Extend inet_diag_handler to allow individual protocols to report
additional data on INET_DIAG_INFO through idiag_get_aux. The size
can be dynamic and is computed by idiag_get_aux_size.
Signed-off-by: Ivan Delalande <colona@arista.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
Borkmann.
2) IPSEC ESP error paths leak memory, from Steffen Klassert.
3) We need an RCU grace period before freeing fib6_node objects, from
Wei Wang.
4) Must check skb_put_padto() return value in HSR driver, from FLorian
Fainelli.
5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
Jeffery.
6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
Dumazet.
7) Use after free when tcf_chain_destroy() called multiple times, from
Jiri Pirko.
8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.
9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
From Stefano Brivio.
10) L2TP tunnel refcount fixes from Guillaume Nault.
11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
Kauperman.
12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
phy_stop_machine(), it causes regressions for multiple people. From
Florian Fainelli.
13) When packets are sent out of br0 we have to clear the
offload_fwdq_mark value.
14) Several NULL pointer deref fixes in packet schedulers when their
->init() routine fails. From Nikolay Aleksandrov.
15) Aquantium devices cannot checksum offload correctly when the packet
is <= 60 bytes. From Pavel Belous.
16) Fix vnet header access past end of buffer in AF_PACKET, from
Benjamin Poirier.
17) Double free in probe error paths of nfp driver, from Dan Carpenter.
18) QOS capability not checked properly in DCB init paths of mlx5
driver, from Huy Nguyen.
19) Fix conflicts between firmware load failure and health_care timer in
mlx5, also from Huy Nguyen.
20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
from Eran Ben ELisha.
21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
from Michael Chan.
22) Missing MSIX vector free in bnxt_en, also from Michael Chan.
23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
Colitti.
24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.
25) bpf_setsockopts() erroneously always returns -EINVAL even on
success. Fix from Yuchung Cheng.
26) tipc_rcv() needs to linearize the SKB before parsing the inner
headers, from Parthasarathy Bhuvaragan.
27) Fix deadlock between link status updates and link removal in netvsc
driver, from Stephen Hemminger.
28) Missed locking of page fragment handling in ESP output, from Steffen
Klassert.
29) Fix refcnt leak in ebpf congestion control code, from Sabrina
Dubroca.
30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
from Christophe Jaillet.
31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
early demux, from Paolo Abeni.
32) Several info leaks in xfrm_user layer, from Mathias Krause.
33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.
34) Properly propagate obsolete state of route upwards in ipv6 so that
upper holders like xfrm can see it. From Xin Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
udp: fix secpath leak
bridge: switchdev: Clear forward mark when transmitting packet
mlxsw: spectrum: Forbid linking to devices that have uppers
wl1251: add a missing spin_lock_init()
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
kcm: do not attach PF_KCM sockets to avoid deadlock
sch_tbf: fix two null pointer dereferences on init failure
sch_sfq: fix null pointer dereference on init failure
sch_netem: avoid null pointer deref on init failure
sch_fq_codel: avoid double free on init failure
sch_cbq: fix null pointer dereferences on init failure
sch_hfsc: fix null pointer deref and double free on init failure
sch_hhf: fix null pointer dereference on init failure
sch_multiq: fix double free on init failure
sch_htb: fix crash on init failure
net/mlx5e: Fix CQ moderation mode not set properly
net/mlx5e: Fix inline header size for small packets
net/mlx5: E-Switch, Unload the representors in the correct order
net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
...
The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the
device in case a port is enslaved to a master netdev such as bridge or
bond.
Since the driver ignores events unrelated to its ports and their
uppers, it's possible to engineer situations in which the device's data
path differs from the kernel's.
One example to such a situation is when a port is enslaved to a bond
that is already enslaved to a bridge. When the bond was enslaved the
driver ignored the event - as the bond wasn't one of its uppers - and
therefore a bridge port instance isn't created in the device.
Until such configurations are supported forbid them by checking that the
upper device doesn't have uppers of its own.
Fixes: 0d65fc1304 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Nogah Frankel <nogahf@mellanox.com>
Tested-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block fixes from Jens Axboe:
"Unfortunately a few issues that warrant sending another pull request,
even if I had hoped to avoid it. This contains:
- A fix for multiqueue xen-blkback, on tear down / disconnect.
