mirror of
https://github.com/torvalds/linux.git
synced 2026-05-05 23:05:25 -04:00
c78ae7b71ed66a180708377b45042ef77efc840e
16983 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ming Lei
|
c78ae7b71e |
selftests: ublk: add test for checking zero copy related parameter
ublk zero copy usually requires to set dma and segment parameter correctly, so hard-code null target's dma & segment parameter in non-default value, and verify if they are setup correctly by ublk driver. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250327095123.179113-12-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Ming Lei
|
8c77861436 |
selftests: ublk: add more tests for covering MQ
Add test test_generic_02.sh for covering IO dispatch order in case of MQ. Especially we just support ->queue_rqs() which may affect IO dispatch order. Add test_loop_05.sh and test_stripe_03.sh for covering MQ. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250327095123.179113-11-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
ca0b04ba0b |
Merge tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux
Pull io_uring zero-copy receive support from Jens Axboe:
"This adds support for zero-copy receive with io_uring, enabling fast
bulk receive of data directly into application memory, rather than
needing to copy the data out of kernel memory.
While this version only supports host memory as that was the initial
target, other memory types are planned as well, with notably GPU
memory coming next.
This work depends on some networking components which were queued up
on the networking side, but have now landed in your tree.
This is the work of Pavel Begunkov and David Wei. From the v14 posting:
'We configure a page pool that a driver uses to fill a hw rx queue
to hand out user pages instead of kernel pages. Any data that ends
up hitting this hw rx queue will thus be dma'd into userspace
memory directly, without needing to be bounced through kernel
memory. 'Reading' data out of a socket instead becomes a
_notification_ mechanism, where the kernel tells userspace where
the data is. The overall approach is similar to the devmem TCP
proposal
This relies on hw header/data split, flow steering and RSS to
ensure packet headers remain in kernel memory and only desired
flows hit a hw rx queue configured for zero copy. Configuring this
is outside of the scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is
that io_uring is used for the uAPI and the lifetime of all objects
are bound to an io_uring instance. Data is 'read' using a new
io_uring request type. When done, data is returned via a new shared
refill queue. A zero copy page pool refills a hw rx queue from this
refill queue directly. Of course, the lifetime of these data
buffers are managed by io_uring rather than the networking stack,
with different refcounting rules.
This patchset is the first step adding basic zero copy support. We
will extend this iteratively with new features e.g. dynamically
allocated zero copy areas, THP support, dmabuf support, improved
copy fallback, general optimisations and more'
In a local setup, I was able to saturate a 200G link with a single CPU
core, and at netdev conf 0x19 earlier this month, Jamal reported
188Gbit of bandwidth using a single core (no HT, including soft-irq).
Safe to say the efficiency is there, as bigger links would be needed
to find the per-core limit, and it's considerably more efficient and
faster than the existing devmem solution"
* tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux:
io_uring/zcrx: add selftest case for recvzc with read limit
io_uring/zcrx: add a read limit to recvzc requests
io_uring: add missing IORING_MAP_OFF_ZCRX_REGION in io_uring_mmap
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
|
||
|
Linus Torvalds
|
7288511606 |
Merge tag 'landlock-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This brings two main changes to Landlock:
- A signal scoping fix with a new interface for user space to know if
it is compatible with the running kernel.
- Audit support to give visibility on why access requests are denied,
including the origin of the security policy, missing access rights,
and description of object(s). This was designed to limit log spam
as much as possible while still alerting about unexpected blocked
access.
With these changes come new and improved documentation, and a lot of
new tests"
* tag 'landlock-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (36 commits)
landlock: Add audit documentation
selftests/landlock: Add audit tests for network
selftests/landlock: Add audit tests for filesystem
selftests/landlock: Add audit tests for abstract UNIX socket scoping
selftests/landlock: Add audit tests for ptrace
selftests/landlock: Test audit with restrict flags
selftests/landlock: Add tests for audit flags and domain IDs
selftests/landlock: Extend tests for landlock_restrict_self(2)'s flags
selftests/landlock: Add test for invalid ruleset file descriptor
samples/landlock: Enable users to log sandbox denials
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_*_EXEC_* flags
landlock: Log scoped denials
landlock: Log TCP bind and connect denials
landlock: Log truncate and IOCTL denials
landlock: Factor out IOCTL hooks
landlock: Log file-related denials
landlock: Log mount-related denials
landlock: Add AUDIT_LANDLOCK_DOMAIN and log domain status
landlock: Add AUDIT_LANDLOCK_ACCESS and log ptrace denials
...
