Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous assumption that there will be an optimize_bandwidth call
following every prepare_bandwidth call was incorrect and caused small
inaccuracies in logging, as some info was only updated in later prepare
calls.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ethan Bitnun <Ethan.Bitnun@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Some issues may require a trace of the previous SMU messages from DC to
understand the context and aid in debugging. Actual logging to be
implemented when needed.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SMU uses discrete dpp and disp clock levels. When we submit SMU request
for clock changes in Mhz we need to floor the requested value from Khz so
SMU will choose the next higher clock level in Khz to set. If we ceil to
Mhz, SMU will have to choose the next higher clock level after the ceil,
which could result in unnecessarily jumpping to the next level.
For example, we request 1911,111Khz which is exactly one of the SMU preset
level. If we pass 1912Mhz, SMU will choose 2150,000 khz. If we pass
1911Mhz, SMU will choose 1911,111kHz, which is the expected value.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some debug tools, sometimes wrap around to multiple lines which causes
issues with the DPM test script while it is looking for the logs. Need a
way to tell when the log is finished.
[How]
Added "LOG_END" to the end of the log.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
More information is desired for the test tools.
[How]
Refactored get_subvp_visual_confirm_color and
get_mclk_switch_visual_confirm_color to support the new method of
storing the p_state type, which was changed so that it could also be
saved and output by the DPM log. Ensured that the p_state type is kept
updated by looping through the pipes within commit_planes_for_stream.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When we issue hard min request to PMFW, the ack back does not
guarantee the request has been fulfilled.
[How]
Add new PMFW message to check if the hard min request has been
completed. Returned bit mask indicates which clock requests are
completed. Check PMFW version before using message
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In overclocking scenarios the max memclk could be higher
than the DC mode limit. However, for configs that don't
support MCLK switching we need to set the max memclk to
the overclocked max instead of the DC mode max or we
could result in underflow.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- DC mode clock switch interface was previously only executed
for DCN303. Enable it for DCN32x so that the interface is called
correctly
- Assign function pointers for DCN32x that are used in the dc mode
interface
- Update the dc mode interface to work generically for each ASIC
- In update_clocks, make sure to consider softmax if we're in DC mode
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-6.5-2023-06-02:
amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero
ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
UAPI:
- Add new ctx query flag to better handle GPU resets
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3
amd-drm-next-6.5-2023-06-09:
amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class
amdkfd:
- Add debugger support for gdb
radeon:
- Fix possible UAF
drm:
- Add Colorspace functionality
UAPI:
- Add debugger interface for enabling gdb
Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
Why:
Limit maximum clock speeds to DC mode limits for DC mode systems
How:
Store DC mode limits when individual clocks are initialized and
cap the values when building the clock table
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Update clocks is skipped in the GPU overclock sequence
- However, we still need to update DISPCLK, DPPCLK, and DTBCLK
because the GPU overclock sequence could temporarily disable
ODM 2:1 combine because we disable all planes in the sequence
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Previously update_clocks was overriding pstate support if
it checked that there were no planes
- However, P-State support should be determined in validation
phase instead
- This fixes an issue where a transition from FPO -> no planes
expects UCLK MAX, but update_clocks was overriding to set
UCLK to min
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
- Implement interface to program DTBCLK DTO’s
according to reference DTBCLK returned by PMFW
- This is required because DTO programming
requires exact DTBCLK reference freq or it could
result in underflow
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- On init if a display is connected, we need to maintain the DISPCLK
frequency
- Even though DPG_EN=1, the display still requires the correct
timing or it could cause audio corruption (if DISPCLK freq
is reduced)
- Read the current DISPCLK freq and request the same value to ensure
the timing is valid and unchanged
- However, add option to do a full pipe power down (including link)
which will also avoid audio related issues
- Disabled for the time being on dcn32
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfree() & vfree() internally performs NULL check on the pointer handed
to it and take no action if it indeed is NULL. Hence there is no need
for a pre-check of the memory pointer before handing it to
kfree()/vfree().
Issue reported by ifnullfree.cocci Coccinelle semantic patch script.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DTB DTO is programmed more correctly during
link enable. Programming them on CLK update
which may arrive frequently and sporadically
per flip throws off DTB DTO.
[How]
Remove DTB DTO programming on clock update.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When transitioning FRL / DP2 is not required, we will always request
DTBCLK = 0Mhz, but PMFW returns the min freq
- This causes us to make DTBCLK requests every time we call optimize
after transitioning from FRL to non-FRL
- If DTBCLK is not required, request the min instead (then we only need
to make 1 extra request at boot time)
- Also when programming PIPE_DTO_SRC_SEL, don't programming for DP
first, just programming once for the required selection (programming
DP on an HDMI connection then switching back causes corruption)
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
In some cases, DCFCLK hardmin requests are not acknowledged by SMU as
the requested clock does not have a compatible ratio with current FCLK,
and it cannot be changed as FCLK P-state is not allowed.
[HOW?]
Allow FCLK p-state change prior to changing DCFCLK hardmin.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For individual feature testing, PMFW may not report all clock
values back. Driver will default them to 0 but this will
cause the BB table to be skipped and default to one state
with max clocks.
[How]
Add helper function to scan through initial clock values and
populate them with default clock limits so that BB table
can be built.
Add dpm_enabled flag to check when DPM is not enabled and
to trigger helper function.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are working to isolate FPU operations inside the DML folder, and the
file dcn32_clk_mgr has some of these operations. This commit moves the
FPU operations inside the clock manager and creates the dcn32_fpu file
to aggregate those operations. Note that there is no functional change
ere, just moving code from one part to another.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