- A few fixups for NVMe, including a wrong bit definition, fix for
host memory buffers, and an nvme rdma page size fix"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: fix the definition of the doorbell buffer config support bit
nvme-pci: use dma memory for the host memory buffer descriptors
nvme-rdma: default MR page size to 4k
xen-blkback: stop blkback thread of every queue in xen_blkif_disconnect
Pull device mapper fixes from Mike Snitzer:
- A couple fixes for bugs introduced as part of the blk_status_t block
layer changes during the 4.13 merge window
- A printk throttling fix to use discrete rate limiting state for each
DM log level
- A stable@ fix for DM multipath that delays request requeueing to
avoid CPU lockup if/when the request queue is "dying"
* tag 'for-4.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm mpath: do not lock up a CPU with requeuing activity
dm: fix printk() rate limiting code
dm mpath: retry BLK_STS_RESOURCE errors
dm: fix the second dec_pending() argument in __split_and_process_bio()
Merge more fixes from Andrew Morton:
"6 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/dtc: fix '%zx' warning
include/linux/compiler.h: don't perform compiletime_assert with -O0
mm, madvise: ensure poisoned pages are removed from per-cpu lists
mm, uprobes: fix multiple free of ->uprobes_state.xol_area
kernel/kthread.c: kthread_worker: don't hog the cpu
mm,page_alloc: don't call __node_reclaim() with oom_lock held.
Commit c7acec713d ("kernel.h: handle pointers to arrays better in
container_of()") made use of __compiletime_assert() from container_of()
thus increasing the usage of this macro, allowing developers to notice
type conflicts in usage of container_of() at compile time.
However, the implementation of __compiletime_assert relies on compiler
optimizations to report an error. This means that if a developer uses
"-O0" with any code that performs container_of(), the compiler will always
report an error regardless of whether there is an actual problem in the
code.
This patch disables compile_time_assert when optimizations are disabled to
allow such code to compile with CFLAGS="-O0".
Example compilation failure:
./include/linux/compiler.h:547:38: error: call to `__compiletime_assert_94' declared with attribute error: pointer type mismatch in container_of()
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^
./include/linux/compiler.h:530:4: note: in definition of macro `__compiletime_assert'
prefix ## suffix(); \
^~~~~~
./include/linux/compiler.h:547:2: note: in expansion of macro `_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:46:37: note: in expansion of macro `compiletime_assert'
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
./include/linux/kernel.h:860:2: note: in expansion of macro `BUILD_BUG_ON_MSG'
BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \
^~~~~~~~~~~~~~~~
[akpm@linux-foundation.org: use do{}while(0), per Michal]
Link: http://lkml.kernel.org/r/20170829230114.11662-1-joe@ovn.org
Fixes: c7acec713d ("kernel.h: handle pointers to arrays better in container_of()")
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The invalidate_page callback suffered from two pitfalls. First it used
to happen after the page table lock was release and thus a new page
might have setup before the call to invalidate_page() happened.
This is in a weird way fixed by commit c7ab0d2fdc ("mm: convert
try_to_unmap_one() to use page_vma_mapped_walk()") that moved the
callback under the page table lock but this also broke several existing
users of the mmu_notifier API that assumed they could sleep inside this
callback.
The second pitfall was invalidate_page() being the only callback not
taking a range of address in respect to invalidation but was giving an
address and a page. Lots of the callback implementers assumed this
could never be THP and thus failed to invalidate the appropriate range
for THP.
By killing this callback we unify the mmu_notifier callback API to
always take a virtual address range as input.
Finally this also simplifies the end user life as there is now two clear
choices:
- invalidate_range_start()/end() callback (which allow you to sleep)
- invalidate_range() where you can not sleep but happen right after
page table update under page table lock
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Bernhard Held <berny156@gmx.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: axie <axie@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes two trivial typos in net_device_ops documentation,
related to ndo_xdp_flush callback.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TX offloads support for GRE tunneled packets by reporting the needed
netdev features.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch adds more generic PHY modes to the phy_mode enum, to
allow configuring generic PHYs to the SGMII and/or the 10GKR mode
by using the set_mode callback.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following new APIs are added:
int idr_alloc_ext(struct idr *idr, void *ptr, unsigned long *index,
unsigned long start, unsigned long end, gfp_t gfp);
void *idr_remove_ext(struct idr *idr, unsigned long id);
void *idr_find_ext(const struct idr *idr, unsigned long id);
void *idr_replace_ext(struct idr *idr, void *ptr, unsigned long id);
void *idr_get_next_ext(struct idr *idr, unsigned long *nextid);
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is an issue where the firmware fails during mlx5_load_one,
the health_care timer detects the issue and schedules a health_care call.