|
||
|
Linus Torvalds
|
7b667acd69 |
Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan: - Remove support for IBM Cell Blades - SMP support for microwatt platform - Support for inline static calls on PPC32 - Enable pmu selftests for power11 platform - Enable hardware trace macro (HTM) hcall support - Support for limited address mode capability - Changes to RMA size from 512 MB to 768 MB to handle fadump - Misc fixes and cleanups Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann, Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav Jain, and Venkat Rao Bagalkote. * tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits) powerpc/kexec: fix physical address calculation in clear_utlb_entry() crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD powerpc: Fix 'intra_function_call not a direct call' warning powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7 powerpc/microwatt: Add SMP support powerpc: Define config option for processors with broadcast TLBIE powerpc/microwatt: Define an idle power-save function powerpc/microwatt: Device-tree updates powerpc/microwatt: Select COMMON_CLK in order to get the clock framework net: toshiba: Remove reference to PPC_IBM_CELL_BLADE net: spider_net: Remove powerpc Cell driver cpufreq: ppc_cbe: Remove powerpc Cell driver genirq: Remove IRQ_EDGE_EOI_HANDLER docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR powerpc: Remove UDBG_RTAS_CONSOLE powerpc/io: Use standard barrier macros in io.c powerpc/io: Rename _insw_ns() etc. powerpc/io: Use generic raw accessors ... |
||
|
Linus Torvalds
|
a7e135fe59 |
Merge tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- Improve the ftracetest selftests:
- Expand the tprobe event test to check if it can correctly find the
wrong format tracepoint name.
- Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
- Add a new dynamic events argument limitation test case which
checks max number of probe arguments.
* tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Add comments about entry data storing code
selftests/ftrace: Add dynamic events argument limitation test case
selftests/ftrace: Add new syntax error test
selftests/ftrace: Expand the tprobe event test to check wrong format
tracing: probe-events: Log error for exceeding the number of arguments
|
||
|
Linus Torvalds
|
dcf9f31c62 |
Merge tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek: - Add a selftest for tracing of a livepatched function - Skip a selftest when kprobes are not using ftrace - Some documentation clean up * tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests: livepatch: test if ftrace can trace a livepatched function selftests: livepatch: add new ftrace helpers functions selftest/livepatch: Only run test-kprobe with CONFIG_KPROBES_ON_FTRACE docs: livepatch: move text out of code block livepatch: Add comment to clarify klp_add_nops() |
||
|
Linus Torvalds
|
8e324a5c98 |
Merge tag 'linux_kselftest-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan: - Fix bugs and clean up code in tracing, ftrace, and user_events tests - Add missing executables to ftrace gitignore * tag 'linux_kselftest-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: add 'poll' binary to gitignore selftests/ftrace: Use readelf to find entry point in uprobe test selftests/user_events: Fix failures caused by test code selftests/tracing: Allow some more tests to run in instances selftests/ftrace: Clean up triggers after setting them selftests/tracing: Test only toplevel README file not the instances |
||
|
Masami Hiramatsu (Google)
|
581a7b26ab |
selftests/ftrace: Add dynamic events argument limitation test case
Add argument limitation test case for dynamic events. This is a boudary check for the maximum number of the probe event arguments. Link: https://lore.kernel.org/all/174055078295.4079315.14702008939511417359.stgit@mhiramat.tok.corp.google.com/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Masami Hiramatsu (Google)
|
168ccc9b99 |
selftests/ftrace: Add new syntax error test
Add BAD_TP_NAME syntax error message check. Link: https://lore.kernel.org/all/174055077485.4079315.3624012056141021755.stgit@mhiramat.tok.corp.google.com/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Masami Hiramatsu (Google)
|
381af2ab91 |
selftests/ftrace: Expand the tprobe event test to check wrong format
Expand the tprobe event test case to check wrong tracepoint format. Link: https://lore.kernel.org/all/174055076681.4079315.16941322116874021804.stgit@mhiramat.tok.corp.google.com/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Petr Mladek
|
d11f0d172a | Merge branch 'for-6.15/ftrace-test' into for-linus | ||
|
Linus Torvalds
|
1a9239bb42 |
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
||
|
Linus Torvalds
|
592329e5e9 |
Merge tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
|
||
|
Linus Torvalds
|
2e3fcbcc3b |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr, mpt3sas) and the removal of cxlflash. The only non-trivial core change is an addition to unit attention handling to recognize UAs for power on/reset and new media so the tape driver can use it" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits) scsi: st: Tighten the page format heuristics with MODE SELECT scsi: st: ERASE does not change tape location scsi: st: Fix array overflow in st_setup() scsi: target: tcm_loop: Fix wrong abort tag scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag scsi: hisi_sas: Fixed failure to issue vendor specific commands scsi: fnic: Remove unnecessary NUL-terminations scsi: fnic: Remove redundant flush_workqueue() calls scsi: core: Use a switch statement when attaching VPD pages scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2 scsi: ufs: renesas: Add reusable functions scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings scsi: ufs: renesas: Remove register control helper function scsi: ufs: renesas: Add register read to remove save/set/restore scsi: ufs: renesas: Replace init data by init code scsi: ufs: dt-bindings: renesas,ufs: Add calibration data scsi: mpi3mr: Task Abort EH Support scsi: storvsc: Don't report the host packet status as the hv status scsi: isci: Make most module parameters static scsi: megaraid_sas: Make most module parameters static ... |
||
|
Linus Torvalds
|
91928e0d3c |
