drm/i915 feature pull for v6.15:
Features and functionality:
- Enable DP 128b/132b SST DSC (Jani, Imre)
- Allow DSB to perform commits when VRR is enabled (Ville)
- Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit)
- Allow DSB usage when PSR is enabled on LNL+ (Jouni)
- Enable Panel Replay mode change without full modeset (Jouni)
- Enable async flips with compressed buffers on ICL+ (Ville)
- Support luminance based brightness control via DPCD for eDP (Suraj)
- Enable VRR enable/disable without full modeset (Mitul, Ankit)
- Add debugfs facility for force testing HDCP 1.4 (Suraj)
- Add scaler tracepoints, improve plane tracepoints (Ville)
- Improve DMC wakelock debugging facilities (Gustavo)
- Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo)
- Provide more information on display faults (Ville)
Refactoring and cleanups:
- Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre)
- Joiner and Y plane reorganization (Ville)
- Move HDCP debugfs to intel_hdcp.c (Jani)
- Clean up and unify LSPCON interfaces (Jani)
- Move code out of intel_display.c to reduce its size (Ville)
- Clean up and simplify DDI port enabling/disabling (Imre)
- Make LPT LP a dedicated PCH type, refactor (Jani)
- Simplify DSC range BPG offset calculation (Ankit)
- Scaler cleanups (Ville)
- Remove unused code from GVT (David Alan Gilbert)
- Improve plane debugging (Ville)
- DSB and VRR refactoring (Ville)
Fixes:
- Check if vblank is sufficient for DSC prefill and scaler (Mitul)
- Fix Mesa clear color alignment regression (Ville)
- Add missing TC DP PHY lane stagger delay (Imre)
- Fix DSB + VRR usage for PTL+ (Ville)
- Improve robustness of display VT-d workarounds (Ville)
- Fix platforms for dbuf tracker state service programming (Ravi)
- Fix DMC wakelock support conditions (Gustavo)
- Amend DMC wakelock register ranges (Gustavo)
- Disable the Common Primary Timing Generator (CMTG) (Gustavo)
- Enable C20 PHY SSC (Suraj)
- Add workaround for DKL PHY DP mode write (Nemesa)
- Fix build warnings on clamp() usage (Guenter Roeck, Ankit)
- Fix error handling while adding a connector (Imre)
- Avoid full modeset at probe on vblank delay mismatches (Ville)
- Fix encoder HDMI check for HDCP line rekeying (Suraj)
- Fix HDCP repeater authentication during topology change (Suraj)
- Handle display PHY power state reset for power savings (Mika)
- Fix typos all over the place (Nitin)
- Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar)
- Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre)
- Do not hardcode LSPCON settle timeout (Giedrius Statkevičius)
Xe driver changes:
- Re-use display vmas when possible (Maarten)
- Remove double pageflip (Maarten)
- Enable DP tunneling (Imre)
- Separate i915 and xe tracepoints (Ville)
DRM core changes:
- Increase DPCD eDP display control CAP size to 5 bytes (Suraj)
- Add DPCD eDP version 1.5 definition (Suraj)
- Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius)
Merges:
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com
intel_dp_mtp_tu_compute_config() conversion to use .4 fixed point didn't
take into account that intel_dp_mst_max_dpt_bpp() may return INT_MAX
when the transport limitation is not relevant. Converting INT_MAX to .4
fixed point results in -1.0, which then gets used as if it were a real
max BPP value:
i915 0000:00:02.0: [drm:intel_dp_mtp_tu_compute_config [i915]] Limiting bpp to max DPT bpp (24.0000 -> -1.0000)
i915 0000:00:02.0: [drm:intel_dp_mtp_tu_compute_config [i915]] Looking for slots in range min bpp 18.0000 max bpp -1.0000
Just return 0 for "no max DPT BPP", and handle it explicitly.
Fixes: 67782bf6e8 ("drm/i915/mst: Convert intel_dp_mtp_tu_compute_config() to .4 format")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13624
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204153717.2996923-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Mandate a minimum Hblank symbol cycle count between BlankingStart and
BlankingEnd in 8b/10b MST and 128b/132b mode.
v2: Affine calculation/updation of min HBlank to dp_mst (Jani)
v3: moved min_hblank from struct intel_dp to intel_crtc_state (Jani)
v4: use max/min functions, change intel_xx *intel_xx to intel_xx *xx
(Jani)
Limit hblank to 511 and accommodate BS/BE in calculated value
(Srikanth)
v5: Some spelling corrections (Suraj)
v6: Removed DP2.1 in comment as this is applicable for both DP2.1 and
DP1.4 (Suraj)
v7: crtc_state holds the logical values and the register value
computation is moved to mst_enable() (Jani)
v8: Limit max hblank to 0x10, disable min_hblank on mst_disable (Jani)
Bspec: 74379
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122-hblank-v9-1-90afda006685@intel.com
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.
There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.
Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.
v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
Currently, when bandwidth is insufficient for a given mode, we attempt
to use DSC. This is indicated by a debug print, followed by a check for
DSC support.
The debug message states that we are trying DSC, but DSC might not be
supported, which can give an incorrect picture in the logs if we bail
out later.
Correct the order for both DP and DP MST to:
- Check if DSC is required and supported, and return early if DSC is
not supported.
- Print a debug message to indicate that DSC will be tried next.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103031424.1732774-1-ankit.k.nautiyal@intel.com
Forward Error Correction is required for DP if we are using DSC but
is optional for eDP.
Currently the helper intel_dp_supports_dsc checks if fec_enable is set for
DP or not. The helper is called after fec_enable is set in crtc_state.
Instead of this a better approach would be to:
first, call intel_dp_supports_dsc to check for DSC support
(along with FEC requirement for DP) and then set fec_enable for DP
(if not already set) in crtc_state.
To achieve this, remove the check for fec_enable in the helper and instead
check for FEC support for DP. With this change the helper
intel_dp_supports_dsc can be called earlier and return early if DSC is
not supported. The structure intel_dp is added to the helper to get the
FEC support for DP.
v2: Pass intel_dp to adjust_limits_for_dsc_hblank_expansion_quirk
instead of deriving it from connector. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-2-ankit.k.nautiyal@intel.com
After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.
v2:
- Rebase on the change which moves adding the connector to the
connector list only later when calling
drm_connector_dynamic_register().
v3:
- Rebase on drm-misc-next, due to a trivial conflict with
commit 5503f8112e ("drm/i915/mst: unify MST topology callback naming ..."),
which is only in drm-intel-next.
- Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
typo in the commit log.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-6-imre.deak@intel.com