Then the mlx5_load_one detects the issue, cleans up and quits. Then
the health_care starts and calls mlx5_unload_one to clean up the resources
that no longer exist and causes kernel panic.
The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set
after mlx5_load_one fails. The solution is removing the bit
MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the
bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN
is redundant and we can use MLX5_INTERFACE_STATE_UP instead.
Fixes: 5fc7197d3a ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This reverts commit 45f119bf93.
Eric Dumazet says:
We found at Google a significant regression caused by
45f119bf93 tcp: remove header prediction
In typical RPC (TCP_RR), when a TCP socket receives data, we now call
tcp_ack() while we used to not call it.
This touches enough cache lines to cause a slowdown.
so problem does not seem to be HP removal itself but the tcp_ack()
call. Therefore, it might be possible to remove HP after all, provided
one finds a way to elide tcp_ack for most cases.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull NVMe fixes from Christoph:
"Three more fixes for 4.13 below:
- fix the incorrect bit for the doorbell buffer features (Changpeng Liu)
- always use a 4k MR page size for RDMA, to not get in trouble with
offset in non-4k page size systems (no-op for x86) (Max Gurtovoy)
- and a fix for the new nvme host memory buffer support to keep the
descriptor list DMA mapped when the buffer is enabled (me)"
NVMe 1.3 specification defines the Optional Admin Command Support feature
flags, bit 8 set to '1' then the controller supports the Doorbell Buffer
Config command. Bit 7 is used for Virtualization Mangement command.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: f9f38e33 ("nvme: improve performance for virtual NVMe devices")
Cc: stable@vger.kernel.org
Since the removal of NET_DMA, dmaengine.h header file shouldn't be needed
by netdevice.h anymore.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding support for updating the FW on new port mac, when port mac change
is requested by the user. This info is required by the FW as OEM
management tools require this info directly from the NIC FW.
Check device capability bit to verify the FW supports user mac.
If the FW does support it, use set_port command to notify the FW on the
new mac.
The feature is relevant only to PF port mac.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull libata fixes from Tejun Heo:
"Late fixes for libata. There's a minor platform driver fix but the
important one is READ LOG PAGE.
This is a new ATA command which is used to test some optional features
but it broke probing of some devices - they locked up instead of
failing the unknown command.
Christoph tried blacklisting, but, after finding out there are
multiple devices which fail this way, backed off to testing feature
bit in IDENTIFY data first, which is a bit lossy (we can miss features
on some devices) but should be a lot safer"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
Revert "libata: quirk read log on no-name M.2 SSD"
libata: check for trusted computing in IDENTIFY DEVICE data
libata: quirk read log on no-name M.2 SSD
sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'
Kalle Valo says:
====================
wireless-drivers-next patches for 4.14
rsi driver is getting a lot of new features lately, but as usual
active development happening on iwlwifi as well as other drivers.
I pulled wireless-drivers to fix multiple conflicts in iwlwifi and to
make it easier further development.
Major changes:
ath10k
* initial UBS bus support (no full support yet)
* add tdls support for 10.4 firmware
ath9k
* add Dell Wireless 1802
wil6210
* support FW RSSI reporting
rsi
* support legacy power save, U-APSD, rf-kill and AP mode
* RTS threshold configuration
brcmfmac
* support CYW4373 SDIO/USB chipset
iwlwifi
* some more code moved to a new directory
* add new PCI ID for 7265D
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 35f0b6a779.
We now conditionalize issuing of READ LOG PAGE on the TRUSTED
COMPUTING SUPPORTED bit in the identity data and this shouldn't be
necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
ATA-8 and later mirrors the TRUSTED COMPUTING SUPPORTED bit in word 48 of
the IDENTIFY DEVICE data. Check this before issuing a READ LOG PAGE
command to avoid issues with buggy devices. The only downside is that
we can't support Security Send / Receive for a device with an older
revision due to the conflicting use of this field in earlier
specifications.
tj: The reason we need this is because some devices which don't
support READ LOG PAGE lock up after getting issued that command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-08-27
This series contains updates to i40e and i40evf only.
Sudheer updates code comments and state variable so that adminq_subtask
will have accutate information whenever it gets scheduled.