Merge tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
|
||
|
Mickaël Salaün
|
a5c369e45b |
selftests/landlock: Add audit tests for network
Test all network blockers: - net.bind_tcp - net.connect_tcp Test coverage for security/landlock is 94.0% of 1525 lines according to gcc/gcov-14. Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250320190717.2287696-28-mic@digikod.net [mic: Update test coverage] Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
316d06b011 |
selftests/landlock: Add audit tests for filesystem
Test all filesystem blockers, including events with several records, and record with several blockers: - fs.execute - fs.write_file - fs.read_file - fs_read_dir - fs.remove_dir - fs.remove_file - fs.make_char - fs.make_dir - fs.make_reg - fs.make_sock - fs.make_fifo - fs.make_block - fs.make_sym - fs.refer - fs.truncate - fs.ioctl_dev - fs.change_topology Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250320190717.2287696-27-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
e1156872ef |
selftests/landlock: Add audit tests for abstract UNIX socket scoping
Add a new scoped_audit.connect_to_child test to check the abstract UNIX socket blocker. Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250320190717.2287696-26-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
e2893c0a69 |
selftests/landlock: Add audit tests for ptrace
Add tests for all ptrace actions checking "blockers=ptrace" records. This also improves PTRACE_TRACEME and PTRACE_ATTACH tests by making sure that the restrictions comes from Landlock, and with the expected process. These extended tests are like enhanced errno checks that make sure Landlock enforcement is consistent. Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250320190717.2287696-25-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
960ed6ca4c |
selftests/landlock: Test audit with restrict flags
Add audit_exec tests to filter Landlock denials according to cross-execution or muted subdomains. Add a wait-pipe-sandbox.c test program to sandbox itself and send a (denied) signals to its parent. Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250320190717.2287696-24-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
6a500b2297 |
selftests/landlock: Add tests for audit flags and domain IDs
Add audit_test.c to check with and without LANDLOCK_RESTRICT_SELF_* flags against the two Landlock audit record types: AUDIT_LANDLOCK_ACCESS and AUDIT_LANDLOCK_DOMAIN. Check consistency of domain IDs per layer in AUDIT_LANDLOCK_ACCESS and AUDIT_LANDLOCK_DOMAIN messages: denied access, domain allocation, and domain deallocation. These tests use signal scoping to make it simple. They are not in the scoped_signal_test.c file but in the new dedicated audit_test.c file. Tests are run with audit filters to ensure the audit records come from the test program. Moreover, because there can only be one audit process, tests would failed if run in parallel. Because of audit limitations, tests can only be run in the initial namespace. The audit test helpers were inspired by libaudit and tools/testing/selftests/net/netfilter/audit_logread.c Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Phil Sutter <phil@nwl.cc> Link: https://lore.kernel.org/r/20250320190717.2287696-23-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
e178b404ea |
selftests/landlock: Extend tests for landlock_restrict_self(2)'s flags
Add the base_test's restrict_self_fd_flags tests to align with previous restrict_self_fd tests but with the new LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF flag. Add the restrict_self_flags tests to check that LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF, LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON, and LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF are valid but not the next bit. Some checks are similar to restrict_self_checks_ordering's ones. Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250320190717.2287696-22-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
ec12a8d4c1 |
selftests/landlock: Add test for invalid ruleset file descriptor
To align with fs_test's layout1.inval and layout0.proc_nsfs which test EBADFD for landlock_add_rule(2), create a new base_test's restrict_self_fd which test EBADFD for landlock_restrict_self(2). Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250320190717.2287696-21-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
12bfcda73a |
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_*_EXEC_* flags
Most of the time we want to log denied access because they should not happen and such information helps diagnose issues. However, when sandboxing processes that we know will try to access denied resources (e.g. unknown, bogus, or malicious binary), we might want to not log related access requests that might fill up logs. By default, denied requests are logged until the task call execve(2). If the LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF flag is set, denied requests will not be logged for the same executed file. If the LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON flag is set, denied requests from after an execve(2) call will be logged. The rationale is that a program should know its own behavior, but not necessarily the behavior of other programs. Because LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF is set for a specific Landlock domain, it makes it possible to selectively mask some access requests that would be logged by a parent domain, which might be handy for unprivileged processes to limit logs. However, system administrators should still use the audit filtering mechanism. There is intentionally no audit nor sysctl configuration to re-enable these logs. This is delegated to the user space program. Increment the Landlock ABI version to reflect this interface change. Cc: Günther Noack <gnoack@google.com> Cc: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/20250320190717.2287696-18-mic@digikod.net [mic: Rename variables and fix __maybe_unused] Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Mickaël Salaün
|
c5efa393d8 |
selftests/landlock: Add a new test for setuid()
The new signal_scoping_thread_setuid tests check that the libc's
setuid() function works as expected even when a thread is sandboxed with
scoped signal restrictions.
