Currently we do not differentiate between the various users of the
qcom,mdss-dsi-ctrl. The driver is flexible enough to operate from one
compatible string but, the hardware does have some significant differences
in the number of clocks.
To facilitate documenting the clocks add the following compatible strings
- qcom,apq8064-dsi-ctrl
- qcom,msm8916-dsi-ctrl
- qcom,msm8953-dsi-ctrl
- qcom,msm8974-dsi-ctrl
- qcom,msm8996-dsi-ctrl
- qcom,msm8998-dsi-ctrl
- qcom,sc7180-dsi-ctrl
- qcom,sc7280-dsi-ctrl
- qcom,sdm660-dsi-ctrl
- qcom,sdm845-dsi-ctrl
- qcom,sm8150-dsi-ctrl
- qcom,sm8250-dsi-ctrl
- qcom,sm8350-dsi-ctrl
- qcom,sm8450-dsi-ctrl
- qcom,sm8550-dsi-ctrl
- qcom,qcm2290-dsi-ctrl
Deprecate qcom,dsi-ctrl-6g-qcm2290 in favour of the desired format while we
do so.
Several MDSS yaml files exist which document the dsi sub-node.
For each existing SoC MDSS yaml, provide the right dsi compat string.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519078/
Link: https://lore.kernel.org/r/20230118171621.102694-2-bryan.odonoghue@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Same to i.MX8mp LDB, i.MX93 LDB is controlled by mediamix blk-ctrl
through 'ldb' register and 'lvds' register. Also, the 'ldb' clock
is required. i.MX93 LDB supports only one LVDS channel(channel 0,
a.k.a, LVDS Channel-A in the device tree binding documentation), while
i.MX8mp LDB supports at most two. Add i.MX93 LDB device tree binding
in the existing i.MX8mp LDB device tree binding documentation.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123021449.969243-2-victor.liu@nxp.com
Merge display-related changes targeting Qualcomm DRM MSM driver.
Notable changes:
DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform
Core:
- Added bindings for SM8150 (driver support already present)
DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume
DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
support for HBR3 rates.
DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs
MDP5:
- Schema conversion to YAML
Misc fixes as usual
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU, DSI, MDSS:
- Support for SM8350, SM8450 SM8550 and SC8280XP platform
Core:
- Added bindings for SM8150 (driver support already present)
DPU:
- Partial support for DSC on SM8150 and SM8250
- Fixed color transformation matrix being lost on suspend/resume
DP:
- Support for DP on SDM845 and SC8280XP platforms
- HPD fixes
- Support for limiting DP link rate via DT property, this enables
support for HBR3 rates.
DSI:
- Validate display modes according to the DSI OPP table
- DSI PHY support for the SM6375 platform
- Fixed byte intf clock selection for 14nm PHYs
MDP5:
- Schema conversion to YAML
Misc fixes as usual
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
When converting from .txt to .yaml we didn't include descriptions for the
existing regulator supplies.
- vdd
- vdda
- vddio
Add those descriptions into the yaml now as they were prior to the
conversion. In the .txt description we marked these regulators as required,
however, that requirement appears to have been in error.
Taking the example of sc7180-trogdor-wormdingler.dtsi. The avdd and avee
come from GPIO controlled external regulators, not the SoC and in this case
there's no need for vddio to power an I/O bus. Similarly the regulators for
the LCD are controlled by the panel driver not by the dsi-ctrl driver.
It would be possible to connect a different type of panel to the DSI bus
here in which case we may or may not want to make use of vdd, vdda or
vddio.
This is also the case for older chipsets like apq8064, msm8916 etc the vdd*
regulators in the dsi-ctrl block are helpers not dependencies.
Add the description of vdd, vdda and vddio back in for the existing
upstream dts where vdd, vdda or vddio are already declared but, don't
declare those regulators required - they are not SoC requirements.
Fixes: 4dbe55c977 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/518643/
Link: https://lore.kernel.org/r/20230116225217.1056258-4-bryan.odonoghue@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
msm-fixes for v6.3-rc4
Display Fixes:
- Fix the documentation for dpu_encoder_phys_wb_init() and
dpu_encoder_phys_wb_setup_fb() APIs to address doc warnings
- Remove vcca-supply and vdds-supply as mandatory for 14nm PHY and
10nm PHY DT schemas respectively as they are not present on some
SOCs using these PHYs
- Add the dsi-phy-regulator-ldo-mode to dsi-phy-28nm.yaml as it was
missed out during txt to yaml migration
- Remove operating-points-v2 and power-domain as a required property
for the DSI controller as thats not the case for every SOC
- Fix the description from display escape clock to display core
clock in the dsi controller yaml
- Fix the memory leak for mdp1-mem path for the cases when we return
early after failing to get mdp0-mem ICC paths for msm
- Fix error handling path in msm_hdmi_dev_probe() to release the phy
ref count when devm_pm_runtime_enable() fails
- Fix the dp_aux_isr() routine to make sure it doesnt incorrectly
signal the aux transaction as complete if the ISR was not an AUX
isr. This fixes a big hitter stability bug on chromebooks.
- Add protection against null pointer dereference when there is no
kms object as in the case of headless adreno GPU in the shutdown
path.
GPU Fixes:
- a5xx: fix quirks to actually be a bitmask and not overwrite each
other
- a6xx: fix gx halt sequence to avoid 1000ms hang on some devices
- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv7=in_MHW3kdkhqh7ZFoVCmnikmr29YYHCXR=7aOEneg@mail.gmail.com
To increase the flexibility of supporting different DP main link configuration
at different platform, add both data-lanes and link-frequencies property
into endpoint so that different platform can specify its own main link
combination of both data lanes and max supported link rate.
Changes in v7:
-- split yaml out of dtsi patch
-- link-frequencies from link rate to symbol rate
-- deprecation of old data-lanes property
Changes in v8:
-- correct Bjorn mail address to kernel.org
Changes in v10:
-- add menu item to data-lanes and link-frequecnis
Changes in v11:
-- add endpoint property at port@1
Changes in v12:
-- use enum for item at data-lanes and link-frequencies
Changes in v13:
-- revised changes at port@0
-- use correct ref schemas for both port@0 and port@1
-- mark both port@0 and port@1 are required
-- add line between data-lanes and link-frequencies properties
Changes in v14:
-- add "unevaluatedProperties: false: to endpoint at port@1
-- remove unnecessary quote to $ref
-- re store "$ref: /schemas/graph.yaml#/properties/port" to port@0
Changes in v15:
-- re store desciption of port@0
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/516094/
Link: https://lore.kernel.org/r/1672163103-31254-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
power-domain is required for the sc7180 dispcc GDSC but not every qcom SoC
has a similar dependency for example the apq8064.
Most Qcom SoC's using mdss-dsi-ctrl seem to have the ability to
power-collapse the MDP without collapsing DSI.
For example the qcom vendor kernel commit for apq8084, msm8226, msm8916,
msm8974.
7b5c011a77
"ARM: dts: msm: add mdss gdsc supply to dsi controller device
It is possible for the DSI controller to be active when MDP is
power collapsed. DSI controller needs to have it's own vote for
mdss gdsc to ensure that gdsc remains on in such cases."
This however doesn't appear to be the case for the apq8064 so we shouldn't
be marking power-domain as required in yaml checks.
Fixes: 4dbe55c977 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515958/
Link: https://lore.kernel.org/r/20221223021025.1646636-3-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