Mariusz stores information about FEC modes, to be used to printing link
states information, so that we do not need to call admin queue when
reporting link status. Adds VF support for controlling VLAN tag
stripping via ethtool.
Jake provides the majority of changes in this series, starting with
increasing the size of the prefix buffer so that it can hold enough
characters for every possible input, which prevents snprintf truncation.
Fixed other string truncation errors/warnings produced by GCC 7.x.
Removed an unnecessary workaround for resetting XPS. Fixed an issue
where there is a mismatched affinity mask value, so initialize the value
to cpu_possible_mask and invert the logic for checking incorrect CPU vs
IRQ affinity so that the exceptional case is handled at the check.
Removed ULTRA latency mode due to several issues found and will be
looking at better solution for small packet workloads.
Akeem fixes an issue where the incorrect flag was being used to set
promiscuous mode for unicast, which was enabling promiscuous mode only
for multicast instead of unicast.
Carolyn fixes an issue where an error return value is set, but this
value can be overwritten before we actually do exit the function. So
remove the error code assignment and add code comments for better
understanding on why we do not need to set and return the error.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.
However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.
BPF_SK_SKB_STREAM_PARSER
BPF_SK_SKB_STREAM_VERDICT
This has the advantage of having a readable name and can easily be
extended in the future.
Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido reported that reading the log page on his systems fails,
so quirk it as it won't support ZBC or security protocols.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Using the same rate limiting state for different kinds of messages
is wrong because this can cause a high frequency message to suppress
a report of a low frequency message. Hence use a unique rate limiting
state per message type.
Fixes: 71a16736a1 ("dm: use local printk ratelimit")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull IOMMU fix from Joerg Roedel:
"Another fix, this time in common IOMMU sysfs code.
In the conversion from the old iommu sysfs-code to the
iommu_device_register interface, I missed to update the release path
for the struct device associated with an IOMMU. It freed the 'struct
device', which was a pointer before, but is now embedded in another
struct.
Freeing from the middle of allocated memory had all kinds of nasty
side effects when an IOMMU was unplugged. Unfortunatly nobody
unplugged and IOMMU until now, so this was not discovered earlier. The
fix is to make the 'struct device' a pointer again"
* tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix wrong freeing of iommu_device->dev
Pull staging/iio fixes from Greg KH:
"Here are few small staging driver fixes, and some more IIO driver
fixes for 4.13-rc7. Nothing major, just resolutions for some reported
problems.
All of these have been in linux-next with no reported problems"
* tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: magnetometer: st_magn: remove ihl property for LSM303AGR
iio: magnetometer: st_magn: fix status register address for LSM303AGR
iio: hid-sensor-trigger: Fix the race with user space powering up sensors
iio: trigger: stm32-timer: fix get trigger mode
iio: imu: adis16480: Fix acceleration scale factor for adis16480
PATCH] iio: Fix some documentation warnings
staging: rtl8188eu: add RNX-N150NUB support
Revert "staging: fsl-mc: be consistent when checking strcmp() return"
iio: adc: stm32: fix common clock rate
iio: adc: ina219: Avoid underflow for sleeping time
iio: trigger: stm32-timer: add enable attribute
iio: trigger: stm32-timer: fix get/set down count direction
iio: trigger: stm32-timer: fix write_raw return value
iio: trigger: stm32-timer: fix quadrature mode get routine
iio: bmp280: properly initialize device for humidity reading
This patch gives VF capability to control VLAN tag stripping via
ethtool. As rx-vlan-offload was fixed before, now the VF is able to
change it using "ethtool --offload <IF> rxvlan on/off" settings.
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
We have a MAX_LFS_FILESIZE macro that is meant to be filled in by
filesystems (and other IO targets) that know they are 64-bit clean and
don't have any 32-bit limits in their IO path.
It turns out that our 32-bit value for that limit was bogus. On 32-bit,
the VM layer is limited by the page cache to only 32-bit index values,
but our logic for that was confusing and actually wrong. We used to
define that value to
(((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1)
which is actually odd in several ways: it limits the index to 31 bits,
and then it limits files so that they can't have data in that last byte
of a page that has the highest 31-bit index (ie page index 0x7fffffff).
Neither of those limitations make sense. The index is actually the full
32 bit unsigned value, and we can use that whole full page. So the
maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG".
However, we do wan tto avoid the maximum index, because we have code
that iterates over the page indexes, and we don't want that code to
overflow. So the maximum size of a file on a 32-bit host should
actually be one page less than the full 32-bit index.