Before the signal scoping fix, this test would have failed with the
setuid() call:
[pid 65] getpid() = 65
[pid 65] tgkill(65, 66, SIGRT_1) = -1 EPERM (Operation not permitted)
[pid 65] futex(0x40a66cdc, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 65] setuid(1001) = 0
After the fix, tgkill(2) is successfully leveraged to synchronize
credentials update across threads:
[pid 65] getpid() = 65
[pid 65] tgkill(65, 66, SIGRT_1) = 0
[pid 66] <... read resumed>0x40a65eb7, 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
[pid 66] --- SIGRT_1 {si_signo=SIGRT_1, si_code=SI_TKILL, si_pid=65, si_uid=1000} ---
[pid 66] getpid() = 65
[pid 66] setuid(1001) = 0
[pid 66] futex(0x40a66cdc, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 66] rt_sigreturn({mask=[]}) = 0
[pid 66] read(3, <unfinished ...>
[pid 65] setuid(1001) = 0
Test coverage for security/landlock is 92.9% of 1137 lines according to
gcc/gcov-14.
Fixes:
|
||
|
Mickaël Salaün
|
bbe7227403 |
selftests/landlock: Split signal_scoping_threads tests
Split signal_scoping_threads tests into signal_scoping_thread_before
and signal_scoping_thread_after.
Use local variables for thread synchronization. Fix exported function.
Replace some asserts with expects.
Fixes:
|
||
|
Mickaël Salaün
|
18eb75f3af |
landlock: Always allow signals between threads of the same process
Because Linux credentials are managed per thread, user space relies on some hack to synchronize credential update across threads from the same process. This is required by the Native POSIX Threads Library and implemented by set*id(2) wrappers and libcap(3) to use tgkill(2) to synchronize threads. See nptl(7) and libpsx(3). Furthermore, some runtimes like Go do not enable developers to have control over threads [1]. To avoid potential issues, and because threads are not security boundaries, let's relax the Landlock (optional) signal scoping to always allow signals sent between threads of the same process. This exception is similar to the __ptrace_may_access() one. hook_file_set_fowner() now checks if the target task is part of the same process as the caller. If this is the case, then the related signal triggered by the socket will always be allowed. Scoping of abstract UNIX sockets is not changed because kernel objects (e.g. sockets) should be tied to their creator's domain at creation time. Note that creating one Landlock domain per thread puts each of these threads (and their future children) in their own scope, which is probably not what users expect, especially in Go where we do not control threads. However, being able to drop permissions on all threads should not be restricted by signal scoping. We are working on a way to make it possible to atomically restrict all threads of a process with the same domain [2]. Add erratum for signal scoping. Closes: https://github.com/landlock-lsm/go-landlock/issues/36 Fixes: |
||
|
Linus Torvalds
|
ee6740fd34 |
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
||
|
Linus Torvalds
|
edb0e8f6e2 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
||
|
Linus Torvalds
|
2d09a9449e |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
|
||
|
Catalin Marinas
|
8cc14fdcc1 |
Merge branches 'for-next/amuv1-avg-freq', 'for-next/pkey_unrestricted', 'for-next/sysreg', 'for-next/misc', 'for-next/pgtable-cleanups', 'for-next/kselftest', 'for-next/uaccess-mops', 'for-next/pie-poe-cleanup', 'for-next/cputype-kryo', 'for-next/cca-dma-address', 'for-next/drop-pxd_table_bit' and 'for-next/spectre-bhb-assume-vulnerable', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf/arm_cspmu: Fix missing io.h include
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
perf/dwc_pcie: fix duplicate pci_dev devices
perf/dwc_pcie: fix some unreleased resources
perf/arm-cmn: Minor event type housekeeping
perf: arm_pmu: Move PMUv3-specific data
perf: apple_m1: Don't disable counter in m1_pmu_enable_event()
perf: arm_v7_pmu: Don't disable counter in (armv7|krait_|scorpion_)pmu_enable_event()
perf: arm_v7_pmu: Drop obvious comments for enabling/disabling counters and interrupts
perf: arm_pmuv3: Don't disable counter in armv8pmu_enable_event()
perf: arm_pmu: Don't disable counter in armpmu_add()
perf: arm_pmuv3: Call kvm_vcpu_pmu_resync_el0() before enabling counters
perf: arm_pmuv3: Add support for ARM Rainier PMU
* for-next/amuv1-avg-freq:
: Add support for AArch64 AMUv1-based average freq
arm64: Utilize for_each_cpu_wrap for reference lookup
arm64: Update AMU-based freq scale factor on entering idle
arm64: Provide an AMU-based version of arch_freq_get_on_cpu
cpufreq: Introduce an optional cpuinfo_avg_freq sysfs entry
cpufreq: Allow arch_freq_get_on_cpu to return an error
arch_topology: init capacity_freq_ref to 0
* for-next/pkey_unrestricted:
: mm/pkey: Add PKEY_UNRESTRICTED macro
