If both legacy and device-tree machines are mixed in the same defconfig,
the legacy boards don't boot up anymore with gpio request deferral
errors.
This is seen when attempting to run akita, borzoi, spitz, terrier, or
tosa in qemu with pxa_defconfig.
The real reason behind is that gpio handling for pxa in its current
state cannot be built for _both_ a devicetree machine (ie. pxa-dt.c) and
a non devicetree machine (ie. corgi, tosa, ...).
This is turn is because for devicetree a pinctrl is enforced for the
machine, and a pinctrl driver is required. If it's not available,
pxa_gpio_request() fails on pinctrl_request_gpio() and returns
-EPROBE_DEFER. It was introduced by commit f806dac593
("ARM: pxa: activate pinctrl for device-tree machines").
Now the true chicken and egg problem is than machine files,
ie. arch/arm/mach-pxa/xxx.c are using gpio before the drivers are
probed, in the init_machine() function, and that's why pinctrl/gpio for
legacy machine files is a bit difficult.
As for now, to keep the compilation coverage and testing of legacy
machines, this patch removes the 2 devicetree machines from
pxa_defconfig.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
The Wandboard Quad can make use of the cpufreq support provided by the
driver. Enable it and its dependency, REGULATOR_ANATOP, by default.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Wandboard Quad comes with a SATA port. Enable the IMX SATA driver by
default to make it easy to have the root filesystem on it.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UBIFS is commonly used on Marvell EBU v7 platforms to store the root
file-system, so it makes sense to have those options enabled by default
in mvebu_v7_defconfig.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Marvell EBU v7 platforms contain various MTD devices, therefore it makes
sense to allow configuring the MTD partition tables via the kernel command
line.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Build audio support for DA850-based devices as modules in the default
defconfig.
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It's been awhile since a cleanup was done. Regenerate the default settings by
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The patch that this was preparing for made it into neither v4.7 nor
v4.8, so we should back this out as well to avoid the opposite
warning:
arch/arm/configs/aspeed_g5_defconfig:62:warning: symbol value '1' invalid for PRINTK_TIME
arch/arm/configs/aspeed_g4_defconfig:61:warning: symbol value '1' invalid for PRINTK_TIME
Sorry for not catching this earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0ef659a300 ("ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME")
Cc: stable@vger.kernel.org # v4.7
Merge "omap2plus_defconfig fix for v4.8 merge window" from Tony Lindgren:
A defconfig update for omap2plus_defconfig to fix changed USB
Kconfig dependencies for v4.8 merge window. Otherwise things
like USB Ethernet on omap3 beagle, omap4 panda and omap5-uevm
won't work without manual configuration.
* tag 'omap-for-v4.8/defconfig-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
Enable ADC and DAC IIO drivers for LPC18xx/43xx SoCs.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Allwinner defconfig changes for 4.8" from Maxime Ripard:
Two patches to enable the DRM driver in the sunxi and multi_v7 defconfig.
* tag 'sunxi-defconfig-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable sun4i DRM driver
ARM: multi_v7: Enable sun4i DRM driver
Renesas ARM Based SoC Defconfig Updates for v4.8
* Enable newly added support for r8a7792 SoC in multi_v7 and shmobile
defconfigs
* tag 'renesas-defconfig-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
To allow regression build testing of multi v4t systems, add a
multi_v4t_defconfig, similar to the multi_v5(v7)_defconfig.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung defconfig update for v4.8, part 2:
1. Enable Virtual Video Test Driver on nulti_v7 and exynos defconfigs.
Useful for testing.
* tag 'samsung-defconfig-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
Signed-off-by: Olof Johansson <olof@lixom.net>
The i.MX defconfig update for 4.8:
- Enable TOUCHSCREEN_ADS7846, USB_FUNCTIONFS and USB_USBNET support
* tag 'imx-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: imx_v6_v7_defconfig: build in usbnet to support NFS for non-ethernet board
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM Based defconfig Updates for v4.8
* Enable MSM9615 board support
* Enable MSM8660 pinctrl support
* tag 'qcom-defconfig-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: configs: qualcomm: Add MDM9615 missing defconfigs
ARM: defconfig: enable the MSM8660 pin controller
Signed-off-by: Olof Johansson <olof@lixom.net>
SoCFPGA defconfig updates for v4.8
- enable PL330 DMA, PCIe, Touchscreen and USB Mass Storage
* tag 'socfpga_defconfig_updates_for_v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: enable PL330 DMA in socfpga_defconfig
ARM: socfpga: add PCIe to socfpga_defconfig
ARM: socfpga: Update socfpga_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Enable the PL330 DMA and DMATEST on SoCFPGA.
make savedefconfig says CONFIG_FHANDLE is not needed in the defconfig,
remove it.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v2: Also enable DMATEST as a kernel module
This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
the AHCI controller and SATA PHY drivers
- Florian removes the bcm_defconfig file which is no longer useful and updates
multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
Broadcom Kona platforms
Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof
* tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux:
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
ARM: multi_v7_defconfig: Enable Broadcom AHCI
ARM: multi_v7_defconfig: Enable BRCMSTB networking
ARM: multi_v7_defconfig: Enable BCM63xx
Signed-off-by: Olof Johansson <olof@lixom.net>
We have everything we need in multi_v7_defconfig that exists in
bcm_defconfig, so get rid of that file to reduce the maintenance burden.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to get rid of bcm_defconfig, enable this driver which is needed
by some Broadcom SoCs based on the Kona architecture to reboot.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed
for system reboot, we just turn it on as a module.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable the Broadcom AHCI driver and its companion PHY driver to get
functional SATA3 support.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the following bits:
CONFIG_TOUCHSCREEN_STMPE
- STMPE touchscreen support, needed on MCVEVK as it contains the
chip. This also enables the STMPE MFD device and touchscreen
input support.
CONFIG_USB_STORAGE
- USB storage support is often used, so enable it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Defconfig changes for 4.8:
- Add at91sam9 platforms in multi_v5
* tag 'at91-ab-4.8-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: multi_v5_defconfig: enable Atmel platforms
Signed-off-by: Olof Johansson <olof@lixom.net>
Newer Keystone 2 devices utilize pinmuxing. Enable PINCTRL SINGLE
which is used to handle pinmuxing.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations. Enable the driver for it - s5p-secss to
utilize the hardware acceleration.
Currently the s5p-secss driver supports AES in CBC and ECB modes.
However its usefulness could be doubted. Excerpt of tests on Odroid XU3
(Exynos5422), for 256 bit key, encryption, performance CPU freq governor:
algorithm | block size [b] | average speed [MB/s] |
cbc-aes-s5p | 16 | 11.5 |
cbc-aes-s5p | 64 | 25.4 |
cbc-aes-s5p | 256 | 41.0 |
cbc-aes-s5p | 1024 | 47.4 |
cbc-aes-s5p | 8192 | 49.0 |
cbc(aes-generic) | 16 | 0.4 |
cbc(aes-generic) | 64 | 1.8 |
cbc(aes-generic) | 256 | 6.6 |
cbc(aes-generic) | 1024 | 25.2 |
cbc(aes-generic) | 8192 | 83.1 |
Anyway enable the driver so it will get some testing coverage by
community.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