So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will
not actually be using the page of that last index (ULONG_MAX), but we
can grow a file up to that limit.
The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug
Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5
volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one
byte less), but the actual true VM limit is one page less than 16TiB.
This was invisible until commit c2a9737f45 ("vfs,mm: fix a dead loop
in truncate_inode_pages_range()"), which started applying that
MAX_LFS_FILESIZE limit to block devices too.
NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is
actually just the offset type itself (loff_t), which is signed. But for
clarity, on 64-bit, just use the maximum signed value, and don't make
people have to count the number of 'f' characters in the hex constant.
So just use LLONG_MAX for the 64-bit case. That was what the value had
been before too, just written out as a hex constant.
Fixes: c2a9737f45 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
Reported-and-tested-by: Doug Nazar <nazard@nazar.ca>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
"A small batch of fixes that should be included for the 4.13 release.
This contains:
- Revert of the 4k loop blocksize support. Even with a recent batch
of 4 fixes, we're still not really happy with it. Rather than be
stuck with an API issue, let's revert it and get it right for 4.14.
- Trivial patch from Bart, adding a few flags to the blk-mq debugfs
exports that were added in this release, but not to the debugfs
parts.
- Regression fix for bsg, fixing a potential kernel panic. From
Benjamin.
- Tweak for the blk throttling, improving how we account discards.
From Shaohua"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq-debugfs: Add names for recently added flags
bsg-lib: fix kernel panic resulting from missing allocation of reply-buffer
Revert "loop: support 4k physical blocksize"
blk-throttle: cap discard request size
The current name of vf_offload_flags indicates that the bitmap is
limited to offload related features. Make this more generic by renaming
it to vf_cap_flags, which allows for other capabilities besides
offloading to be added.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Saeed Mahameed says:
====================
mlx5-updates-2017-08-24
This series includes updates to mlx5 core driver.
From Gal and Saeed, three cleanup patches.
From Matan, Low level flow steering improvements and optimizations,
- Use more efficient data structures for flow steering objects handling.
- Add tracepoints to flow steering operations.
- Overall these patches improve flow steering rule insertion rate by a
factor of seven in large scales (~50K rules or more).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The implementation of TIOCGPTPEER has two issues.
When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong
vfsmount is passed to dentry_open. Which results in the kernel displaying
the wrong pathname for the peer.
The second is simply by caching the vfsmount and dentry of the peer it leaves
them open, in a way they were not previously Which because of the inreased
reference counts can cause unnecessary behaviour differences resulting in
regressions.
To fix these move the ioctl into tty_io.c at a generic level allowing
the ioctl to have access to the struct file on which the ioctl is
being called. This allows the path of the slave to be derived when
opening the slave through TIOCGPTPEER instead of requiring the path to
the slave be cached. Thus removing the need for caching the path.
A new function devpts_ptmx_path is factored out of devpts_acquire and
used to implement a function devpts_mntget. The new function devpts_mntget
takes a filp to perform the lookup on and fsi so that it can confirm
that the superblock that is found by devpts_ptmx_path is the proper superblock.
v2: Lots of fixes to make the code actually work
v3: Suggestions by Linus
- Removed the unnecessary initialization of filp in ptm_open_peer
- Simplified devpts_ptmx_path as gotos are no longer required
[ This is the fix for the issue that was reverted in commit
143c97cc65, but this time without breaking 'pbuilder' due to
increased reference counts - Linus ]
Fixes: 54ebbfb160 ("tty: add TIOCGPTPEER ioctl")
Reported-by: Christian Brauner <christian.brauner@canonical.com>
Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the xdp_do_generic_redirect() call fails, it trigger the
trace_xdp_exception tracepoint. It seems better to use the same
tracepoint trace_xdp_redirect, as the native xdp_do_redirect{,_map} does.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we split the scsi_request out of struct request bsg fails to
provide a reply-buffer for the drivers. This was done via the pointer
for sense-data, that is not preallocated anymore.
Failing to allocate/assign it results in illegal dereferences because
LLDs use this pointer unquestioned.
An example panic on s390x, using the zFCP driver, looks like this (I had
debugging on, otherwise NULL-pointer dereferences wouldn't even panic on
s390x):
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6403
Fault in home space mode while using kernel ASCE.