selftest/powerpc/mm/pkey: fix build-break introduced by commit
|
||
|
Linus Torvalds
|
317a76a996 |
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner: - Consolidate the VDSO storage The VDSO data storage and data layout has been largely architecture specific for historical reasons. That increases the maintenance effort and causes inconsistencies over and over. There is no real technical reason for architecture specific layouts and implementations. The architecture specific details can easily be integrated into a generic layout, which also reduces the amount of duplicated code for managing the mappings. Convert all architectures over to a unified layout and common mapping infrastructure. This splits the VDSO data layout into subsystem specific blocks, timekeeping, random and architecture parts, which provides a better structure and allows to improve and update the functionalities without conflict and interaction. - Rework the timekeeping data storage The current implementation is designed for exposing system timekeeping accessors, which was good enough at the time when it was designed. PTP and Time Sensitive Networking (TSN) change that as there are requirements to expose independent PTP clocks, which are not related to system timekeeping. Replace the monolithic data storage by a structured layout, which allows to add support for independent PTP clocks on top while reusing both the data structures and the time accessor implementations. * tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) sparc/vdso: Always reject undefined references during linking x86/vdso: Always reject undefined references during linking vdso: Rework struct vdso_time_data and introduce struct vdso_clock vdso: Move architecture related data before basetime data powerpc/vdso: Prepare introduction of struct vdso_clock arm64/vdso: Prepare introduction of struct vdso_clock x86/vdso: Prepare introduction of struct vdso_clock time/namespace: Prepare introduction of struct vdso_clock vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct vdso/vsyscall: Prepare introduction of struct vdso_clock vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock vdso/gettimeofday: Prepare introduction of struct vdso_clock vdso/helpers: Prepare introduction of struct vdso_clock vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks vdso: Make vdso_time_data cacheline aligned arm64: Make asm/cache.h compatible with vDSO ... |
||
|
Eric Dumazet
|
a7c428ee8f |
tcp/dccp: remove icsk->icsk_timeout
icsk->icsk_timeout can be replaced by icsk->icsk_retransmit_timer.expires This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250324203607.703850-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
d5048d1176 |
Merge tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner: - Fix a memory ordering issue in posix-timers Posix-timer lookup is lockless and reevaluates the timer validity under the timer lock, but the update which validates the timer is not protected by the timer lock. That allows the store to be reordered against the initialization stores, so that the lookup side can observe a partially initialized timer. That's mostly a theoretical problem, but incorrect nevertheless. - Fix a long standing inconsistency of the coarse time getters The coarse time getters read the base time of the current update cycle without reading the actual hardware clock. NTP frequency adjustment can set the base time backwards. The fine grained interfaces compensate this by reading the clock and applying the new conversion factor, but the coarse grained time getters use the base time directly. That allows the user to observe time going backwards. Cure it by always forwarding base time, when NTP changes the frequency with an immediate step. - Rework of posix-timer hashing The posix-timer hash is not scalable and due to the CRIU timer restore mechanism prone to massive contention on the global hash bucket lock. Replace the global hash lock with a fine grained per bucket locking scheme to address that. - Rework the proc/$PID/timers interface. /proc/$PID/timers is provided for CRIU to be able to restore a timer. The printout happens with sighand lock held and interrupts disabled. That's not required as this can be done with RCU protection as well. - Provide a sane mechanism for CRIU to restore a timer ID CRIU restores timers by creating and deleting them until the kernel internal per process ID counter reached the requested ID. That's horribly slow for sparse timer IDs. Provide a prctl() which allows CRIU to restore a timer with a given ID. When enabled the ID pointer is used as input pointer to read the requested ID from user space. When disabled, the normal allocation scheme (next ID) is active as before. This is backwards compatible for both kernel and user space. - Make