Pull tty/serial driver updates from Greg KH:
"Here is the big tty and serial driver update for 4.8-rc1.
Lots of good cleanups from Jiri on a number of vt and other tty
related things, and the normal driver updates. Full details are in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
tty/serial: atmel: enforce tasklet init and termination sequences
serial: sh-sci: Stop transfers in sci_shutdown()
serial: 8250_ingenic: drop #if conditional surrounding earlycon code
serial: 8250_mtk: drop !defined(MODULE) conditional
serial: 8250_uniphier: drop !defined(MODULE) conditional
earlycon: mark earlycon code as __used iif the caller is built-in
tty/serial/8250: use mctrl_gpio helpers
serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
serial: mctrl_gpio: add modem control read routine
tty/serial/8250: make UART_MCR register access consistent
serial: 8250_mid: Read RX buffer on RX DMA timeout for DNV
serial: 8250_dma: Export serial8250_rx_dma_flush()
dmaengine: hsu: Export hsu_dma_get_status()
tty: serial: 8250: add CON_CONSDEV to flags
tty: serial: samsung: add byte-order aware bit functions
tty: serial: samsung: fixup accessors for endian
serial: sirf: make fifo functions static
serial: mps2-uart: make driver explicitly non-modular
serial: mvebu-uart: free the IRQ in ->shutdown()
serial/bcm63xx_uart: use correct alias naming
...
Pull staging and IIO driver updates from Greg KH:
"Here is the big Staging and IIO driver update for 4.8-rc1.
We ended up adding more code than removing, again, but it's not all
that bad. Lots of cleanups all over the staging tree, and new IIO
drivers, full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (417 commits)
drivers:iio:accel:mma8452: removed unwanted return statements
drivers:iio:accel:mma8452: added cleanup provision in case of failure.
iio: Add iio.git tree to MAINTAINERS
iio:st_pressure: clean useless static channel initializers
iio:st_pressure:lps22hb: temperature support
iio:st_pressure:lps22hb: open drain support
iio:st_pressure: temperature triggered buffering
iio:st_pressure: document sampling gains
iio:st_pressure: align storagebits on power of 2
iio:st_sensors: align on storagebits boundaries
staging:iio:lis3l02dq drop separate driver
iio: accel: st_accel: Add lis3l02dq support
iio: adc: add missing of_node references to iio_dev
iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
iio: potentiometer: Fix typo in Kconfig
iio: potentiometer: mcp4531: Add device tree binding
iio: potentiometer: mcp4531: Add device tree binding documentation
iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
iio:imu:mpu6050: icm20608 initial support
iio: adc: max1363: Add device tree binding
...
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.8-rc1.
Not a lot of stuff, but it's all over the place, full details are in
the shortlog. All of these have been in linux-next with no reported
issues for a while"
* tag 'char-misc-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (49 commits)
lkdtm: silence warnings about function declarations
lkdtm: hide unused functions
intel_th: pci: Add Kaby Lake PCH-H support
intel_th: Fix a deadlock in modprobing
dsp56k: prevent a harmless underflow
chardev: add missing line break in pr_warn
lkdtm: use struct arrays instead of enums
lkdtm: move jprobe entry points to start of source
lkdtm: reorganize module paramaters
lkdtm: rename globals for clarity
lkdtm: rename "count" to "crash_count"
lkdtm: remove intentional off-by-one array access
lkdtm: split remaining logic bug tests to separate file
lkdtm: split heap corruption tests to separate file
lkdtm: split memory permissions tests to separate file
lkdtm: split usercopy tests to separate file
lkdtm: drop "alloc_size" parameter
lkdtm: add usercopy test for blocking kernel text
extcon: adc-jack: add suspend/resume support
extcon: add missing of_node_put after calling of_parse_phandle
...
Make kernel load address explicit, independent of the selected MMU
configuration and configurable from Kconfig. Do not restrict it to the
first 512MB of the physical address space.
Cleanup kernel memory layout macros:
- rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR;
- drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS;
- introduce PHYS_OFFSET and use it in __va and __pa definitions;
- synchronize MMU/noMMU vectors, drop unused NMI vector;
- replace hardcoded vectors offset of 0x3000 with Kconfig symbol.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
MMUv3 is able to support low memory bigger than 128MB.
Implement 256MB and 512MB KSEG layouts:
- add Kconfig selector for KSEG layout;
- add KSEG base address, size and alignment definitions to
arch/xtensa/include/asm/kmem_layout.h;
- use new definitions in TLB initialization;
- add build time memory map consistency checks.
See Documentation/xtensa/mmu.txt for the details of new memory layouts.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
References at the rst files for C functions generated via
kernel-doc should use :c:func:.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reorganize the order of the document, putting the chapters
on a more logical order and renaming some sections.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that the only remaining chapters at v4l2-framework are
the introduction ones, let' s rename the file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the v4l2 clocks stuff from v4l2-framework to a separate
file and adds an attention that came from the v4l2-clk.h.
Note: as this is meant to be a temporary kAPI, and it is
used only by two drivers (soc_camera and em28xx), where
the first one is in deprecation process, it probably not
a worth effort to document its header.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the v4l2 event-specific text from v4l2-framework.rst
to v4l2-event.rst. That helps to keep the text together with
the functions it describes, and makes easier to identify
documentation gaps.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we merged the videobuf chapter at the kABI section, and it
is a way more complete, just remove the small videobuf chapter
that came from framework.txt.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add cross-references for the functions/structs and add
the markup tags to improve its display.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add documentation for v4l2-dev.h, and put it at v4l2-framework.rst,
where struct video_device is currently documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some subdev-specific functions at v4l2-common.h
that are mentioned at v4l2-subdev.rst.
Document them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The two new sections were missing cross-references, and had
some other minor issues with the markups. Add such things.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are two additional subdev-specific sections at the
v4l2-framework file. Move them to the subdev chapter, in order
to better organize the book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Enrich the subdevice description by linking it to the
functions and structs from v4l2-subdev.h.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are lots of documentation about V4L2 subdevices at
v4l2-framework.rst. Move them to its specific chapter at
v4l2-subdev.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This document describes the main kAPI interfaces for the
v4l2-device.h header. Add cross references to the documentation
produced via kernel-doc.
While here, also use monotonic font for constants.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Part of the contents of v4l2-framework is related to the
kAPI defined by v4l2-device. Move such contents to the
v4l2-device.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sphinx produce a 1:1 mapping between a rst file and an html file.
So, we need to split the kernel-doc tags on multiple documents.
A side effect is that we're now having a better name for each
section of the kAPI documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The functions at v4l2-device.h are not using the proper
markups. Add it, and include at the v4l2-core.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The kAPI, v4l-drivers and dvb-drivers never used the
GNU FDL license. The addition of such license header were
just due to copy-and-paste. So, let's fix it.
As the media_kapi were part of device-drivers.tmp, it is
under GPL v2+.
The other two books is an agregation of files without any
license explicitly specified. So, they're all bound to the
Kernel's COPYING license. So, they're GPL v2 only.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