AS:0000000001590007 R3:0000000000000024
Oops: 0038 ilc:2 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: <Long List>
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.12.0-bsg-regression+ #3
Hardware name: IBM 2964 N96 702 (z/VM 6.4.0)
task: 0000000065cb0100 task.stack: 0000000065cb4000
Krnl PSW : 0704e00180000000 000003ff801e4156 (zfcp_fc_ct_els_job_handler+0x16/0x58 [zfcp])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000001 000000005fa9d0d0 000000005fa9d078 0000000000e16866
000003ff00000290 6b6b6b6b6b6b6b6b 0000000059f78f00 000000000000000f
00000000593a0958 00000000593a0958 0000000060d88800 000000005ddd4c38
0000000058b50100 07000000659cba08 000003ff801e8556 00000000659cb9a8
Krnl Code: 000003ff801e4146: e31020500004 lg %r1,80(%r2)
000003ff801e414c: 58402040 l %r4,64(%r2)
#000003ff801e4150: e35020200004 lg %r5,32(%r2)
>000003ff801e4156: 50405004 st %r4,4(%r5)
000003ff801e415a: e54c50080000 mvhi 8(%r5),0
000003ff801e4160: e33010280012 lt %r3,40(%r1)
000003ff801e4166: a718fffb lhi %r1,-5
000003ff801e416a: 1803 lr %r0,%r3
Call Trace:
([<000003ff801e8556>] zfcp_fsf_req_complete+0x726/0x768 [zfcp])
[<000003ff801ea82a>] zfcp_fsf_reqid_check+0x102/0x180 [zfcp]
[<000003ff801eb980>] zfcp_qdio_int_resp+0x230/0x278 [zfcp]
[<00000000009b91b6>] qdio_kick_handler+0x2ae/0x2c8
[<00000000009b9e3e>] __tiqdio_inbound_processing+0x406/0xc10
[<00000000001684c2>] tasklet_action+0x15a/0x1d8
[<0000000000bd28ec>] __do_softirq+0x3ec/0x848
[<00000000001675a4>] irq_exit+0x74/0xf8
[<000000000010dd6a>] do_IRQ+0xba/0xf0
[<0000000000bd19e8>] io_int_handler+0x104/0x2d4
[<00000000001033b6>] enabled_wait+0xb6/0x188
([<000000000010339e>] enabled_wait+0x9e/0x188)
[<000000000010396a>] arch_cpu_idle+0x32/0x50
[<0000000000bd0112>] default_idle_call+0x52/0x68
[<00000000001cd0fa>] do_idle+0x102/0x188
[<00000000001cd41e>] cpu_startup_entry+0x3e/0x48
[<0000000000118c64>] smp_start_secondary+0x11c/0x130
[<0000000000bd2016>] restart_int_handler+0x62/0x78
[<0000000000000000>] (null)
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<000003ff801e41d6>] zfcp_fc_ct_job_handler+0x3e/0x48 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt
This patch moves bsg-lib to allocate and setup struct bsg_job ahead of
time, including the allocation of a buffer for the reply-data.
This means, struct bsg_job is not allocated separately anymore, but as part
of struct request allocation - similar to struct scsi_cmd. Reflect this in
the function names that used to handle creation/destruction of struct
bsg_job.
Reported-by: Steffen Maier <maier@linux.vnet.ibm.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Fixes: 82ed4db499 ("block: split scsi_request out of struct request")
Cc: <stable@vger.kernel.org> #4.11+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current code stores fte_match_param in the software representation
of FTEs and FGs. fte_match_param contains a large reserved area at the
bottom of the struct. Since downstream patches are going to hash this
part, we would like to avoid doing so on a reserved part.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5_core_wq is no longer being used and should be removed
from the code.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The optimisation it does is broken when the 'new' register value has a
variable offset and the 'old' was constant. I broke it with my pointer
types unification (see Fixes tag below), before which the 'new' value
would have type PTR_TO_MAP_VALUE_ADJ and would thus not compare equal;
other changes in that patch mean that its original behaviour (ignore
min/max values) cannot be restored.
Tests on a sample set of cilium programs show no change in count of
processed instructions.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename skb_pad() into __skb_pad() and make it take a third argument:
free_on_error which controls whether kfree_skb() should be called or
not, skb_pad() directly makes use of it and passes true to preserve its
existing behavior. Do exactly the same thing with __skb_put_padto() and
skb_put_padto().
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit c8c03f1858.
It turns out that while fixing the ptmx file descriptor to have the
correct 'struct path' to the associated slave pty is a really good
thing, it breaks some user space tools for a very annoying reason.