hrtimer_update_function() less expensive. The sanity checks are valuable, but expensive for high frequency usage in io/uring. Make the debug checks conditional and enable them only when lockdep is enabled. - Small updates, cleanups and improvements * tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) selftests/timers: Improve skew_consistency by testing with other clockids timekeeping: Fix possible inconsistencies in _COARSE clockids posix-timers: Drop redundant memset() invocation selftests/timers/posix-timers: Add a test for exact allocation mode posix-timers: Provide a mechanism to allocate a given timer ID posix-timers: Dont iterate /proc/$PID/timers with sighand:: Siglock held posix-timers: Make per process list RCU safe posix-timers: Avoid false cacheline sharing posix-timers: Switch to jhash32() posix-timers: Improve hash table performance posix-timers: Make signal_struct:: Next_posix_timer_id an atomic_t posix-timers: Make lock_timer() use guard() posix-timers: Rework timer removal posix-timers: Simplify lock/unlock_timer() posix-timers: Use guards in a few places posix-timers: Remove SLAB_PANIC from kmem cache posix-timers: Remove a few paranoid warnings posix-timers: Cleanup includes posix-timers: Add cond_resched() to posix_timer_add() search loop posix-timers: Initialise timer before adding it to the hash table ... |
||
|
Filipe Xavier
|
474eecc882 |
selftests: livepatch: test if ftrace can trace a livepatched function
This new test makes sure that ftrace can trace a function that was introduced by a livepatch. Signed-off-by: Filipe Xavier <felipeaggger@gmail.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20250324-ftrace-sftest-livepatch-v3-2-d9d7cc386c75@gmail.com Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
|
Filipe Xavier
|
2ca7cd8020 |
selftests: livepatch: add new ftrace helpers functions
Add new ftrace helpers functions cleanup_tracing, trace_function and check_traced_functions. Signed-off-by: Filipe Xavier <felipeaggger@gmail.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20250324-ftrace-sftest-livepatch-v3-1-d9d7cc386c75@gmail.com Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
|
Dmitry Safonov
|
edbac739e4 |
selftests/net: Drop timeout argument from test_client_verify()
It's always TEST_TIMEOUT_SEC, with an unjustified exception in rst test, that is more paranoia-long timeout rather than based on requirements. Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-7-da48040153d1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dmitry Safonov
|
1e1738faa2 |
selftests/net: Delete timeout from test_connect_socket()
Unused: it's always either the default timeout or asynchronous connect(). Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-6-da48040153d1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dmitry Safonov
|
266ed1ace8 |
selftests/net: Print the testing side in unsigned-md5
As both client and server print the same test name on failure or pass, add "[server]" so that it's more obvious from a log which side printed "ok" or "not ok". Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-5-da48040153d1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dmitry Safonov
|
3f36781e57 |
selftests/net: Add mixed select()+polling mode to TCP-AO tests
Currently, tcp_ao tests have two timeouts: TEST_RETRANSMIT_SEC and
TEST_TIMEOUT_SEC [by default 1 and 5 seconds]. The first one,
TEST_RETRANSMIT_SEC is used for operations that are expected to succeed
in order for a test to pass. It is usually not consumed and exists only
to avoid indefinite test run if the operation didn't complete.
The second one, TEST_RETRANSMIT_SEC exists for the tests that checking
operations, that are expected to fail/timeout. It is shorter as it is
fully consumed, with an expectation that if operation didn't succeed
during that period, it will timeout. And the related test that expects
the timeout is passing. The actual operation failure is then
cross-verified by other means like counters checks.
The issue with TEST_RETRANSMIT_SEC timeout is that 1 second is the exact
initial TCP timeout. So, in case the initial segment gets lost (quite
unlikely on local veth interface between two net namespaces, yet happens
in slow VMs), the retransmission never happens and as a result, the test
is not actually testing the functionality. Which in the end fails
counters checks.
As I want tcp_ao selftests to be fast and finishing in a reasonable
amount of time on manual run, I didn't consider increasing
TEST_RETRANSMIT_SEC.
Rather, initially, BPF_SOCK_OPS_TIMEOUT_INIT looked promising as a lever
to make the initial TCP timeout shorter. But as it's not a socket bpf
attached thing, but sock_ops (attaches to cgroups), the selftests would
have to use libbpf, which I wanted to avoid if not absolutely required.
