid using DIV_ROUND_UP and improve scanline precision.
--v6:
- Make CMRR a small subset of FAVT mode.
--v7:
- Update commit message to avoid confusion with Legacy VRR (Ankit).
- Add cmrr.enable in last, so remove from this patch.
--v8:
- Set cmrr.enable in current patch instead of separate patch (Ankit).
- Since vrr.enable and cmrr.enable are not mutually exclusive,
handle accordingly (Ankit).
- is_edp is not required inside is_cmrr_frac_required function (Ankit).
- Add video_mode_required flag for future enhancement.
- Correct cmrr_m/cmrr_n calculation.
--v9:
- Move patch to last and set other bits before computing
cmrr.enable.(Ankit)
- Add TODO: for to address target refresh rate precision as future
enhancement.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610072203.24956-10-mitulkumar.ajitkumar.golani@intel.com
Add the necessary structures and functions to handle reading and
unpacking Adaptive Sync Secondary Data Packets. Also add support
to write and pack AS SDP.
--v2:
- Correct use of REG_BIT and REG_GENMASK. [Jani]
- Use as_sdp instead of async. [Jani]
- Remove unrelated comments and changes. [Jani]
- Correct code indent. [Jani]
--v3:
- Update definition names for AS SDP which are starting from
HSW, as these defines are applicable for ADLP+.(Ankit)
--v4:
- Remove as_sdp_mode from crtc_state.
- Drop metadata keyword.
- For consistency, update ADL_ prefix or post fix as required.
--v5:
- Check if AS_SDP bit is set in crtc_state->infoframes.enable. If not
return.
- Check for HAS_AS_SDP() before setting VIDEO_DIP_ENABLE_AS_ADL mask.
--v6:
- Rename intel_read_dp_infoframe_as_sdp to intel_read_dp_as_sdp.
--v7:
- Add read back for length and vtotal correction.
--v8:
- Use as_sdp->target_rr & 0xFF.
- Shift by 8 instead of 32, and drop casting to u64.
- Remove changes which are does not belong to this patch.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-5-mitulkumar.ajitkumar.golani@intel.com
Use the >= and < operators for the DISPLAY_VER checks everywhere.
This is what most of the code does, but especially recently random
pieces of code have started doing this differently for no good reason.
Conversion done with the following cocci:
@find@
expression i915;
constant ver;
@@
(
DISPLAY_VER(i915) <= ver
|
DISPLAY_VER(i915) > ver
)
@script:python inc@
old_ver << find.ver;
new_ver;
@@
coccinelle.new_ver = str(int(old_ver) + 1)
@@
expression find.i915;
constant find.ver;
identifier inc.new_ver;
@@
(
- DISPLAY_VER(i915) <= ver
+ DISPLAY_VER(i915) < new_ver
|
- DISPLAY_VER(i915) > ver
+ DISPLAY_VER(i915) >= new_ver
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently all module parameters are handled by i915_param.c/h. This
is a problem for display parameters when Xe driver is used. Add
a mechanism to add parameters specific to the display. This is mainly
copied from i915_[debugfs]_params.[ch]. Parameters are not yet moved. This
is done by subsequent patches.
v2:
- Drop unused predefinition (dentry)
- Clarify need for empty INTEL_DISPLAY_PARAMS_FOR_EACH in comment
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-2-jouni.hogander@intel.com