The problem is that /dev/ptmx and its associated slave pty (/dev/pts/X)
are on different mounts. That was what caused us to have the wrong path
in the first place (we would mix up the vfsmount of the 'ptmx' node,
with the dentry of the pty slave node), but it also means that now while
we use the right vfsmount, having the pty master open also keeps the pts
mount busy.
And it turn sout that that makes 'pbuilder' very unhappy, as noted by
Stefan Lippers-Hollmann:
"This patch introduces a regression for me when using pbuilder
0.228.7[2] (a helper to build Debian packages in a chroot and to
create and update its chroots) when trying to umount /dev/ptmx (inside
the chroot) on Debian/ unstable (full log and pbuilder configuration
file[3] attached).
[...]
Setting up build-essential (12.3) ...
Processing triggers for libc-bin (2.24-15) ...
I: unmounting dev/ptmx filesystem
W: Could not unmount dev/ptmx: umount: /var/cache/pbuilder/build/1340/dev/ptmx: target is busy
(In some cases useful info about processes that
use the device is found by lsof(8) or fuser(1).)"
apparently pbuilder tries to unmount the /dev/pts filesystem while still
holding at least one master node open, which is arguably not very nice,
but we don't break user space even when fixing other bugs.
So this commit has to be reverted.
I'll try to figure out a way to avoid caching the path to the slave pty
in the master pty. The only thing that actually wants that slave pty
path is the "TIOCGPTPEER" ioctl, and I think we could just recreate the
path at that time.
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Eric W Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Fix IGMP handling wrt VRF, from David Ahern.
2) Fix timer access to freed object in dccp, from Eric Dumazet.
3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are
triggerable by userspace. Also from Eric Dumazet.
4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian
King.
5) Correct datagram peek handling of empty SKBs, from Matthew Dawson.
6) Fix use after free in TIPC, from Eric Dumazet.
7) When replacing a route in ipv6 we need to reset the round robin
pointer, from Wei Wang.
8) Fix bug in pci_find_pcie_root_port() which was unearthed by the
relaxed ordering changes, from Thierry Redding. I made sure to get
an explicit ACK from Bjorn this time around :-)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: repair fib6 tree in failure case
net_sched: fix order of queue length updates in qdisc_replace()
tools lib bpf: improve warning
switchdev: documentation: minor typo fixes
bpf, doc: also add s390x as arch to sysctl description
net: sched: fix NULL pointer dereference when action calls some targets
rxrpc: Fix oops when discarding a preallocated service call
irda: do not leak initialized list.dev to userspace
net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled
PCI: Allow PCI express root ports to find themselves
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set
ipv6: reset fn->rr_ptr when replacing route
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
tipc: fix use-after-free
tun: handle register_netdevice() failures properly
datagram: When peeking datagrams with offset < 0 don't skip empty skbs
bpf, doc: improve sysctl knob description
netxen: fix incorrect loop counter decrement
nfp: fix infinite loop on umapping cleanup
...
This was reported many times, and this was even mentioned in commit
52ee2dfdd4 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.
We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups. Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.
Reported-by: Troy Kensinger <tkensinger@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jonathan writes:
Second set of IIO fixes for the 4.13 cycle.
Given the late stage of this series, some more involved fixes have been
held back for the upcoming merge window.
The hid-sensor issue has been causing problems for a long time so it
is great to have that one finally fixed! No more bug reports for the
userspace guys (well about that anyway).
* documentation
- some warning fixes due to missing colons in kernel-doc.
* adis16480
- fix accel scale factor.
* bmp280
- properly initialize the device for humidity readings - without this
the humidity readings may be skipped and a magic value of 0x8000 returned.
* hid-sensor-strigger
- fix a race with user space when powering up the sensor.
* ina291
- Avoid an underflow for the sleeping time as a result of supporting the
fastest rates.
* st-magnetometer
- Fix the status register address for hte LSM303AGR,
- Remove the ihl property for LSM303AGR as the sensor doesn't support
active low for the dataready line.
* stm32-adc
- Fix use of a common clock rate.
* stm32-timer
- fix the quadrature mode get routine to account for the magic 0 value.
set on boot.
- fix the return value of write_raw,
- fix the get/set down count direction as the enum value was not being
converted to the relevant bit field,
- add an enable attribute to actually turn it on when in encoder mode,
- missing mask when reading the trigger mode.