Instead, use a mixed select() and counters polling mode with the longer
TEST_TIMEOUT_SEC timeout to detect running-away failed tests. It
actually not only allows losing segments and succeeding after
the previous TEST_RETRANSMIT_SEC timeout was consumed, but makes
the tests expecting timeout/failure pass faster.
The only test case taking longer (TEST_TIMEOUT_SEC) now is connect-deny
"wrong snd id", which checks for no key on SYN-ACK for which there is no
counter in the kernel (see tcp_make_synack()). Yet it can be speed up
by poking skpair from the trace event (see trace_tcp_ao_synack_no_key).
Fixes:
|
||
|
Dmitry Safonov
|
5a0a3193f6 |
selftests/net: Fetch and check TCP-MD5 counters
There are related TCP-MD5 <=> TCP and TCP-MD5 <=> TCP-AO tests that can benefit from checking the related counters, not only from validating operations timeouts. It also prepares the code for introduction of mixed select()+poll mode, see the follow-up patches. Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-3-da48040153d1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dmitry Safonov
|
1fe4221093 |
selftests/net: Provide tcp-ao counters comparison helper
Rename __test_tcp_ao_counters_cmp() into test_assert_counters_ao() and test_tcp_ao_key_counters_cmp() into test_assert_counters_key() as they are asserts, rather than just compare functions. Provide test_cmp_counters() helper, that's going to be used to compare ao_info and netns counters as a stop condition for polling the sockets. Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-2-da48040153d1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dmitry Safonov
|
65ffdf31be |
selftests/net: Print TCP flags in more common format
Before: ># 13145[lib/ftrace-tcp.c:427] trace event filter tcp_ao_key_not_found [2001:db8:1::1:-1 => 2001:db8:254::1:7010, L3index 0, flags: !FS!R!P!., keyid: 100, rnext: 100, maclen: -1, sne: -1] = 1 After: ># 13487[lib/ftrace-tcp.c:427] trace event filter tcp_ao_key_not_found [2001:db8:1::1:-1 => 2001:db8:254::1:7010, L3index 0, flags: S, keyid: 100, rnext: 100, maclen: -1, sne: -1] = 1 For the history, I think the initial format was to emphasize the absence of flags as well as their presence (!R meant no RST flag). But looking again, it's just unreadable and hard to understand. Make it the standard/expected one. Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-1-da48040153d1@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Song Liu
|
59481b8bd0 |
selftest/livepatch: Only run test-kprobe with CONFIG_KPROBES_ON_FTRACE
CONFIG_KPROBES_ON_FTRACE is required for test-kprobe. Skip test-kprobe when CONFIG_KPROBES_ON_FTRACE is not set. Since some kernel may not have /proc/config.gz, grep for kprobe_ftrace_ops from /proc/kallsyms to check whether CONFIG_KPROBES_ON_FTRACE is enabled. Signed-off-by: Song Liu <song@kernel.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/20250318181518.1055532-1-song@kernel.org [pmladek@suse.com: Call grep with -q option.] Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
|
Linus Torvalds
|
a49a879f0a |
Merge tag 'x86-cleanups-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar: "Miscellaneous x86 cleanups by Arnd Bergmann, Charles Han, Mirsad Todorovac, Randy Dunlap, Thorsten Blum and Zhang Kunbo" * tag 'x86-cleanups-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/coco: Replace 'static const cc_mask' with the newly introduced cc_get_mask() function x86/delay: Fix inconsistent whitespace selftests/x86/syscall: Fix coccinelle WARNING recommending the use of ARRAY_SIZE() x86/platform: Fix missing declaration of 'x86_apple_machine' x86/irq: Fix missing declaration of 'io_apic_irqs' x86/usercopy: Fix kernel-doc func param name in clean_cache_range()'s description x86/apic: Use str_disabled_enabled() helper in print_ipi_mode() |
||
|
Linus Torvalds
|
71b639af06 |
Merge tag 'x86-fpu-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/fpu updates from Ingo Molnar:
- Improve crypto performance by making kernel-mode FPU reliably usable
in softirqs ((Eric Biggers)
- Fully optimize out WARN_ON_FPU() (Eric Biggers)
- Initial steps to support Support Intel APX (Advanced Performance
Extensions) (Chang S. Bae)
- Fix KASAN for arch_dup_task_struct() (Benjamin Berg)
- Refine and simplify the FPU magic number check during signal return
(Chang S. Bae)
- Fix inconsistencies in guest FPU xfeatures (Chao Gao, Stanislav
Spassov)
- selftests/x86/xstate: Introduce common code for testing extended
states (Chang S. Bae)
- Misc fixes and cleanups (Borislav Petkov, Colin Ian King, Uros
Bizjak)
* tag 'x86-fpu-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Fix inconsistencies in guest FPU xfeatures
x86/fpu: Clarify the "xa" symbolic name used in the XSTATE* macros
x86/fpu: Use XSAVE{,OPT,C,S} and XRSTOR{,S} mnemonics in xstate.h
x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs
x86/fpu/xstate: Simplify print_xstate_features()
x86/fpu: Refine and simplify the magic number check during signal return
selftests/x86/xstate: Fix spelling mistake "hader" -> "header"
x86/fpu: Avoid copying dynamic FP state from init_task in arch_dup_task_struct()
vmlinux.lds.h: Remove entry to place init_task onto init_stack
selftests/x86/avx: Add AVX tests
selftests/x86/xstate: Clarify supported xstates
selftests/x86/xstate: Consolidate test invocations into a single entry
selftests/x86/xstate: Introduce signal ABI test
selftests/x86/xstate: Refactor ptrace ABI test
selftests/x86/xstate: Refactor context switching test
selftests/x86/xstate: Enumerate and name xstate components
selftests/x86/xstate: Refactor XSAVE helpers for general use
selftests/x86: Consolidate redundant signal helper functions
x86/fpu: Fix guest FPU state buffer allocation size
x86/fpu: Fully optimize out WARN_ON_FPU()
|
||
|
Linus Torvalds
|
e34c38057a |
Merge tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
|
||
|
Linus Torvalds
|
32b22538be |
Merge tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
|
||
|
Linus Torvalds
|
3ba7dfb8da |
Merge tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Boqun Feng:
"Documentation:
- Add broken-timing possibility to stallwarn.rst
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr()
- Document self-propagating callbacks
- Point call_srcu() to call_rcu() for detailed memory ordering
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text
- Remove references to old grace-period-wait primitives
srcu:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock
at the cost of calling synchronize_rcu() in synchronize_srcu()
Moreover, by returning the percpu offset of the counter at
srcu_read_lock_fast() time, srcu_read_unlock_fast() can avoid
extra pointer dereferencing, which makes it faster than
srcu_read_{un,}lock_lite()
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible
RCU torture:
- Add get_torture_init_jiffies() to return the start time of the test
- Add a test_boost_holdoff module parameter to allow delaying
boosting tests when building rcutorture as built-in
- Add grace period sequence number logging at the beginning and end
of failure/close-call results
- Switch to hexadecimal for the expedited grace period sequence
number in the rcu_exp_grace_period trace point
- Make cur_ops->format_gp_seqs take buffer length
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
- Complain when invalid SRCU reader_flavor is specified
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing
Misc:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes()
- Fix get_state_synchronize_rcu_full() GP-start detection
- Move RCU Tasks self-tests to core_initcall()
- Print segment lengths in show_rcu_nocb_gp_state()
- Make RCU watch ct_kernel_exit_state() warning
- Flush console log from kernel_power_off()
- rcutorture: Allow a negative value for nfakewriters
- rcu: Update TREE05.boot to test normal synchronize_rcu()
- rcu: Use _full() API to debug synchronize_rcu()
Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs()
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY
- Update __cond_resched comment about RCU quiescent states
- Handle unstable rdp in rcu_read_unlock_strict()
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y
- osnoise: Provide quiescent states
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination
- Limit PREEMPT_RCU configurations
- Make rcutorture senario TREE07 and senario TREE10 use
PREEMPT_LAZY=y"
* tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcutorture: Make scenario TREE07 build CONFIG_PREEMPT_LAZY=y
rcutorture: Make scenario TREE10 build CONFIG_PREEMPT_LAZY=y
rcu: limit PREEMPT_RCU configurations
rcutorture: Update ->extendables check for lazy preemption
rcutorture: Update rcutorture_one_extend_check() for lazy preemption
osnoise: provide quiescent states
rcu: Use _full() API to debug synchronize_rcu()
rcu: Update TREE05.boot to test normal synchronize_rcu()
rcutorture: Allow a negative value for nfakewriters
Flush console log from kernel_power_off()
context_tracking: Make RCU watch ct_kernel_exit_state() warning
rcu/nocb: Print segment lengths in show_rcu_nocb_gp_state()
rcu-tasks: Move RCU Tasks self-tests to core_initcall()
rcu: Fix get_state_synchronize_rcu_full() GP-start detection
torture: Make SRCU lockdep testing use srcu_read_lock_nmisafe()
srcu: Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing
rcutorture: Complain when invalid SRCU reader_flavor is specified
rcutorture: Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
rcutorture: Make cur_ops->format_gp_seqs take buffer length
rcutorture: Add ftrace-compatible timestamp to GP# failure/close-call output
...
|